[PATCH v3 0/2] clk: bcm2835: PCM clock improvements

[PATCH v3 0/2] clk: bcm2835: PCM clock improvements

[Phil Elwell]

The switch to using the upstream bcm2835_cprman clock driver caused a
few problems for users of PCM (I2S) peripherals. Audio applications
require accurate, stable clocks, and the cprman driver wasn't
conservative enough in its choice of clock sources.

These patches restrict the clock sources for the PCM peripheral in two
ways: the first causes all possible sources except OSC and PLLD_PER
to be ignored, while the second allows clocks to be specified as
"low_jitter", causing the effects of fractional divisors to be taken
into account when comparing potential clocks for accuracy. In practice,
the combined effect of the two patches is to choose OSC as a source if
an integer divisor can be used, otherwise PLLD_PER is chosen.

Changes in v3:
* Elimination of temporary variable from patch 2.

Changes in v2:
* Extended bcm2835_pcm_per_parents to cover the pllh_aux slot, and gave
  it a comment in patch 1.
* Added a REGISTER_PCM_CLK analagous to REGISTER_PER_CLK in patch 1.
* Renamed temporary variable idiv to int_div in patch 2.

Phil Elwell (2):
  clk: bcm2835: Limit PCM clock to OSC and PLLD_PER
  clk: bcm2835: Minimise clock jitter for PCM clock

 drivers/clk/bcm/clk-bcm2835.c | 50 ++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 45 insertions(+), 5 deletions(-)

-- 
1.9.1

Re: [PATCH v3 0/2] clk: bcm2835: PCM clock improvements

[Stefan Wahren]

> Phil Elwell <phil@raspberrypi.org> hat am 1. Juni 2017 um 11:10 geschrieben:
> 
> 
> The switch to using the upstream bcm2835_cprman clock driver caused a
> few problems for users of PCM (I2S) peripherals. Audio applications
> require accurate, stable clocks, and the cprman driver wasn't
> conservative enough in its choice of clock sources.
> 
> These patches restrict the clock sources for the PCM peripheral in two
> ways: the first causes all possible sources except OSC and PLLD_PER
> to be ignored, while the second allows clocks to be specified as
> "low_jitter", causing the effects of fractional divisors to be taken
> into account when comparing potential clocks for accuracy. In practice,
> the combined effect of the two patches is to choose OSC as a source if
> an integer divisor can be used, otherwise PLLD_PER is chosen.
> 
> Changes in v3:
> * Elimination of temporary variable from patch 2.

Acked-by: Stefan Wahren <stefan.wahren@i2se.com>

still applies to the complete series