Re: [PATCH 0/3] Add MHI Endpoint network driver

[Andrew Lunn <andrew@lunn.ch>]

On Tue, Jun 06, 2023 at 06:01:16PM +0530, Manivannan Sadhasivam wrote:
> Hi,
> 
> This series adds a network driver for the Modem Host Interface (MHI) endpoint
> devices that provides network interfaces to the PCIe based Qualcomm endpoint
> devices supporting MHI bus (like Modems). This driver allows the MHI endpoint
> devices to establish IP communication with the host machines (x86, ARM64) over
> MHI bus.
> 
> On the host side, the existing mhi_net driver provides the network connectivity
> to the host.
> 
> - Mani
> 
> Manivannan Sadhasivam (3):
>   net: Add MHI Endpoint network driver
>   MAINTAINERS: Add entry for MHI networking drivers under MHI bus
>   net: mhi: Increase the default MTU from 16K to 32K
> 
>  MAINTAINERS              |   1 +
>  drivers/net/Kconfig      |   9 ++
>  drivers/net/Makefile     |   1 +
>  drivers/net/mhi_ep_net.c | 331 +++++++++++++++++++++++++++++++++++++++
>  drivers/net/mhi_net.c    |   2 +-

Should we add a drivers/net/modem directory? Maybe modem is too
generic, we want something which represents GSM, LTE, UMTS, 3G, 4G,
5G, ... XG etc.

    Andrew