Re: [PATCH v2 0/2] soc: ti: add k3 platforms chipid module driver

[Tero Kristo <t-kristo@ti.com>]

On 05/05/2020 22:34, Grygorii Strashko wrote:
> Hi All,
> 
> This series introduces TI K3 Multicore SoC platforms chipid module driver
> which provides identification support of the TI K3 SoCs (family, revision)
> and register this information with the SoC bus. It is available under
> /sys/devices/soc0/ for user space, and can be checked, where needed,
> in Kernel using soc_device_match().
> It is also required for introducing support for new revisions of
> K3 AM65x/J721E SoCs.
> 
> Example J721E:
>    # cat /sys/devices/soc0/{machine,family,revision}
>    Texas Instruments K3 J721E SoC
>    J721E
>    SR1.0
> 
> Example AM65x:
>    # cat /sys/devices/soc0/{machine,family,revision}
>    Texas Instruments AM654 Base Board
>    AM65X
>    SR1.0
> 
> Changes in v2:
>   - pr_debug() replaced with pr_info() to show SoC info on init
>   - minor format change
>   - split series on driver and platform changes
>   - add Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
> 
> v1: https://lwn.net/Articles/818577/
> 
> Grygorii Strashko (2):
>    dt-bindings: soc: ti: add binding for k3 platforms chipid module
>    soc: ti: add k3 platforms chipid module driver
> 
>   .../bindings/soc/ti/k3-socinfo.yaml           |  40 ++++++
>   drivers/soc/ti/Kconfig                        |  10 ++
>   drivers/soc/ti/Makefile                       |   1 +
>   drivers/soc/ti/k3-socinfo.c                   | 135 ++++++++++++++++++
>   4 files changed, 186 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
>   create mode 100644 drivers/soc/ti/k3-socinfo.c
> 

Got a minor comments on patch #2, other than that looks fine to me. Once 
that is fixed, for whole series:

Reviewed-by: Tero Kristo <t-kristo@ti.com>
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki