Re: [PATCH v8 4/5] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 3.01.2025 8:31 AM, Luo Jie wrote:
> The CMN PLL clock controller allows selection of an input clock rate
> from a defined set of input clock rates. It in-turn supplies fixed
> rate output clocks to the hardware blocks that provide the ethernet
> functions such as PPE (Packet Process Engine) and connected switch or
> PHY, and to GCC.
> 
> The reference clock of CMN PLL is routed from XO to the CMN PLL through
> the internal WiFi block.
> .XO (48 MHZ or 96 MHZ)-->WiFi (multiplier/divider)-->48 MHZ to CMN PLL.
> 
> The reference input clock from WiFi to CMN PLL is fully controlled by
> the bootstrap pins which select the XO frequency (48 MHZ or 96 MHZ).
> Based on this frequency, the divider in the internal Wi-Fi block is
> automatically configured by hardware (1 for 48 MHZ, 2 for 96 MHZ), to
> ensure output clock to CMN PLL is 48 MHZ.
> 
> Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad