From: wen.yang@linux.dev
To: Joel Granados <joel.granados@kernel.org>
Cc: Wen Yang <wen.yang@linux.dev>,
linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [RFC PATCH 21/39] sysctl: refresh device-dependent bounds per call
Date: Thu, 29 Oct 2026 00:35:00 +0800 [thread overview]
Message-ID: <c96f489625c12846bd4f8b41bd89b027beb9013a.1793204511.git.wen.yang@linux.dev> (raw)
In-Reply-To: <cover.1793204511.git.wen.yang@linux.dev>
From: Wen Yang <wen.yang@linux.dev>
Refresh device-dependent limits before validating sysctl writes.
Suggested-by: Joel Granados <joel.granados@kernel.org>
Signed-off-by: Wen Yang <wen.yang@linux.dev>
---
drivers/base/power/main.c | 21 +++++++++++++++------
drivers/gpu/drm/i915/i915_perf.c | 19 ++++++++++++++-----
2 files changed, 29 insertions(+), 11 deletions(-)
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 88a31e09e4f3..8346875a4fa2 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -543,7 +543,6 @@ MODULE_PARM_DESC(dpm_watchdog_enabled, "Enable DPM watchdog");
static unsigned int __read_mostly dpm_watchdog_timeout = CONFIG_DPM_WATCHDOG_TIMEOUT;
static unsigned int __read_mostly dpm_watchdog_warning_timeout =
CONFIG_DPM_WATCHDOG_WARNING_TIMEOUT;
-static const unsigned int dpm_watchdog_timeout_max = CONFIG_DPM_WATCHDOG_TIMEOUT;
static int proc_dodpm_watchdog_timeout_secs(const struct ctl_table *table,
int write, void *buffer,
@@ -565,23 +564,33 @@ static int proc_dodpm_watchdog_timeout_secs(const struct ctl_table *table,
return 0;
}
+static int proc_dodpm_watchdog_warning_timeout_secs(const struct ctl_table *table,
+ int write, void *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ struct ctl_table tmp = *table;
+
+ tmp.max = READ_ONCE(dpm_watchdog_timeout);
+ return proc_douintvec_minmax(&tmp, write, buffer, lenp, ppos);
+}
+
static const struct ctl_table dpm_watchdog_sysctls[] = {
{
.procname = "dpm_watchdog_timeout_secs",
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dodpm_watchdog_timeout_secs,
- .extra1 = SYSCTL_ONE,
- .extra2 = (void *)&dpm_watchdog_timeout_max,
+ .min = 1,
+ .max = CONFIG_DPM_WATCHDOG_TIMEOUT,
},
{
.procname = "dpm_watchdog_warning_timeout_secs",
.data = &dpm_watchdog_warning_timeout,
.maxlen = sizeof(unsigned int),
.mode = 0644,
- .proc_handler = proc_douintvec_minmax,
- .extra1 = SYSCTL_ONE,
- .extra2 = (void *)&dpm_watchdog_timeout,
+ .proc_handler = proc_dodpm_watchdog_warning_timeout_secs,
+ .min = 1,
+ .max = UINT_MAX,
},
};
diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
index 19b82427aa41..2e758f2008db 100644
--- a/drivers/gpu/drm/i915/i915_perf.c
+++ b/drivers/gpu/drm/i915/i915_perf.c
@@ -4795,6 +4795,15 @@ int i915_perf_remove_config_ioctl(struct drm_device *dev, void *data,
return ret;
}
+static int oa_max_sample_rate_handler(const struct ctl_table *table, int write,
+ void *buffer, size_t *lenp, loff_t *ppos)
+{
+ struct ctl_table tmp = *table;
+
+ tmp.max = (unsigned long)READ_ONCE(oa_sample_rate_hard_limit);
+ return proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos);
+}
+
static const struct ctl_table oa_table[] = {
{
.procname = "perf_stream_paranoid",
@@ -4802,17 +4811,17 @@ static const struct ctl_table oa_table[] = {
.maxlen = sizeof(i915_perf_stream_paranoid),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
- .extra1 = SYSCTL_ZERO,
- .extra2 = SYSCTL_ONE,
+ .min = 0,
+ .max = 1,
},
{
.procname = "oa_max_sample_rate",
.data = &i915_oa_max_sample_rate,
.maxlen = sizeof(i915_oa_max_sample_rate),
.mode = 0644,
- .proc_handler = proc_dointvec_minmax,
- .extra1 = SYSCTL_ZERO,
- .extra2 = &oa_sample_rate_hard_limit,
+ .proc_handler = oa_max_sample_rate_handler,
+ .min = 0,
+ .max = INT_MAX,
},
};
--
2.25.1
next prev parent reply other threads:[~2026-10-28 16:37 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-28 16:34 [RFC PATCH 00/39] sysctl: replace overloaded extra pointers with typed bounds and context wen.yang
2026-10-28 16:34 ` [RFC PATCH 01/39] " wen.yang
2026-10-28 21:09 ` David Laight
2026-10-28 16:34 ` [RFC PATCH 02/39] test_sysctl: convert bounds to numeric values wen.yang
2026-10-28 16:34 ` [RFC PATCH 03/39] sysctl: add KUnit coverage for numeric bounds and handlers wen.yang
2026-10-28 16:34 ` [RFC PATCH 04/39] sysctl: cover runtime ranges and context lifecycles in KUnit wen.yang
2026-10-28 16:34 ` [RFC PATCH 05/39] sysctl: cover priv in KUnit and the debug test module wen.yang
2026-10-28 16:34 ` [RFC PATCH 06/39] sysctl: convert core table bounds to numeric values wen.yang
2026-10-28 16:34 ` [RFC PATCH 07/39] sysctl: store architecture sysctl bounds by value wen.yang
2026-10-28 16:34 ` [RFC PATCH 08/39] sysctl: store crypto " wen.yang
2026-10-28 16:34 ` [RFC PATCH 09/39] sysctl: store device " wen.yang
2026-10-28 16:34 ` [RFC PATCH 10/39] sysctl: store filesystem " wen.yang
2026-10-28 16:34 ` [RFC PATCH 11/39] sysctl: store message-queue " wen.yang
2026-10-28 16:34 ` [RFC PATCH 12/39] sysctl: store kernel " wen.yang
2026-10-28 16:34 ` [RFC PATCH 13/39] sysctl: store memory-management " wen.yang
2026-10-28 16:34 ` [RFC PATCH 14/39] sysctl: store IPv6 scalar " wen.yang
2026-10-28 16:34 ` [RFC PATCH 15/39] sysctl: store netfilter " wen.yang
2026-10-28 16:34 ` [RFC PATCH 16/39] sysctl: store RPC " wen.yang
2026-10-28 16:34 ` [RFC PATCH 17/39] sysctl: store remaining network " wen.yang
2026-10-28 16:34 ` [RFC PATCH 18/39] sysctl: store security " wen.yang
2026-10-28 16:34 ` [RFC PATCH 19/39] io_uring: store its " wen.yang
2026-10-28 16:34 ` [RFC PATCH 20/39] sysctl: refresh dynamic scheduler and PID bounds per call wen.yang
2026-10-28 16:35 ` wen.yang [this message]
2026-10-28 16:35 ` [RFC PATCH 22/39] sysctl: refresh namespace IPC " wen.yang
2026-10-28 16:35 ` [RFC PATCH 23/39] yama: preserve scope locking with numeric sysctl bounds wen.yang
2026-10-28 16:35 ` [RFC PATCH 24/39] net: refresh core sysctl limits without bound pointers wen.yang
2026-10-28 16:35 ` [RFC PATCH 25/39] sctp: resolve numeric ranges from the current namespace wen.yang
2026-10-28 16:35 ` [RFC PATCH 26/39] rds: preserve live reconnect limits with numeric bounds wen.yang
2026-10-28 16:35 ` [RFC PATCH 27/39] ipv4: preserve live and vector bounds with numeric sysctls wen.yang
2026-10-28 16:35 ` [RFC PATCH 28/39] net: refresh fragment and remaining dynamic sysctl bounds wen.yang
2026-10-28 16:35 ` [RFC PATCH 29/39] neighbour: derive sysctl ownership independently of bounds wen.yang
2026-10-28 16:35 ` [RFC PATCH 30/39] net: resolve sysctl owners from their backing data wen.yang
2026-10-28 16:35 ` [RFC PATCH 31/39] ipvs: derive sysctl ownership from numeric storage wen.yang
2026-10-28 16:35 ` [RFC PATCH 32/39] sysctl: remove obsolete nr_open bound variables wen.yang
2026-10-28 16:35 ` [RFC PATCH 33/39] ipv6: move address sysctl context to priv wen.yang
2026-10-28 16:35 ` [RFC PATCH 34/39] ipv4: move device " wen.yang
2026-10-28 16:35 ` [RFC PATCH 35/39] netfilter: move logger " wen.yang
2026-10-28 16:35 ` [RFC PATCH 36/39] parport: move device " wen.yang
2026-10-28 16:35 ` [RFC PATCH 37/39] net: move namespace " wen.yang
2026-10-28 16:35 ` [RFC PATCH 38/39] arm64: move vector-length " wen.yang
2026-10-28 16:35 ` [RFC PATCH 39/39] sysctl: remove the extra pointers and the compatibility bounds read wen.yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c96f489625c12846bd4f8b41bd89b027beb9013a.1793204511.git.wen.yang@linux.dev \
--to=wen.yang@linux.dev \
--cc=joel.granados@kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®