mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Zhangfei Gao <zhangfei.gao@linaro.org>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Arnd Bergmann <arnd@arndb.de>,
	jean-philippe <jean-philippe@linaro.org>,
	kenneth-lee-2012@foxmail.com, Wangzhou <wangzhou1@hisilicon.com>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Sinan Kaya <okaya@kernel.org>
Subject: Re: [RFC PATCH] PCI: Remove End-End TLP as PASID dependency
Date: Sat, 13 Jun 2020 21:49:19 +0800	[thread overview]
Message-ID: <c981ed09-5fe2-b0ca-b023-ba7e8882832a@linaro.org> (raw)
In-Reply-To: <20200611174140.GA1597601@bjorn-Precision-5520>



On 2020/6/12 上午1:41, Bjorn Helgaas wrote:
> [+cc Sinan]
>
> On Wed, Jun 10, 2020 at 12:18:14PM +0800, Zhangfei Gao wrote:
>> Some platform devices appear as PCI and have PCI cfg space,
>> but are actually on the AMBA bus.
>> They can support PASID via smmu stall feature, but does not
>> support tlp since they are not real pci devices.
>> So remove tlp as a PASID dependency.
> When you iterate on this, pay attention to things like:
>
>    - Wrap paragraphs to 75 columns or so, so they fill the whole line
>      but don't overflow when "git show" adds 4 spaces.
>
>    - Leave a blank line between paragraphs.
>
>    - Capitalize consistently: "SMMU", "PCI", "TLP".
>
>    - Provide references to relevant spec sections, e.g., for the SMMU
>      stall feature.
OK, Thanks Bjorn
>
>> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
>> ---
>>   drivers/pci/ats.c | 3 ---
>>   1 file changed, 3 deletions(-)
>>
>> diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
>> index 390e92f..8e31278 100644
>> --- a/drivers/pci/ats.c
>> +++ b/drivers/pci/ats.c
>> @@ -344,9 +344,6 @@ int pci_enable_pasid(struct pci_dev *pdev, int features)
>>   	if (WARN_ON(pdev->pasid_enabled))
>>   		return -EBUSY;
>>   
>> -	if (!pdev->eetlp_prefix_path)
>> -		return -EINVAL;
> No.  This would mean we might enable PASID on actual PCIe devices when
> it is not safe to do so, as Jean-Philippe pointed out.
>
> You cannot break actual PCIe devices just to make your non-PCIe device
> work.
>
> These devices do not support PASID as defined in the PCIe spec.  They
> might support something *like* PASID, and you might be able to make
> parts of the PCI core work with them, but you're going to have to deal
> with the parts that don't follow the PCIe spec on your own.  That
> might be quirks, it might be some sort of AMBA adaptation shim, I
> don't know.  But it's not the responsibility of the PCI core to adapt
> to them.
Understand now.
Will continue use quirk for this.

Thanks

      reply	other threads:[~2020-06-13 13:50 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-10  4:18 Zhangfei Gao
2020-06-10  7:46 ` Jean-Philippe Brucker
2020-06-10  8:00   ` Zhangfei Gao
2020-06-11 14:11     ` Sinan Kaya
2020-06-11 17:41 ` Bjorn Helgaas
2020-06-13 13:49   ` Zhangfei Gao [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c981ed09-5fe2-b0ca-b023-ba7e8882832a@linaro.org \
    --to=zhangfei.gao@linaro.org \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=helgaas@kernel.org \
    --cc=jean-philippe@linaro.org \
    --cc=kenneth-lee-2012@foxmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=okaya@kernel.org \
    --cc=wangzhou1@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®