* [PATCH] drivers: clk: zynqmp: Allow zero divisor value
@ 2019-03-04 23:27 Jolly Shah
2019-03-18 12:48 ` Michal Simek
2019-04-11 18:32 ` Stephen Boyd
0 siblings, 2 replies; 5+ messages in thread
From: Jolly Shah @ 2019-03-04 23:27 UTC (permalink / raw)
To: mturquette, sboyd, michal.simek, linux-clk
Cc: rajanv, linux-arm-kernel, linux-kernel, Rajan Vaja, Jolly Shah
From: Rajan Vaja <rajan.vaja@xilinx.com>
Zero divider is valid and default for some of ZynqMP
clocks. Allow zero divisor when CLK_DIVIDER_ALLOW_ZERO
for the clock is set.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
---
drivers/clk/zynqmp/divider.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c
index a371c66..e146b6f 100644
--- a/drivers/clk/zynqmp/divider.c
+++ b/drivers/clk/zynqmp/divider.c
@@ -76,6 +76,13 @@ static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw,
else
value = div >> 16;
+ if (!value) {
+ WARN(!(divider->flags & CLK_DIVIDER_ALLOW_ZERO),
+ "%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n",
+ clk_name);
+ return parent_rate;
+ }
+
return DIV_ROUND_UP_ULL(parent_rate, value);
}
--
2.7.4
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] drivers: clk: zynqmp: Allow zero divisor value
2019-03-04 23:27 [PATCH] drivers: clk: zynqmp: Allow zero divisor value Jolly Shah
@ 2019-03-18 12:48 ` Michal Simek
2019-03-18 19:42 ` Stephen Boyd
2019-04-11 18:32 ` Stephen Boyd
1 sibling, 1 reply; 5+ messages in thread
From: Michal Simek @ 2019-03-18 12:48 UTC (permalink / raw)
To: Jolly Shah, mturquette, sboyd, michal.simek, linux-clk
Cc: rajanv, linux-arm-kernel, linux-kernel, Rajan Vaja, Jolly Shah
On 05. 03. 19 0:27, Jolly Shah wrote:
> From: Rajan Vaja <rajan.vaja@xilinx.com>
>
> Zero divider is valid and default for some of ZynqMP
> clocks. Allow zero divisor when CLK_DIVIDER_ALLOW_ZERO
> for the clock is set.
>
> Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
> Signed-off-by: Jolly Shah <jollys@xilinx.com>
> ---
> drivers/clk/zynqmp/divider.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c
> index a371c66..e146b6f 100644
> --- a/drivers/clk/zynqmp/divider.c
> +++ b/drivers/clk/zynqmp/divider.c
> @@ -76,6 +76,13 @@ static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw,
> else
> value = div >> 16;
>
> + if (!value) {
> + WARN(!(divider->flags & CLK_DIVIDER_ALLOW_ZERO),
> + "%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n",
> + clk_name);
> + return parent_rate;
> + }
> +
> return DIV_ROUND_UP_ULL(parent_rate, value);
> }
>
>
Stephen: Do you want to take it via your tree?
Thanks,
Michal
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] drivers: clk: zynqmp: Allow zero divisor value
2019-03-18 12:48 ` Michal Simek
@ 2019-03-18 19:42 ` Stephen Boyd
2019-03-19 7:19 ` Michal Simek
0 siblings, 1 reply; 5+ messages in thread
From: Stephen Boyd @ 2019-03-18 19:42 UTC (permalink / raw)
To: Jolly Shah, linux-clk, michal.simek, mturquette, sboyd
Cc: rajanv, linux-arm-kernel, linux-kernel, Rajan Vaja, Jolly Shah
Quoting Michal Simek (2019-03-18 05:48:52)
> On 05. 03. 19 0:27, Jolly Shah wrote:
> > From: Rajan Vaja <rajan.vaja@xilinx.com>
> >
> > Zero divider is valid and default for some of ZynqMP
> > clocks. Allow zero divisor when CLK_DIVIDER_ALLOW_ZERO
> > for the clock is set.
> >
> > Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
> > Signed-off-by: Jolly Shah <jollys@xilinx.com>
> > ---
> > drivers/clk/zynqmp/divider.c | 7 +++++++
> > 1 file changed, 7 insertions(+)
> >
> > diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c
> > index a371c66..e146b6f 100644
> > --- a/drivers/clk/zynqmp/divider.c
> > +++ b/drivers/clk/zynqmp/divider.c
> > @@ -76,6 +76,13 @@ static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw,
> > else
> > value = div >> 16;
> >
> > + if (!value) {
> > + WARN(!(divider->flags & CLK_DIVIDER_ALLOW_ZERO),
> > + "%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n",
> > + clk_name);
> > + return parent_rate;
> > + }
> > +
> > return DIV_ROUND_UP_ULL(parent_rate, value);
> > }
> >
> >
>
> Stephen: Do you want to take it via your tree?
>
Sure.
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] drivers: clk: zynqmp: Allow zero divisor value
2019-03-18 19:42 ` Stephen Boyd
@ 2019-03-19 7:19 ` Michal Simek
0 siblings, 0 replies; 5+ messages in thread
From: Michal Simek @ 2019-03-19 7:19 UTC (permalink / raw)
To: Stephen Boyd, Jolly Shah, linux-clk, michal.simek, mturquette, sboyd
Cc: rajanv, linux-arm-kernel, linux-kernel, Rajan Vaja, Jolly Shah
On 18. 03. 19 20:42, Stephen Boyd wrote:
> Quoting Michal Simek (2019-03-18 05:48:52)
>> On 05. 03. 19 0:27, Jolly Shah wrote:
>>> From: Rajan Vaja <rajan.vaja@xilinx.com>
>>>
>>> Zero divider is valid and default for some of ZynqMP
>>> clocks. Allow zero divisor when CLK_DIVIDER_ALLOW_ZERO
>>> for the clock is set.
>>>
>>> Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
>>> Signed-off-by: Jolly Shah <jollys@xilinx.com>
>>> ---
>>> drivers/clk/zynqmp/divider.c | 7 +++++++
>>> 1 file changed, 7 insertions(+)
>>>
>>> diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c
>>> index a371c66..e146b6f 100644
>>> --- a/drivers/clk/zynqmp/divider.c
>>> +++ b/drivers/clk/zynqmp/divider.c
>>> @@ -76,6 +76,13 @@ static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw,
>>> else
>>> value = div >> 16;
>>>
>>> + if (!value) {
>>> + WARN(!(divider->flags & CLK_DIVIDER_ALLOW_ZERO),
>>> + "%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n",
>>> + clk_name);
>>> + return parent_rate;
>>> + }
>>> +
>>> return DIV_ROUND_UP_ULL(parent_rate, value);
>>> }
>>>
>>>
>>
>> Stephen: Do you want to take it via your tree?
>>
>
> Sure.
ok. Then your turn with that two patches when you have time.
Thanks,
Michal
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] drivers: clk: zynqmp: Allow zero divisor value
2019-03-04 23:27 [PATCH] drivers: clk: zynqmp: Allow zero divisor value Jolly Shah
2019-03-18 12:48 ` Michal Simek
@ 2019-04-11 18:32 ` Stephen Boyd
1 sibling, 0 replies; 5+ messages in thread
From: Stephen Boyd @ 2019-04-11 18:32 UTC (permalink / raw)
To: Jolly Shah, linux-clk, michal.simek, mturquette, sboyd
Cc: rajanv, linux-arm-kernel, linux-kernel, Rajan Vaja, Jolly Shah
Quoting Jolly Shah (2019-03-04 15:27:46)
> From: Rajan Vaja <rajan.vaja@xilinx.com>
>
> Zero divider is valid and default for some of ZynqMP
> clocks. Allow zero divisor when CLK_DIVIDER_ALLOW_ZERO
> for the clock is set.
>
> Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
> Signed-off-by: Jolly Shah <jollys@xilinx.com>
> ---
Applied to clk-next
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-04-11 18:32 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-04 23:27 [PATCH] drivers: clk: zynqmp: Allow zero divisor value Jolly Shah
2019-03-18 12:48 ` Michal Simek
2019-03-18 19:42 ` Stephen Boyd
2019-03-19 7:19 ` Michal Simek
2019-04-11 18:32 ` Stephen Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®