mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v2 0/2] iio: chemical: sgp30: Support SGP30 / SGPC3 Gas Sensors
@ 2018-03-10 22:06 Andreas Brauchli
  0 siblings, 0 replies; only message in thread
From: Andreas Brauchli @ 2018-03-10 22:06 UTC (permalink / raw)
  To: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	Peter Meerwald-Stadler, Rob Herring, Mark Rutland,
	Jonathan Corbet
  Cc: linux-iio, linux-kernel

This patch series adds support for Sensirion SGP30 and SGPC3 I2C gas
sensors.

Further product specs available from:
https://www.sensirion.com/en/environmental-sensors/gas-sensors/multi-pixel-gas-sensors/
https://www.sensirion.com/en/about-us/links/#c15360

Patch 1/2 add new IIO modifiers used by the driver
Patch 2/2 add sgp30/sgpc3 driver and documentation

Major changes to v1:
* Driver renamed to sgp30
* No or minimal sensor knowledge required to use the device:
  automatic fixed interval polling (see next point) and initialization.
* Background thread for IAQ polling
* Remove triggered-buffers support
* Add new IIO modifiers for ethanol and H2
* Support for SGPC3 product increment ("feature set 0.6") including 
  humidity compensation and an ultra-low power mode. Unfortunately, the
  datasheet for this new SGPC3 has not been released yet.
* ABI/DT Documentation

Many thanks to Peter Meerwald-Standler and Jonathan Cameron for their most valuable feedback on v1.

Andreas Brauchli (2):
  iio: Add modifiers for ethanol and H2 gases
  iio: chemical: sgp30: Support Sensirion SGPxx sensors

 Documentation/ABI/testing/sysfs-bus-iio            |    4 +
 .../ABI/testing/sysfs-bus-iio-chemical-sgp30       |   62 ++
 .../bindings/iio/chemical/sensirion,sgp30.txt      |   15 +
 Documentation/iio/chemical/sgp30.txt               |   97 ++
 drivers/iio/chemical/Kconfig                       |   13 +
 drivers/iio/chemical/Makefile                      |    1 +
 drivers/iio/chemical/sgp30.c                       | 1120 ++++++++++++++++++++
 include/uapi/linux/iio/types.h                     |    2 +
 tools/iio/iio_event_monitor.c                      |    4 +
 9 files changed, 1318 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-chemical-sgp30
 create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt
 create mode 100644 Documentation/iio/chemical/sgp30.txt
 create mode 100644 drivers/iio/chemical/sgp30.c

-- 
2.15.1

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2018-03-10 22:07 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-10 22:06 [PATCH v2 0/2] iio: chemical: sgp30: Support SGP30 / SGPC3 Gas Sensors Andreas Brauchli

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®