From: Finn Thain <fthain@telegraphics.com.au>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Schmitz <schmitzmic@gmail.com>,
<linuxppc-dev@lists.ozlabs.org>,
<linux-m68k@lists.linux-m68k.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v4 04/11] macintosh/via-pmu: Enhance state machine with new 'uninitialized' state
Date: Mon, 2 Jul 2018 04:21:18 -0400 (EDT) [thread overview]
Message-ID: <cbbd6eb5bc35528f72149d4688d0831901c24af1.1530519301.git.fthain@telegraphics.com.au> (raw)
In-Reply-To: <cover.1530519301.git.fthain@telegraphics.com.au>
On 68k Macs, the via/vias pointer can't be used to determine whether
the PMU driver has been initialized. For portability, add a new state
to indicate that via_find_pmu() succeeded.
After via_find_pmu() executes, testing vias == NULL is equivalent to
testing via == NULL. Replace these tests with pmu_state == uninitialized
which is simpler and more consistent. No functional change.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
drivers/macintosh/via-pmu.c | 44 ++++++++++++++++++++++----------------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index c313ddfdb17a..6a6f1666712e 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -114,6 +114,7 @@ static volatile unsigned char __iomem *via;
#define CB1_INT 0x10 /* transition on CB1 input */
static volatile enum pmu_state {
+ uninitialized = 0,
idle,
sending,
intack,
@@ -274,7 +275,7 @@ int __init find_via_pmu(void)
u64 taddr;
const u32 *reg;
- if (via)
+ if (pmu_state != uninitialized)
return 1;
vias = of_find_node_by_name(NULL, "via-pmu");
if (vias == NULL)
@@ -369,20 +370,19 @@ int __init find_via_pmu(void)
fail:
of_node_put(vias);
vias = NULL;
+ pmu_state = uninitialized;
return 0;
}
#ifdef CONFIG_ADB
static int pmu_probe(void)
{
- return vias == NULL? -ENODEV: 0;
+ return pmu_state == uninitialized ? -ENODEV : 0;
}
static int pmu_init(void)
{
- if (vias == NULL)
- return -ENODEV;
- return 0;
+ return pmu_state == uninitialized ? -ENODEV : 0;
}
#endif /* CONFIG_ADB */
@@ -397,7 +397,7 @@ static int __init via_pmu_start(void)
{
unsigned int irq;
- if (vias == NULL)
+ if (pmu_state == uninitialized)
return -ENODEV;
batt_req.complete = 1;
@@ -463,7 +463,7 @@ arch_initcall(via_pmu_start);
*/
static int __init via_pmu_dev_init(void)
{
- if (vias == NULL)
+ if (pmu_state == uninitialized)
return -ENODEV;
#ifdef CONFIG_PMAC_BACKLIGHT
@@ -929,7 +929,7 @@ static int pmu_send_request(struct adb_request *req, int sync)
{
int i, ret;
- if ((vias == NULL) || (!pmu_fully_inited)) {
+ if (pmu_state == uninitialized || !pmu_fully_inited) {
req->complete = 1;
return -ENXIO;
}
@@ -1023,7 +1023,7 @@ static int __pmu_adb_autopoll(int devs)
static int pmu_adb_autopoll(int devs)
{
- if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
+ if (pmu_state == uninitialized || !pmu_fully_inited || !pmu_has_adb)
return -ENXIO;
adb_dev_map = devs;
@@ -1036,7 +1036,7 @@ static int pmu_adb_reset_bus(void)
struct adb_request req;
int save_autopoll = adb_dev_map;
- if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
+ if (pmu_state == uninitialized || !pmu_fully_inited || !pmu_has_adb)
return -ENXIO;
/* anyone got a better idea?? */
@@ -1072,7 +1072,7 @@ pmu_request(struct adb_request *req, void (*done)(struct adb_request *),
va_list list;
int i;
- if (vias == NULL)
+ if (pmu_state == uninitialized)
return -ENXIO;
if (nbytes < 0 || nbytes > 32) {
@@ -1097,7 +1097,7 @@ pmu_queue_request(struct adb_request *req)
unsigned long flags;
int nsend;
- if (via == NULL) {
+ if (pmu_state == uninitialized) {
req->complete = 1;
return -ENXIO;
}
@@ -1210,7 +1210,7 @@ pmu_start(void)
void
pmu_poll(void)
{
- if (!via)
+ if (pmu_state == uninitialized)
return;
if (disable_poll)
return;
@@ -1220,7 +1220,7 @@ pmu_poll(void)
void
pmu_poll_adb(void)
{
- if (!via)
+ if (pmu_state == uninitialized)
return;
if (disable_poll)
return;
@@ -1235,7 +1235,7 @@ pmu_poll_adb(void)
void
pmu_wait_complete(struct adb_request *req)
{
- if (!via)
+ if (pmu_state == uninitialized)
return;
while((pmu_state != idle && pmu_state != locked) || !req->complete)
via_pmu_interrupt(0, NULL);
@@ -1251,7 +1251,7 @@ pmu_suspend(void)
{
unsigned long flags;
- if (!via)
+ if (pmu_state == uninitialized)
return;
spin_lock_irqsave(&pmu_lock, flags);
@@ -1282,7 +1282,7 @@ pmu_resume(void)
{
unsigned long flags;
- if (!via || (pmu_suspended < 1))
+ if (pmu_state == uninitialized || pmu_suspended < 1)
return;
spin_lock_irqsave(&pmu_lock, flags);
@@ -1644,7 +1644,7 @@ pmu_enable_irled(int on)
{
struct adb_request req;
- if (vias == NULL)
+ if (pmu_state == uninitialized)
return ;
if (pmu_kind == PMU_KEYLARGO_BASED)
return ;
@@ -1659,7 +1659,7 @@ pmu_restart(void)
{
struct adb_request req;
- if (via == NULL)
+ if (pmu_state == uninitialized)
return;
local_irq_disable();
@@ -1684,7 +1684,7 @@ pmu_shutdown(void)
{
struct adb_request req;
- if (via == NULL)
+ if (pmu_state == uninitialized)
return;
local_irq_disable();
@@ -1712,7 +1712,7 @@ pmu_shutdown(void)
int
pmu_present(void)
{
- return via != NULL;
+ return pmu_state != uninitialized;
}
#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
@@ -2378,7 +2378,7 @@ static struct miscdevice pmu_device = {
static int pmu_device_init(void)
{
- if (!via)
+ if (pmu_state == uninitialized)
return 0;
if (misc_register(&pmu_device) < 0)
printk(KERN_ERR "via-pmu: cannot register misc device.\n");
--
2.16.4
next prev parent reply other threads:[~2018-07-02 8:23 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-02 8:21 [PATCH v4 00/11] macintosh: Resolve various PMU driver problems Finn Thain
2018-07-02 8:21 ` [PATCH v4 01/11] macintosh/via-pmu: Fix section mismatch warning Finn Thain
2018-07-02 10:35 ` Mathieu Malaterre
2018-07-02 12:07 ` Finn Thain
2018-08-01 5:23 ` [v4,01/11] " Michael Ellerman
2018-07-02 8:21 ` [PATCH v4 05/11] macintosh/via-pmu: Replace via pointer with via1 and via2 pointers Finn Thain
2018-07-02 8:21 ` [PATCH v4 02/11] macintosh/via-pmu: Add missing mmio accessors Finn Thain
2018-07-02 8:21 ` [PATCH v4 03/11] macintosh/via-pmu: Don't clear shift register interrupt flag twice Finn Thain
2018-07-02 8:21 ` Finn Thain [this message]
2018-07-02 8:21 ` [PATCH v4 08/11] macintosh/via-pmu68k: Don't load driver on unsupported hardware Finn Thain
2018-07-30 7:23 ` Geert Uytterhoeven
2018-07-02 8:21 ` [PATCH v4 09/11] macintosh/via-pmu: Replace via-pmu68k driver with via-pmu driver Finn Thain
2018-07-30 6:47 ` Michael Ellerman
2018-07-30 7:27 ` Geert Uytterhoeven
2018-07-30 13:32 ` Michael Ellerman
2018-07-30 7:26 ` Geert Uytterhoeven
2018-07-30 7:27 ` Geert Uytterhoeven
2018-07-02 8:21 ` [PATCH v4 06/11] macintosh/via-pmu: Add support for m68k PowerBooks Finn Thain
2018-07-02 8:21 ` [PATCH v4 11/11] macintosh/via-pmu: Disambiguate interrupt statistics Finn Thain
2018-07-02 8:21 ` [PATCH v4 10/11] macintosh/via-pmu: Clean up " Finn Thain
2018-07-02 8:21 ` [PATCH v4 07/11] macintosh/via-pmu: Explicitly specify CONFIG_PPC_PMAC dependencies Finn Thain
2018-07-28 7:08 ` [PATCH v4 00/11] macintosh: Resolve various PMU driver problems Michael Schmitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cbbd6eb5bc35528f72149d4688d0831901c24af1.1530519301.git.fthain@telegraphics.com.au \
--to=fthain@telegraphics.com.au \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®