mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Tien ChenLi" <cltien@gmail.com>
To: "Willy Tarreau" <w@1wt.eu>
Cc: linux-kernel@vger.kernel.org, "David Miller" <davem@davemloft.net>
Subject: Re: [PATCH]pktgen oops when used with balance-tlb bonding
Date: Mon, 7 Aug 2006 15:04:34 -0400	[thread overview]
Message-ID: <cc862f80608071204y5b7b55a9n618dde95eb0c5b4@mail.gmail.com> (raw)
In-Reply-To: <20060802203854.GA462@1wt.eu>

[-- Attachment #1: Type: text/plain, Size: 2437 bytes --]

Indeed the skb->mac.raw is already set just several lines up. Now only
two lines are needed:

Signed-off-by: Chen-Li Tien <cltien@gmail.com>

--- linux-2.6.17.6/net/core/pktgen.c.orig       2006-07-15
15:00:43.000000000 -0400
+++ linux-2.6.17.6/net/core/pktgen.c    2006-08-07 14:50:09.000000000 -0400
@@ -2149,6 +2149,8 @@ static struct sk_buff *fill_packet_ipv4(
        skb->mac.raw = ((u8 *) iph) - 14 - pkt_dev->nr_labels*sizeof(u32);
        skb->dev = odev;
        skb->pkt_type = PACKET_HOST;
+       skb->nh.iph = iph;
+       skb->h.uh = udph;

        if (pkt_dev->nfrags <= 0)
                pgh = (struct pktgen_hdr *)skb_put(skb, datalen);

Since google mail extand tab into spaces and I cannot change them back
to tab, I attached the patch file itself so please use it instead.

Sincerely,
Chen-Li Tien

On 02/08/06, Willy Tarreau <w@1wt.eu> wrote:
> On Sat, Jul 22, 2006 at 07:11:21PM -0400, Tien ChenLi wrote:
> > I fixed a bug in pktgen so it won't cause oops when used with
> > balance-tlb or balance-alb bonding driver:
> >
> > --- linux-2.6.17.4/net/core/pktgen.c.orig       2006-07-06
> > 16:02:28.000000000 -0
> > 400
> > +++ linux-2.6.17.4/net/core/pktgen.c    2006-07-10 16:40:47.000000000 -0400
> > @@ -2149,6 +2149,9 @@
> >        skb->mac.raw = ((u8 *) iph) - 14 - pkt_dev->nr_labels*sizeof(u32);
> >        skb->dev = odev;
> >        skb->pkt_type = PACKET_HOST;
> > +       skb->mac.raw = eth;
>           ^^^^^^^^^^^^
> Are you sure about this ? I don't understand why you change skb->mac.raw
> here while it's still assigned 3 lines above. Either of those is unneeded
> and/or erroneous.
>
> > +       skb->nh.iph = iph;
> > +       skb->h.uh = udph;
> >
> >        if (pkt_dev->nfrags <= 0)
> >                pgh = (struct pktgen_hdr *)skb_put(skb, datalen);
> >
> > The root cause is that the bond_alb_xmit in bonding will peek the
> > destination address in packet via the skb->nh.iph pointer, generally
> > this will be filled by upper layer network driver, but the packet
> > generated by pktgen will be sent to device driver so it will need to
> > set this pointer correctly. The other two pointers are not necessary
> > for now, they are set to avoid similar problem.
>
> Fine. Please confirm your intention about mac.raw above, and as David
> said, please sign-off the patch and check your mailer for unexpected
> tabs/spaces conversions.
>
> > Chen-Li Tien
>
> Thanks in advance,
> Willy
>
>

[-- Attachment #2: pktgen.c.patch --]
[-- Type: text/x-patch, Size: 457 bytes --]

--- linux-2.6.17.6/net/core/pktgen.c.orig	2006-07-15 15:00:43.000000000 -0400
+++ linux-2.6.17.6/net/core/pktgen.c	2006-08-07 14:50:09.000000000 -0400
@@ -2149,6 +2149,8 @@ static struct sk_buff *fill_packet_ipv4(
 	skb->mac.raw = ((u8 *) iph) - 14 - pkt_dev->nr_labels*sizeof(u32);
 	skb->dev = odev;
 	skb->pkt_type = PACKET_HOST;
+	skb->nh.iph = iph;
+	skb->h.uh = udph;
 
 	if (pkt_dev->nfrags <= 0)
 		pgh = (struct pktgen_hdr *)skb_put(skb, datalen);

  reply	other threads:[~2006-08-07 19:04 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-07-22 23:11 Tien ChenLi
2006-07-24  6:35 ` David Miller
2006-08-02 20:38 ` Willy Tarreau
2006-08-07 19:04   ` Tien ChenLi [this message]
2006-08-07 19:07     ` Tien ChenLi
2006-08-08  3:51       ` David Miller
2006-08-08  3:49     ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cc862f80608071204y5b7b55a9n618dde95eb0c5b4@mail.gmail.com \
    --to=cltien@gmail.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=w@1wt.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®