mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andy Lutomirski <luto@kernel.org>
To: X86 ML <x86@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Andy Lutomirski <luto@kernel.org>
Subject: [PATCH 2/4] x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code
Date: Sun, 17 Sep 2017 09:03:49 -0700	[thread overview]
Message-ID: <cdc14bbe5d3c3ef2a562be09a6368ffe9bd947a6.1505663533.git.luto@kernel.org> (raw)
In-Reply-To: <cover.1505663533.git.luto@kernel.org>
In-Reply-To: <cover.1505663533.git.luto@kernel.org>

Putting the logical ASID into CR3's PCID bits directly means that we
have two cases to consider separately: ASID == 0 and ASID != 0.
This means that bugs that only hit in one of these cases trigger
nondeterministically.

There were some bugs like this in the past, and I think there's
still one in current kernels.  In particular, we have a number of
ASID-unware code paths that save CR3, write some special value, and
then restore CR3.  This includes suspend/resume, hibernate, kexec,
EFI, and maybe other things I've missed.  This is currently
dangerous: if ASID != 0, then this code sequence will leave garbage
in the TLB tagged for ASID 0.  We could potentially see corruption
when switching back to ASID 0.  In principle, an
initialize_tlbstate_and_flush() call after these sequences would
solve the problem, but EFI, at least, does not call this.  (And it
probably shouldn't -- initialize_tlbstate_and_flush() is rather
expensive.)

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/include/asm/mmu_context.h | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index a999ba6b721f..9001f7a52216 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -286,14 +286,31 @@ static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
 	return __pkru_allows_pkey(vma_pkey(vma), write);
 }
 
+/*
+ * If PCID is on, ASID-aware code paths put the ASID + 1 into the PCID
+ * bits.  This serves two purposes.  It prevents a nasty situation in
+ * which PCID-unaware code saves CR3, loads some other value (with PCID
+ * == 0), and then restores CR3, thus corrupting the TLB for ASID 0 if
+ * the saved ASID was nonzero.  It also means that any bugs involving
+ * loading a PCID-enabled CR3 with CR4.PCIDE off will trigger
+ * deterministically.
+ */
+
 static inline unsigned long build_cr3(struct mm_struct *mm, u16 asid)
 {
-	return __sme_pa(mm->pgd) | asid;
+	if (static_cpu_has(X86_FEATURE_PCID)) {
+		VM_WARN_ON_ONCE(asid > 4094);
+		return __sme_pa(mm->pgd) | (asid + 1);
+	} else {
+		VM_WARN_ON_ONCE(asid != 0);
+		return __sme_pa(mm->pgd);
+	}
 }
 
 static inline unsigned long build_cr3_noflush(struct mm_struct *mm, u16 asid)
 {
-	return __sme_pa(mm->pgd) | asid | CR3_NOFLUSH;
+	VM_WARN_ON_ONCE(asid > 4094);
+	return __sme_pa(mm->pgd) | (asid + 1) | CR3_NOFLUSH;
 }
 
 /*
-- 
2.13.5

  parent reply	other threads:[~2017-09-17 16:03 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-17 16:03 [PATCH 0/4] More PCID fixes Andy Lutomirski
2017-09-17 16:03 ` [PATCH 1/4] x86/mm: Factor out CR3-building code Andy Lutomirski
2017-09-17 18:18   ` [tip:x86/urgent] " tip-bot for Andy Lutomirski
2017-09-17 16:03 ` Andy Lutomirski [this message]
2017-09-17 18:19   ` [tip:x86/urgent] x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code tip-bot for Andy Lutomirski
2017-09-17 16:03 ` [PATCH 3/4] x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier Andy Lutomirski
2017-09-17 18:19   ` [tip:x86/urgent] " tip-bot for Andy Lutomirski
2017-09-17 16:03 ` [PATCH 4/4] x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUs Andy Lutomirski
2017-09-17 18:19   ` [tip:x86/urgent] " tip-bot for Andy Lutomirski
2017-09-18  8:17     ` Paul Menzel
2017-09-20 12:52     ` Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cdc14bbe5d3c3ef2a562be09a6368ffe9bd947a6.1505663533.git.luto@kernel.org \
    --to=luto@kernel.org \
    --cc=bpetkov@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®