From: Wenmeng Liu <quic_wenmliu@qualcomm.com>
To: Wenmeng Liu <quic_wenmliu@quicinc.com>,
Robert Foss <rfoss@kernel.org>, Todor Tomov <todor.too@gmail.com>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-media@vger.kernel.org>,
<linux-arm-msm@vger.kernel.org>
Subject: Re: [PATCH v3 0/3] media: qcom: camss: Add sa8775p camss TPG support
Date: Wed, 17 Sep 2025 18:16:57 +0800 [thread overview]
Message-ID: <cdcc53e9-c616-405c-85c7-f65e83bd4918@qualcomm.com> (raw)
In-Reply-To: <20250822-camss_tpg-v3-0-c7833a5f10d0@quicinc.com>
On 8/22/2025 8:09 PM, Wenmeng Liu wrote:
> SA8775P is a Qualcomm SoC. This series adds driver changes to
> bring up the TPG interfaces in SA8775P.
>
> We have tested this on qcs9100-ride board with 'Test Pattern Generator'.
> Unlike CSID TPG, this TPG can be seen as a combination of CSIPHY and sensor.
>
> Tested with following commands:
> - media-ctl --reset
> - media-ctl -V '"msm_tpg0":0[fmt:SRGGB10/4608x2592 field:none]'
> - media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4608x2592 field:none]'
> - media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4608x2592 field:none]'
> - media-ctl -l '"msm_tpg0":1->"msm_csid0":0[1]'
> - media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
> - v4l2-ctl -d /dev/v4l-subdev4 -c test_pattern=9
> - yavta -B capture-mplane -n 5 -f SRGGB10P -s 4608x2592 /dev/video0
> --capture=7
>
> Dependencies:
> https://lore.kernel.org/all/20250814101615.1102795-10-quic_vikramsa@quicinc.com/
> https://lore.kernel.org/all/20250813053724.232494-1-quic_vikramsa@quicinc.com/
>
> changes in v3:
> - Change the payload mode string
> - Change the method for setting the TPG clock rate
> - Remove the TPG IRQ
> - Format correction
> - Remove unused variables
> - Merge functions and eliminate redundancy
> - Modify the register write method
> - Change TPG matching method to use grp_id
> - Encapsulate magic numbers as macros
> - Link to v2: https://lore.kernel.org/all/20250717-lemans_tpg-v2-0-a2538659349c@quicinc.com/
>
> Changes in v2:
> - rebase tpg changes based on new versions of sa8775p and qcs8300 camss patches
> - Link to v1: https://lore.kernel.org/all/20250211-sa8775p_tpg-v1-0-3f76c5f8431f@quicinc.com/
>
> ---
> Wenmeng Liu (3):
> media: qcom: camss: Add support for TPG common
> media: qcom: camss: Add link support for TPG common
> media: qcom: camss: tpg: Add TPG support for SA8775P and QCS8300
>
> drivers/media/platform/qcom/camss/Makefile | 2 +
> .../media/platform/qcom/camss/camss-csid-gen3.c | 17 +
> drivers/media/platform/qcom/camss/camss-csid.c | 43 +-
> drivers/media/platform/qcom/camss/camss-csiphy.c | 1 +
> drivers/media/platform/qcom/camss/camss-csiphy.h | 2 +
> drivers/media/platform/qcom/camss/camss-tpg-gen1.c | 219 +++++++
> drivers/media/platform/qcom/camss/camss-tpg.c | 696 +++++++++++++++++++++
> drivers/media/platform/qcom/camss/camss-tpg.h | 125 ++++
> drivers/media/platform/qcom/camss/camss.c | 130 ++++
> drivers/media/platform/qcom/camss/camss.h | 5 +
> 10 files changed, 1226 insertions(+), 14 deletions(-)
> ---
> base-commit: 6afac82056e38e02266cd30f458b25a1f9017508
> change-id: 20250822-camss_tpg-718db678d984
>
> Best regards,
Gently reminder to Bryan.
Thanks,
Wenmeng
prev parent reply other threads:[~2025-09-17 10:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-22 12:09 Wenmeng Liu
2025-08-22 12:09 ` [PATCH v3 1/3] media: qcom: camss: Add support for TPG common Wenmeng Liu
2025-08-22 12:09 ` [PATCH v3 2/3] media: qcom: camss: Add link " Wenmeng Liu
2025-08-22 12:09 ` [PATCH v3 3/3] media: qcom: camss: tpg: Add TPG support for SA8775P and QCS8300 Wenmeng Liu
2025-09-03 12:16 ` Konrad Dybcio
2025-09-05 7:09 ` Wenmeng Liu
2025-09-17 10:16 ` Wenmeng Liu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cdcc53e9-c616-405c-85c7-f65e83bd4918@qualcomm.com \
--to=quic_wenmliu@qualcomm.com \
--cc=bryan.odonoghue@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=quic_wenmliu@quicinc.com \
--cc=rfoss@kernel.org \
--cc=todor.too@gmail.com \
--cc=vladimir.zapolskiy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®