Re: [PATCH v3 2/3] PCI: dwc: Add helper to Program T_POWER_ON

[Shawn Lin <shawn.lin@rock-chips.com>]

在 2026/03/11 星期三 20:40, Krishna Chaitanya Chundru 写道:
> The T_POWER_ON indicates the time (in μs) that a Port requires the port
> on the opposite side of Link to wait in L1.2.Exit after sampling CLKREQ#
> asserted before actively driving the interface. This value is used by
> the ASPM driver to compute the LTR_L1.2_THRESHOLD.
> 
> Currently, some controllers exposes T_POWER_ON value of zero in the L1SS
> capability registers, leading to incorrect LTR_L1.2_THRESHOLD calculations,
> which can result in improper L1.2 exit behavior and if AER happens to be
> supported and enabled, the error may be *reported* via AER.
> 
> Add a helper to override T_POWER_ON value by the DWC controller drivers.
> 

Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>

> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
> ---
>   drivers/pci/controller/dwc/pcie-designware.c | 28 ++++++++++++++++++++++++++++
>   drivers/pci/controller/dwc/pcie-designware.h |  1 +
>   2 files changed, 29 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index 5741c09dde7f40487c6da6dfd66f7c8d96a74259..6289329ef2b2a4ac9264d1c6cb5ea4e88c261634 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -1249,6 +1249,34 @@ void dw_pcie_hide_unsupported_l1ss(struct dw_pcie *pci)
>   	dw_pcie_writel_dbi(pci, l1ss + PCI_L1SS_CAP, l1ss_cap);
>   }
>   
> +/* TODO: Need to handle multi root ports */
> +void dw_pcie_program_t_power_on(struct dw_pcie *pci, u16 t_power_on)
> +{
> +	u8 scale, value;
> +	u16 offset;
> +	u32 val;
> +
> +	if (!t_power_on)
> +		return;
> +
> +	offset = dw_pcie_find_ext_capability(pci, PCI_EXT_CAP_ID_L1SS);
> +	if (!offset)
> +		return;
> +
> +	pcie_encode_t_power_on(t_power_on, &scale, &value);
> +
> +	dw_pcie_dbi_ro_wr_en(pci);
> +
> +	val = readl(pci->dbi_base + offset + PCI_L1SS_CAP);
> +	val &= ~(PCI_L1SS_CAP_P_PWR_ON_SCALE | PCI_L1SS_CAP_P_PWR_ON_VALUE);
> +	FIELD_MODIFY(PCI_L1SS_CAP_P_PWR_ON_SCALE, &val, scale);
> +	FIELD_MODIFY(PCI_L1SS_CAP_P_PWR_ON_VALUE, &val, value);
> +
> +	writel(val, pci->dbi_base + offset + PCI_L1SS_CAP);
> +
> +	dw_pcie_dbi_ro_wr_dis(pci);
> +}
> +
>   void dw_pcie_setup(struct dw_pcie *pci)
>   {
>   	u32 val;
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index ae6389dd9caa5c27690f998d58729130ea863984..da67beece3f11e33d9a1937fa23d443feea3bbc7 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -602,6 +602,7 @@ int dw_pcie_prog_ep_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
>   				u8 bar, size_t size);
>   void dw_pcie_disable_atu(struct dw_pcie *pci, u32 dir, int index);
>   void dw_pcie_hide_unsupported_l1ss(struct dw_pcie *pci);
> +void dw_pcie_program_t_power_on(struct dw_pcie *pci, u16 t_power_on);
>   void dw_pcie_setup(struct dw_pcie *pci);
>   void dw_pcie_iatu_detect(struct dw_pcie *pci);
>   int dw_pcie_edma_detect(struct dw_pcie *pci);
>