From: Primoz Fiser <primoz.fiser@norik.com>
To: Frank Li <Frank.li@oss.nxp.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, upstream@lists.phytec.de
Subject: Re: [PATCH v2 0/3] ARM: dts: imx6: phycore-som: PMIC and PHY fixes
Date: Fri, 2 Oct 2026 08:32:14 +0200 [thread overview]
Message-ID: <ce32d95f-8a78-486c-966a-2ea0a686bcd6@norik.com> (raw)
In-Reply-To: <ar5y_StTTBYDeck3@SMW015318>
Hi Frank,
On 10/1/26 16:49, Frank Li wrote:
> On Thu, Oct 01, 2026 at 09:09:44AM +0200, Primoz Fiser wrote:
>> A few small fixes for the PHYTEC phyCORE-i.MX6 SOM:
>>
>> - Pin the DA9062 PMIC watchdog to /dev/watchdog0 (1/4).
>> - Raise the PMIC's SOC/ARM buck ceiling to 1.5V, needed once the
>> 1.2GHz OPP tier ([1]] requests 1.3V for VDD_ARM and the anatop
>> LDO's 125mV dropout is added on top (2/4).
>> - Add phy-reset-duration to fec node for more robust reset pulse (3/4)
>>
>> [1] https://lore.kernel.org/all/20260923070505.494949-1-primoz.fiser@norik.com/
>>
>> Link to v1: https://lore.kernel.org/all/20260930102532.2262700-1-primoz.fiser@norik.com/
>>
>> Changes in v2:
>> - Drop patch #3 from v1 (converting to reset-gpios) due to potential
>> backwards compatibility as suggested by Frank
>> - Convert patch #4 from v1 to patch #3 in v2 (use phy-reset-duration)
>
> What branch do you work on? I can't apply.
This series depends on series [1] patch #4.
BR,
Primoz
[1]
https://lore.kernel.org/all/20260924065044.368341-1-primoz.fiser@norik.com/
>
> Frank
>
>>
>> Primoz Fiser (3):
>> ARM: dts: imx6: phycore-som: Set PMIC watchdog alias as default
>> ARM: dts: imx6: phycore-som: Increase PMIC max SOC and ARM voltage
>> ARM: dts: imx6: phycore-som: Add phy-reset-duration
>>
>> arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi | 8 +++++---
>> 1 file changed, 5 insertions(+), 3 deletions(-)
>>
>> --
>> 2.34.1
>>
>>
--
Primoz Fiser
phone: +386-41-390-545
email: primoz.fiser@norik.com
--
Norik systems d.o.o.
Your embedded software partner
Slovenia, EU
phone: +386-41-540-545
email: info@norik.com
prev parent reply other threads:[~2026-10-02 6:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-01 7:09 Primoz Fiser
2026-10-01 7:09 ` [PATCH v2 1/3] ARM: dts: imx6: phycore-som: Set PMIC watchdog alias as default Primoz Fiser
2026-10-01 7:09 ` [PATCH v2 2/3] ARM: dts: imx6: phycore-som: Increase PMIC max SOC and ARM voltage Primoz Fiser
2026-10-01 7:09 ` [PATCH v2 3/3] ARM: dts: imx6: phycore-som: Add phy-reset-duration Primoz Fiser
2026-10-01 14:49 ` [PATCH v2 0/3] ARM: dts: imx6: phycore-som: PMIC and PHY fixes Frank Li
2026-10-02 6:32 ` Primoz Fiser [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ce32d95f-8a78-486c-966a-2ea0a686bcd6@norik.com \
--to=primoz.fiser@norik.com \
--cc=Frank.Li@nxp.com \
--cc=Frank.li@oss.nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=upstream@lists.phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®