From: "Clément Léger" <cleger@rivosinc.com>
To: Alexandre Ghiti <alex@ghiti.fr>,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>
Subject: Re: [PATCH 2/2] riscv: uaccess: do not do misaligned accesses in get/put_user()
Date: Mon, 2 Jun 2025 09:37:08 +0200 [thread overview]
Message-ID: <cea8cdf2-4b1e-4628-a5df-249adf4387b5@rivosinc.com> (raw)
In-Reply-To: <718fb1d7-9f0c-4637-abe8-5a34305c3ae2@ghiti.fr>
On 31/05/2025 14:35, Alexandre Ghiti wrote:
> On 5/30/25 22:56, Clément Léger wrote:
>> Doing misaligned access to userspace memory would make a trap on
>> platform where it is emulated. Latest fixes removed the kernel
>> capability to do unaligned accesses to userspace memory safely since
>> interrupts are kept disabled at all time during that. Thus doing so
>> would crash the kernel.
>>
>> Such behavior was detected with GET_UNALIGN_CTL() that was doing
>> a put_user() with an unsigned long* address that should have been an
>> unsigned int*. Reenabling kernel misaligned access emulation is a bit
>> risky and it would also degrade performances. Rather than doing that,
>> we will try to avoid any misaligned accessed by using copy_from/to_user()
>> which does not do any misaligned accesses. This can be done only for
>> !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS and thus allows to only generate
>> a bit more code for this config.
>>
>> Signed-off-by: Clément Léger <cleger@rivosinc.com>
>> ---
>> arch/riscv/include/asm/uaccess.h | 28 ++++++++++++++++++++++------
>> 1 file changed, 22 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/riscv/include/asm/uaccess.h b/arch/riscv/include/
>> asm/uaccess.h
>> index 046de7ced09c..b542c05f394f 100644
>> --- a/arch/riscv/include/asm/uaccess.h
>> +++ b/arch/riscv/include/asm/uaccess.h
>> @@ -169,8 +169,21 @@ do { \
>> #endif /* CONFIG_64BIT */
>> +unsigned long __must_check __asm_copy_to_user(void __user *to,
>> + const void *from, unsigned long n);
>> +unsigned long __must_check __asm_copy_from_user(void *to,
>> + const void __user *from, unsigned long n);
>> +
>> #define __get_user_nocheck(x, __gu_ptr, label) \
>> do { \
>> + if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS))
>> { \
>> + if (!IS_ALIGNED((uintptr_t)__gu_ptr, sizeof(*__gu_ptr)))
>> { \
>
>
> Nit: I would use && instead of 2 ifs.
>
>
>> + if (__asm_copy_from_user(&(x), __gu_ptr,
>> sizeof(*__gu_ptr))) \
>> + goto label; \
>> + else \
>> + break; \
>
>
> Here I would remove the else
Hi Alex,
The "else" is needed to break from the outer do/while loop or it will go
though the next switch case (and it will crash due to misaligned accesses).
>
>
>> + } \
>> + } \
>> switch (sizeof(*__gu_ptr)) { \
>> case 1: \
>> __get_user_asm("lb", (x), __gu_ptr, label); \
>> @@ -297,6 +310,15 @@ do { \
>> #define __put_user_nocheck(x, __gu_ptr, label) \
>> do { \
>> + if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS))
>> { \
>> + if (!IS_ALIGNED((uintptr_t)__gu_ptr, sizeof(*__gu_ptr)))
>> { \
>> + unsigned long val = (unsigned long)(x); \
>
>
> Here it sems like __inttype(*(__gu_ptr)) is more accurate than unsigned
> long, even though I think unsigned long works fine too.
Wasn't aware of __inttype, but it sounds good.
Thanks,
Clément
>
>
>> + if (__asm_copy_to_user(__gu_ptr, &(val),
>> sizeof(*__gu_ptr))) \
>> + goto label; \
>> + else \
>> + break; \
>> + } \
>> + } \
>> switch (sizeof(*__gu_ptr)) { \
>> case 1: \
>> __put_user_asm("sb", (x), __gu_ptr, label); \
>> @@ -385,12 +407,6 @@ err_label: \
>> -EFAULT; \
>> })
>> -
>> -unsigned long __must_check __asm_copy_to_user(void __user *to,
>> - const void *from, unsigned long n);
>> -unsigned long __must_check __asm_copy_from_user(void *to,
>> - const void __user *from, unsigned long n);
>> -
>> static inline unsigned long
>> raw_copy_from_user(void *to, const void __user *from, unsigned long n)
>> {
next prev parent reply other threads:[~2025-06-02 7:37 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-30 20:56 [PATCH 0/2] riscv: misaligned: fix misaligned accesses handling in put/get_user() Clément Léger
2025-05-30 20:56 ` [PATCH 1/2] riscv: process: use unsigned int instead of unsigned long for put_user() Clément Léger
2025-05-31 12:29 ` Alexandre Ghiti
2025-05-30 20:56 ` [PATCH 2/2] riscv: uaccess: do not do misaligned accesses in get/put_user() Clément Léger
2025-05-31 12:35 ` Alexandre Ghiti
2025-06-02 7:37 ` Clément Léger [this message]
2025-06-02 15:22 ` Alexandre Ghiti
2025-05-31 18:28 ` David Laight
2025-06-01 17:35 ` Maciej W. Rozycki
2025-06-02 7:35 ` Clément Léger
2025-06-02 7:34 ` Clément Léger
2025-05-31 13:32 ` [PATCH 0/2] riscv: misaligned: fix misaligned accesses handling in put/get_user() Alexandre Ghiti
2025-06-02 7:19 ` Clément Léger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cea8cdf2-4b1e-4628-a5df-249adf4387b5@rivosinc.com \
--to=cleger@rivosinc.com \
--cc=alex@ghiti.fr \
--cc=aou@eecs.berkeley.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®