mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* k10temp show over 100 degrees temperature on EPYC Milan servers from DELL and SMC
@ 2023-04-19  9:54 Jinpu Wang
  2023-04-19 13:33 ` Limonciello, Mario
  0 siblings, 1 reply; 4+ messages in thread
From: Jinpu Wang @ 2023-04-19  9:54 UTC (permalink / raw)
  To: linux-hwmon, clemens, Guenter Roeck, mario.limonciello, babu.moger
  Cc: open list

Dear experts on the list,

We've noticed many of our EPYC Milan servers from different vendors
(DELL  and SMC) show 100 degrees, eg

sudo sensors
k10temp-pci-00c3
Adapter: PCI adapter
Tctl:        +117.5°C
Tdie:        +117.5°C
Tccd1:        +67.0°C
Tccd2:        +65.2°C
Tccd3:        +63.2°C
Tccd4:        +63.8°C
Tccd5:        +67.2°C
Tccd6:        +63.5°C
Tccd7:        +64.2°C
Tccd8:        +64.8°C

 sudo lscpu
Architecture:                    x86_64
CPU op-mode(s):                  32-bit, 64-bit
Byte Order:                      Little Endian
Address sizes:                   48 bits physical, 48 bits virtual
CPU(s):                          128
On-line CPU(s) list:             0-127
Thread(s) per core:              2
Core(s) per socket:              64
Socket(s):                       1
NUMA node(s):                    1
Vendor ID:                       AuthenticAMD
CPU family:                      25
Model:                           1
Model name:                      AMD EPYC 7713P 64-Core Processor
Stepping:                        1
Frequency boost:                 enabled
CPU MHz:                         2479.705
CPU max MHz:                     3720,7029
CPU min MHz:                     1500,0000
BogoMIPS:                        3992.43
Virtualization:                  AMD-V
L1d cache:                       2 MiB
L1i cache:                       2 MiB
L2 cache:                        32 MiB
L3 cache:                        256 MiB
NUMA node0 CPU(s):               0-127

We've seen such high temperatures even on  idle servers.

We are running LTS kernel 5.10.136, but checking the git history for
k10temp driver, I don't find any missing fix.
My questions are:
1. Is it normal to have such high temperatures for tctl?  can we trust
the value?
2  Do we need to worry about such high temperatures?

Thx!
Jinpu Wang @ IONOS Cloud.

^ permalink raw reply	[flat|nested] 4+ messages in thread

* RE: k10temp show over 100 degrees temperature on EPYC Milan servers from DELL and SMC
  2023-04-19  9:54 k10temp show over 100 degrees temperature on EPYC Milan servers from DELL and SMC Jinpu Wang
@ 2023-04-19 13:33 ` Limonciello, Mario
  2023-04-19 14:07   ` Guenter Roeck
  2023-04-20  5:32   ` Jinpu Wang
  0 siblings, 2 replies; 4+ messages in thread
From: Limonciello, Mario @ 2023-04-19 13:33 UTC (permalink / raw)
  To: Jinpu Wang, linux-hwmon, clemens, Guenter Roeck; +Cc: open list

[Public]

Hi,

> Dear experts on the list,
> 
> We've noticed many of our EPYC Milan servers from different vendors
> (DELL  and SMC) show 100 degrees, eg
> 
> sudo sensors
> k10temp-pci-00c3
> Adapter: PCI adapter
> Tctl:        +117.5°C
> Tdie:        +117.5°C
> Tccd1:        +67.0°C
> Tccd2:        +65.2°C
> Tccd3:        +63.2°C
> Tccd4:        +63.8°C
> Tccd5:        +67.2°C
> Tccd6:        +63.5°C
> Tccd7:        +64.2°C
> Tccd8:        +64.8°C
> 
>  sudo lscpu
> Architecture:                    x86_64
> CPU op-mode(s):                  32-bit, 64-bit
> Byte Order:                      Little Endian
> Address sizes:                   48 bits physical, 48 bits virtual
> CPU(s):                          128
> On-line CPU(s) list:             0-127
> Thread(s) per core:              2
> Core(s) per socket:              64
> Socket(s):                       1
> NUMA node(s):                    1
> Vendor ID:                       AuthenticAMD
> CPU family:                      25
> Model:                           1
> Model name:                      AMD EPYC 7713P 64-Core Processor
> Stepping:                        1
> Frequency boost:                 enabled
> CPU MHz:                         2479.705
> CPU max MHz:                     3720,7029
> CPU min MHz:                     1500,0000
> BogoMIPS:                        3992.43
> Virtualization:                  AMD-V
> L1d cache:                       2 MiB
> L1i cache:                       2 MiB
> L2 cache:                        32 MiB
> L3 cache:                        256 MiB
> NUMA node0 CPU(s):               0-127
> 
> We've seen such high temperatures even on  idle servers.
> 
> We are running LTS kernel 5.10.136, but checking the git history for
> k10temp driver, I don't find any missing fix.
> My questions are:
> 1. Is it normal to have such high temperatures for tctl?  can we trust
> the value?
> 2  Do we need to worry about such high temperatures?
> 
> Thx!
> Jinpu Wang @ IONOS Cloud.

It's fixed by this patch that will be going into 6.4.
https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git/commit/?h=hwmon-next&id=1dc8e097967b69a56531c9ccb70b854771310e85

Guenter,

If you didn't already send your 6.4 PR, can you please add
Cc: stable@vger.kernel.org to the patch in your tree?

Thanks,

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: k10temp show over 100 degrees temperature on EPYC Milan servers from DELL and SMC
  2023-04-19 13:33 ` Limonciello, Mario
@ 2023-04-19 14:07   ` Guenter Roeck
  2023-04-20  5:32   ` Jinpu Wang
  1 sibling, 0 replies; 4+ messages in thread
From: Guenter Roeck @ 2023-04-19 14:07 UTC (permalink / raw)
  To: Limonciello, Mario, Jinpu Wang, linux-hwmon, clemens; +Cc: open list

On 4/19/23 06:33, Limonciello, Mario wrote:
> [Public]
> 
> Hi,
> 
[ ... ]

> 
> It's fixed by this patch that will be going into 6.4.
> https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git/commit/?h=hwmon-next&id=1dc8e097967b69a56531c9ccb70b854771310e85
> 
> Guenter,
> 
> If you didn't already send your 6.4 PR, can you please add
> Cc: stable@vger.kernel.org to the patch in your tree?
> 

I already added a Fixes: tag but, sure, adding Cc: stable@
make sense. Will do.

Thanks,
Guenter


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: k10temp show over 100 degrees temperature on EPYC Milan servers from DELL and SMC
  2023-04-19 13:33 ` Limonciello, Mario
  2023-04-19 14:07   ` Guenter Roeck
@ 2023-04-20  5:32   ` Jinpu Wang
  1 sibling, 0 replies; 4+ messages in thread
From: Jinpu Wang @ 2023-04-20  5:32 UTC (permalink / raw)
  To: Limonciello, Mario; +Cc: linux-hwmon, clemens, Guenter Roeck, open list

On Wed, Apr 19, 2023 at 3:33 PM Limonciello, Mario
<Mario.Limonciello@amd.com> wrote:
>
> [Public]
>
> Hi,
>
> > Dear experts on the list,
> >
> > We've noticed many of our EPYC Milan servers from different vendors
> > (DELL  and SMC) show 100 degrees, eg
> >
> > sudo sensors
> > k10temp-pci-00c3
> > Adapter: PCI adapter
> > Tctl:        +117.5°C
> > Tdie:        +117.5°C
> > Tccd1:        +67.0°C
> > Tccd2:        +65.2°C
> > Tccd3:        +63.2°C
> > Tccd4:        +63.8°C
> > Tccd5:        +67.2°C
> > Tccd6:        +63.5°C
> > Tccd7:        +64.2°C
> > Tccd8:        +64.8°C
> >
> >  sudo lscpu
> > Architecture:                    x86_64
> > CPU op-mode(s):                  32-bit, 64-bit
> > Byte Order:                      Little Endian
> > Address sizes:                   48 bits physical, 48 bits virtual
> > CPU(s):                          128
> > On-line CPU(s) list:             0-127
> > Thread(s) per core:              2
> > Core(s) per socket:              64
> > Socket(s):                       1
> > NUMA node(s):                    1
> > Vendor ID:                       AuthenticAMD
> > CPU family:                      25
> > Model:                           1
> > Model name:                      AMD EPYC 7713P 64-Core Processor
> > Stepping:                        1
> > Frequency boost:                 enabled
> > CPU MHz:                         2479.705
> > CPU max MHz:                     3720,7029
> > CPU min MHz:                     1500,0000
> > BogoMIPS:                        3992.43
> > Virtualization:                  AMD-V
> > L1d cache:                       2 MiB
> > L1i cache:                       2 MiB
> > L2 cache:                        32 MiB
> > L3 cache:                        256 MiB
> > NUMA node0 CPU(s):               0-127
> >
> > We've seen such high temperatures even on  idle servers.
> >
> > We are running LTS kernel 5.10.136, but checking the git history for
> > k10temp driver, I don't find any missing fix.
> > My questions are:
> > 1. Is it normal to have such high temperatures for tctl?  can we trust
> > the value?
> > 2  Do we need to worry about such high temperatures?
> >
> > Thx!
> > Jinpu Wang @ IONOS Cloud.
>
> It's fixed by this patch that will be going into 6.4.
> https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git/commit/?h=hwmon-next&id=1dc8e097967b69a56531c9ccb70b854771310e85

Hi,

I tested on affected server, the tctl output looks normal now.

Thx for quick reply.
>
> Guenter,
>
> If you didn't already send your 6.4 PR, can you please add
> Cc: stable@vger.kernel.org to the patch in your tree?
>
> Thanks,

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2023-04-20  5:33 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-04-19  9:54 k10temp show over 100 degrees temperature on EPYC Milan servers from DELL and SMC Jinpu Wang
2023-04-19 13:33 ` Limonciello, Mario
2023-04-19 14:07   ` Guenter Roeck
2023-04-20  5:32   ` Jinpu Wang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®