[PATCH 0/2] drm/panel-simple: Add panel parameters for ortustech-com37h3m05dtc/99dtc and sharp-lq070y3dg3b

[PATCH 0/2] drm/panel-simple: Add panel parameters for ortustech-com37h3m05dtc/99dtc and sharp-lq070y3dg3b

[H. Nikolaus Schaller]

Since v5.2-rc1 OMAP is no longer using a special display driver architecture
for DPI panels, but uses the general drm/panel/panel-simple.

So we finally can add SoC independent panel definitions for two panel models
which we already had worked on quite a while ago (before device tree was
introduced):

	https://patchwork.kernel.org/patch/2851295/



H. Nikolaus Schaller (2):
  drm/panel: simple: Add Sharp LQ070Y3DG3B panel support
  drm/panel: simple: Add Ortustech COM37H3M panel support

 drivers/gpu/drm/panel/panel-simple.c | 63 ++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

-- 
2.19.1

[PATCH 1/2] drm/panel: simple: Add Sharp LQ070Y3DG3B panel support

[H. Nikolaus Schaller]

The change adds support for the Sharp LQ070Y3DG3B 7.0" TFT LCD panel.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 drivers/gpu/drm/panel/panel-simple.c | 30 ++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 569be4efd8d1..5b27829c5a78 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2204,6 +2204,33 @@ static const struct panel_desc samsung_ltn140at29_301 = {
 	},
 };
 
+static const struct drm_display_mode sharp_lq070y3dg3b_mode = {
+	.clock = 33260,
+	.hdisplay = 800,
+	.hsync_start = 800 + 64,
+	.hsync_end = 800 + 64 + 128,
+	.htotal = 800 + 64 + 128 + 64,
+	.vdisplay = 480,
+	.vsync_start = 480 + 8,
+	.vsync_end = 480 + 8 + 2,
+	.vtotal = 480 + 8 + 2 + 35,
+	.vrefresh = 60,
+	.flags = DISPLAY_FLAGS_PIXDATA_POSEDGE,
+};
+
+static const struct panel_desc sharp_lq070y3dg3b = {
+	.modes = &sharp_lq070y3dg3b_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 152,	/* 152.4mm */
+		.height = 91,	/* 91.4mm */
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE |
+		     DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE,
+};
+
 static const struct drm_display_mode sharp_lq035q7db03_mode = {
 	.clock = 5500,
 	.hdisplay = 240,
@@ -2786,6 +2813,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "sharp,lq035q7db03",
 		.data = &sharp_lq035q7db03,
+	}, {
+		.compatible = "sharp,lq070y3dg3b",
+		.data = &sharp_lq070y3dg3b,
 	}, {
 		.compatible = "sharp,lq101k1ly04",
 		.data = &sharp_lq101k1ly04,
-- 
2.19.1

[PATCH 2/2] drm/panel: simple: Add Ortustech COM37H3M panel support

[H. Nikolaus Schaller]

The change adds support for the Ortustech COM37H3M05DTC/99DTC 3.7" TFT LCD panel.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 drivers/gpu/drm/panel/panel-simple.c | 33 ++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 5b27829c5a78..1892d00be16d 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2007,6 +2007,33 @@ static const struct panel_desc ontat_yx700wv03 = {
 	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
 };
 
+static const struct drm_display_mode ortustech_com37h3m_mode  = {
+	.clock = 22153,
+	.hdisplay = 480,
+	.hsync_start = 480 + 8,
+	.hsync_end = 480 + 8 + 10,
+	.htotal = 480 + 8 + 10 + 10,
+	.vdisplay = 640,
+	.vsync_start = 640 + 4,
+	.vsync_end = 640 + 4 + 3,
+	.vtotal = 640 + 4 + 3 + 4,
+	.vrefresh = 60,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc ortustech_com37h3m = {
+	.modes = &ortustech_com37h3m_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 56,	/* 56.16mm */
+		.height = 75,	/* 74.88mm */
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE |
+		     DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE,
+};
+
 static const struct drm_display_mode ortustech_com43h4m85ulc_mode  = {
 	.clock = 25000,
 	.hdisplay = 480,
@@ -2786,6 +2813,12 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "ontat,yx700wv03",
 		.data = &ontat_yx700wv03,
+	}, {
+		.compatible = "ortustech,com37h3m05dtc",
+		.data = &ortustech_com37h3m,
+	}, {
+		.compatible = "ortustech,com37h3m099dtc",
+		.data = &ortustech_com37h3m,
 	}, {
 		.compatible = "ortustech,com43h4m85ulc",
 		.data = &ortustech_com43h4m85ulc,
-- 
2.19.1