[PATCH v2 0/5] Add TDX Guest Support (boot fixes)

[PATCH v2 0/5] Add TDX Guest Support (boot fixes)

[Kuppuswamy Sathyanarayanan]

Hi All,

Intel's Trust Domain Extensions (TDX) protect guest VMs from malicious
hosts and some physical attacks. This series adds boot code support
and some additional fixes required for successful boot of TDX guest.

This series is the continuation of the patch series titled "Add TDX Guest
Support (Initial support)" and "Add TDX Guest Support (#VE handler support
)", which added initial support and #VE handler support for TDX guests. You
can find the related patchsets in the following links.

[set 1] - https://lore.kernel.org/patchwork/project/lkml/list/?series=505232
[set 2] - https://lore.kernel.org/patchwork/project/lkml/list/?series=506230

Also please note that this series alone is not necessarily fully
functional.

You can find TDX related documents in the following link.

https://software.intel.com/content/www/br/pt/develop/articles/intel-trust-domain-extensions.html

Changes since v1:
 * Rebased on top of v3 version of "Add TDX Guest Support (Initial support)"
   patchset. Since it had some changes at the TDCALL implementation level, we
   have to rebase other dependent patches.

Kuppuswamy Sathyanarayanan (2):
  x86/topology: Disable CPU online/offline control for TDX guest
  x86: Skip WBINVD instruction for VM guest

Sean Christopherson (3):
  x86/boot: Add a trampoline for APs booting in 64-bit mode
  x86/boot: Avoid #VE during boot for TDX platforms
  x86/tdx: Forcefully disable legacy PIC for TDX guests

 arch/x86/boot/compressed/head_64.S       | 16 +++++--
 arch/x86/boot/compressed/pgtable.h       |  2 +-
 arch/x86/include/asm/acenv.h             |  7 ++-
 arch/x86/include/asm/realmode.h          | 12 +++++
 arch/x86/kernel/head_64.S                | 20 +++++++-
 arch/x86/kernel/smpboot.c                |  2 +-
 arch/x86/kernel/tdx.c                    | 18 ++++++++
 arch/x86/kernel/topology.c               |  3 +-
 arch/x86/realmode/rm/header.S            |  1 +
 arch/x86/realmode/rm/trampoline_64.S     | 59 ++++++++++++++++++++++--
 arch/x86/realmode/rm/trampoline_common.S | 12 ++++-
 11 files changed, 138 insertions(+), 14 deletions(-)

-- 
2.25.1

[PATCH v2 1/5] x86/boot: Add a trampoline for APs booting in 64-bit mode

[Kuppuswamy Sathyanarayanan]

From: Sean Christopherson <sean.j.christopherson@intel.com>

Add a trampoline for booting APs in 64-bit mode via a software handoff
with BIOS, and use the new trampoline for the ACPI MP wake protocol used
by TDX. You can find MADT MP wake protocol details in ACPI specification
r6.4, sec 5.2.12.19.

Extend the real mode IDT pointer by four bytes to support LIDT in 64-bit
mode.  For the GDT pointer, create a new entry as the existing storage
for the pointer occupies the zero entry in the GDT itself.

Reported-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 arch/x86/include/asm/realmode.h          | 12 ++++++++
 arch/x86/kernel/smpboot.c                |  2 +-
 arch/x86/realmode/rm/header.S            |  1 +
 arch/x86/realmode/rm/trampoline_64.S     | 38 ++++++++++++++++++++++++
 arch/x86/realmode/rm/trampoline_common.S | 12 +++++++-
 5 files changed, 63 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h
index 5db5d083c873..ccdf158d5b65 100644
--- a/arch/x86/include/asm/realmode.h
+++ b/arch/x86/include/asm/realmode.h
@@ -12,6 +12,7 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/types.h>
+#include <linux/protected_guest.h>
 #include <asm/io.h>
 
 /* This must match data at realmode/rm/header.S */
@@ -25,6 +26,7 @@ struct real_mode_header {
 	u32	sev_es_trampoline_start;
 #endif
 #ifdef CONFIG_X86_64
+	u32	trampoline_start64;
 	u32	trampoline_pgd;
 #endif
 	/* ACPI S3 wakeup */
@@ -88,6 +90,16 @@ static inline void set_real_mode_mem(phys_addr_t mem)
 	real_mode_header = (struct real_mode_header *) __va(mem);
 }
 
+/* Common helper function to get start IP address */
+static inline unsigned long get_trampoline_start_ip(struct real_mode_header *rmh)
+{
+#ifdef CONFIG_X86_64
+	if (prot_guest_has(PR_GUEST_TDX))
+		return rmh->trampoline_start64;
+#endif
+	return rmh->trampoline_start;
+}
+
 void reserve_real_mode(void);
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 7770245cc7fa..3cde58849d70 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1033,7 +1033,7 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle,
 		       int *cpu0_nmi_registered)
 {
 	/* start_ip had better be page-aligned! */
-	unsigned long start_ip = real_mode_header->trampoline_start;
+	unsigned long start_ip = get_trampoline_start_ip(real_mode_header);
 
 	unsigned long boot_error = 0;
 	unsigned long timeout;
diff --git a/arch/x86/realmode/rm/header.S b/arch/x86/realmode/rm/header.S
index 8c1db5bf5d78..2eb62be6d256 100644
--- a/arch/x86/realmode/rm/header.S
+++ b/arch/x86/realmode/rm/header.S
@@ -24,6 +24,7 @@ SYM_DATA_START(real_mode_header)
 	.long	pa_sev_es_trampoline_start
 #endif
 #ifdef CONFIG_X86_64
+	.long	pa_trampoline_start64
 	.long	pa_trampoline_pgd;
 #endif
 	/* ACPI S3 wakeup */
diff --git a/arch/x86/realmode/rm/trampoline_64.S b/arch/x86/realmode/rm/trampoline_64.S
index cc8391f86cdb..ae112a91592f 100644
--- a/arch/x86/realmode/rm/trampoline_64.S
+++ b/arch/x86/realmode/rm/trampoline_64.S
@@ -161,6 +161,19 @@ SYM_CODE_START(startup_32)
 	ljmpl	$__KERNEL_CS, $pa_startup_64
 SYM_CODE_END(startup_32)
 
+SYM_CODE_START(pa_trampoline_compat)
+	/*
+	 * In compatibility mode.  Prep ESP and DX for startup_32, then disable
+	 * paging and complete the switch to legacy 32-bit mode.
+	 */
+	movl	$rm_stack_end, %esp
+	movw	$__KERNEL_DS, %dx
+
+	movl	$X86_CR0_PE, %eax
+	movl	%eax, %cr0
+	ljmpl   $__KERNEL32_CS, $pa_startup_32
+SYM_CODE_END(pa_trampoline_compat)
+
 	.section ".text64","ax"
 	.code64
 	.balign 4
@@ -169,6 +182,20 @@ SYM_CODE_START(startup_64)
 	jmpq	*tr_start(%rip)
 SYM_CODE_END(startup_64)
 
+SYM_CODE_START(trampoline_start64)
+	/*
+	 * APs start here on a direct transfer from 64-bit BIOS with identity
+	 * mapped page tables.  Load the kernel's GDT in order to gear down to
+	 * 32-bit mode (to handle 4-level vs. 5-level paging), and to (re)load
+	 * segment registers.  Load the zero IDT so any fault triggers a
+	 * shutdown instead of jumping back into BIOS.
+	 */
+	lidt	tr_idt(%rip)
+	lgdt	tr_gdt64(%rip)
+
+	ljmpl	*tr_compat(%rip)
+SYM_CODE_END(trampoline_start64)
+
 	.section ".rodata","a"
 	# Duplicate the global descriptor table
 	# so the kernel can live anywhere
@@ -182,6 +209,17 @@ SYM_DATA_START(tr_gdt)
 	.quad	0x00cf93000000ffff	# __KERNEL_DS
 SYM_DATA_END_LABEL(tr_gdt, SYM_L_LOCAL, tr_gdt_end)
 
+SYM_DATA_START(tr_gdt64)
+	.short	tr_gdt_end - tr_gdt - 1	# gdt limit
+	.long	pa_tr_gdt
+	.long	0
+SYM_DATA_END(tr_gdt64)
+
+SYM_DATA_START(tr_compat)
+	.long	pa_trampoline_compat
+	.short	__KERNEL32_CS
+SYM_DATA_END(tr_compat)
+
 	.bss
 	.balign	PAGE_SIZE
 SYM_DATA(trampoline_pgd, .space PAGE_SIZE)
diff --git a/arch/x86/realmode/rm/trampoline_common.S b/arch/x86/realmode/rm/trampoline_common.S
index 5033e640f957..4331c32c47f8 100644
--- a/arch/x86/realmode/rm/trampoline_common.S
+++ b/arch/x86/realmode/rm/trampoline_common.S
@@ -1,4 +1,14 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 	.section ".rodata","a"
 	.balign	16
-SYM_DATA_LOCAL(tr_idt, .fill 1, 6, 0)
+
+/*
+ * When a bootloader hands off to the kernel in 32-bit mode an
+ * IDT with a 2-byte limit and 4-byte base is needed. When a boot
+ * loader hands off to a kernel 64-bit mode the base address
+ * extends to 8-bytes. Reserve enough space for either scenario.
+ */
+SYM_DATA_START_LOCAL(tr_idt)
+	.short  0
+	.quad   0
+SYM_DATA_END(tr_idt)
-- 
2.25.1

[PATCH v2 2/5] x86/boot: Avoid #VE during boot for TDX platforms

[Kuppuswamy Sathyanarayanan]

From: Sean Christopherson <sean.j.christopherson@intel.com>

There are a few MSRs and control register bits which the kernel
normally needs to modify during boot. But, TDX disallows
modification of these registers to help provide consistent
security guarantees. Fortunately, TDX ensures that these are all
in the correct state before the kernel loads, which means the
kernel has no need to modify them.

The conditions to avoid are:

  * Any writes to the EFER MSR
  * Clearing CR0.NE
  * Clearing CR3.MCE

This theoretically makes guest boot more fragile. If, for
instance, EFER was set up incorrectly and a WRMSR was performed,
it will trigger early exception panic or a triple fault, if it's
before early exceptions are set up. However, this is likely to
trip up the guest BIOS long before control reaches the kernel. In
any case, these kinds of problems are unlikely to occur in
production environments, and developers have good debug
tools to fix them quickly. 

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 arch/x86/boot/compressed/head_64.S   | 16 ++++++++++++----
 arch/x86/boot/compressed/pgtable.h   |  2 +-
 arch/x86/kernel/head_64.S            | 20 ++++++++++++++++++--
 arch/x86/realmode/rm/trampoline_64.S | 23 +++++++++++++++++++----
 4 files changed, 50 insertions(+), 11 deletions(-)

diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index a2347ded77ea..0c68e3adc940 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -640,12 +640,20 @@ SYM_CODE_START(trampoline_32bit_src)
 	movl	$MSR_EFER, %ecx
 	rdmsr
 	btsl	$_EFER_LME, %eax
+	/* Avoid writing EFER if no change was made (for TDX guest) */
+	jc	1f
 	wrmsr
-	popl	%edx
+1:	popl	%edx
 	popl	%ecx
 
 	/* Enable PAE and LA57 (if required) paging modes */
-	movl	$X86_CR4_PAE, %eax
+	movl	%cr4, %eax
+	/*
+	 * Clear all bits except CR4.MCE, which is preserved.
+	 * Clearing CR4.MCE will #VE in TDX guests.
+	 */
+	andl	$X86_CR4_MCE, %eax
+	orl	$X86_CR4_PAE, %eax
 	testl	%edx, %edx
 	jz	1f
 	orl	$X86_CR4_LA57, %eax
@@ -659,8 +667,8 @@ SYM_CODE_START(trampoline_32bit_src)
 	pushl	$__KERNEL_CS
 	pushl	%eax
 
-	/* Enable paging again */
-	movl	$(X86_CR0_PG | X86_CR0_PE), %eax
+	/* Enable paging again. Avoid clearing X86_CR0_NE for TDX */
+	movl	$(X86_CR0_PG | X86_CR0_NE | X86_CR0_PE), %eax
 	movl	%eax, %cr0
 
 	lret
diff --git a/arch/x86/boot/compressed/pgtable.h b/arch/x86/boot/compressed/pgtable.h
index 6ff7e81b5628..cc9b2529a086 100644
--- a/arch/x86/boot/compressed/pgtable.h
+++ b/arch/x86/boot/compressed/pgtable.h
@@ -6,7 +6,7 @@
 #define TRAMPOLINE_32BIT_PGTABLE_OFFSET	0
 
 #define TRAMPOLINE_32BIT_CODE_OFFSET	PAGE_SIZE
-#define TRAMPOLINE_32BIT_CODE_SIZE	0x70
+#define TRAMPOLINE_32BIT_CODE_SIZE	0x80
 
 #define TRAMPOLINE_32BIT_STACK_END	TRAMPOLINE_32BIT_SIZE
 
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 04bddaaba8e2..6cf8d126b80a 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -141,7 +141,13 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
 1:
 
 	/* Enable PAE mode, PGE and LA57 */
-	movl	$(X86_CR4_PAE | X86_CR4_PGE), %ecx
+	movq	%cr4, %rcx
+	/*
+	 * Clear all bits except CR4.MCE, which is preserved.
+	 * Clearing CR4.MCE will #VE in TDX guests.
+	 */
+	andl	$X86_CR4_MCE, %ecx
+	orl	$(X86_CR4_PAE | X86_CR4_PGE), %ecx
 #ifdef CONFIG_X86_5LEVEL
 	testl	$1, __pgtable_l5_enabled(%rip)
 	jz	1f
@@ -229,13 +235,23 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
 	/* Setup EFER (Extended Feature Enable Register) */
 	movl	$MSR_EFER, %ecx
 	rdmsr
+	/*
+	 * Preserve current value of EFER for comparison and to skip
+	 * EFER writes if no change was made (for TDX guest)
+	 */
+	movl    %eax, %edx
 	btsl	$_EFER_SCE, %eax	/* Enable System Call */
 	btl	$20,%edi		/* No Execute supported? */
 	jnc     1f
 	btsl	$_EFER_NX, %eax
 	btsq	$_PAGE_BIT_NX,early_pmd_flags(%rip)
-1:	wrmsr				/* Make changes effective */
 
+	/* Avoid writing EFER if no change was made (for TDX guest) */
+1:	cmpl	%edx, %eax
+	je	1f
+	xor	%edx, %edx
+	wrmsr				/* Make changes effective */
+1:
 	/* Setup cr0 */
 	movl	$CR0_STATE, %eax
 	/* Make changes effective */
diff --git a/arch/x86/realmode/rm/trampoline_64.S b/arch/x86/realmode/rm/trampoline_64.S
index ae112a91592f..0fdd74054044 100644
--- a/arch/x86/realmode/rm/trampoline_64.S
+++ b/arch/x86/realmode/rm/trampoline_64.S
@@ -143,13 +143,27 @@ SYM_CODE_START(startup_32)
 	movl	%eax, %cr3
 
 	# Set up EFER
+	movl	$MSR_EFER, %ecx
+	rdmsr
+	/*
+	 * Skip writing to EFER if the register already has desired
+	 * value (to avoid #VE for the TDX guest).
+	 */
+	cmp	pa_tr_efer, %eax
+	jne	.Lwrite_efer
+	cmp	pa_tr_efer + 4, %edx
+	je	.Ldone_efer
+.Lwrite_efer:
 	movl	pa_tr_efer, %eax
 	movl	pa_tr_efer + 4, %edx
-	movl	$MSR_EFER, %ecx
 	wrmsr
 
-	# Enable paging and in turn activate Long Mode
-	movl	$(X86_CR0_PG | X86_CR0_WP | X86_CR0_PE), %eax
+.Ldone_efer:
+	/*
+	 * Enable paging and in turn activate Long Mode. Avoid clearing
+	 * X86_CR0_NE for TDX.
+	 */
+	movl	$(X86_CR0_PG | X86_CR0_WP | X86_CR0_NE | X86_CR0_PE), %eax
 	movl	%eax, %cr0
 
 	/*
@@ -169,7 +183,8 @@ SYM_CODE_START(pa_trampoline_compat)
 	movl	$rm_stack_end, %esp
 	movw	$__KERNEL_DS, %dx
 
-	movl	$X86_CR0_PE, %eax
+	/* Avoid clearing X86_CR0_NE for TDX */
+	movl	$(X86_CR0_NE | X86_CR0_PE), %eax
 	movl	%eax, %cr0
 	ljmpl   $__KERNEL32_CS, $pa_startup_32
 SYM_CODE_END(pa_trampoline_compat)
-- 
2.25.1

[PATCH v2 3/5] x86/topology: Disable CPU online/offline control for TDX guest

[Kuppuswamy Sathyanarayanan]

As per Intel TDX Virtual Firmware Design Guide, sec 4.3.5 and
sec 9.4, all unused CPUs are put in spinning state by
TDVF until OS requests for CPU bring-up via mailbox address passed
by ACPI MADT table. Since by default all unused CPUs are always in
spinning state, there is no point in supporting dynamic CPU
online/offline feature. So current generation of TDVF does not
support CPU hotplug feature. It may be supported in next generation.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
---

Changes since v1:
 * Replaced is_tdx_guest() check with prot_guest_has(PR_GUEST_TDX).

 arch/x86/kernel/tdx.c      | 15 +++++++++++++++
 arch/x86/kernel/topology.c |  3 ++-
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/tdx.c b/arch/x86/kernel/tdx.c
index b0ffa106f2e9..63fa1647b425 100644
--- a/arch/x86/kernel/tdx.c
+++ b/arch/x86/kernel/tdx.c
@@ -5,6 +5,7 @@
 #define pr_fmt(fmt)     "x86/tdx: " fmt
 
 #include <linux/protected_guest.h>
+#include <linux/cpuhotplug.h>
 
 #include <asm/tdx.h>
 #include <asm/vmx.h>
@@ -306,6 +307,17 @@ static int tdg_handle_mmio(struct pt_regs *regs, struct ve_info *ve)
 	return insn.length;
 }
 
+static int tdg_cpu_offline_prepare(unsigned int cpu)
+{
+	/*
+	 * Per Intel TDX Virtual Firmware Design Guide,
+	 * sec 4.3.5 and sec 9.4, Hotplug is not supported
+	 * in TDX platforms. So don't support CPU
+	 * offline feature once it is turned on.
+	 */
+	return -EOPNOTSUPP;
+}
+
 unsigned long tdg_get_ve_info(struct ve_info *ve)
 {
 	u64 ret;
@@ -446,5 +458,8 @@ void __init tdx_early_init(void)
 	pv_ops.irq.safe_halt = tdg_safe_halt;
 	pv_ops.irq.halt = tdg_halt;
 
+	cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "tdg:cpu_hotplug",
+			  NULL, tdg_cpu_offline_prepare);
+
 	pr_info("Guest initialized\n");
 }
diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c
index bd83748e2bde..7b5fab69d56e 100644
--- a/arch/x86/kernel/topology.c
+++ b/arch/x86/kernel/topology.c
@@ -32,6 +32,7 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/irq.h>
+#include <linux/protected_guest.h>
 #include <asm/io_apic.h>
 #include <asm/cpu.h>
 
@@ -130,7 +131,7 @@ int arch_register_cpu(int num)
 			}
 		}
 	}
-	if (num || cpu0_hotpluggable)
+	if ((num || cpu0_hotpluggable) && !prot_guest_has(PR_GUEST_TDX))
 		per_cpu(cpu_devices, num).cpu.hotpluggable = 1;
 
 	return register_cpu(&per_cpu(cpu_devices, num).cpu, num);
-- 
2.25.1

[PATCH v2 4/5] x86/tdx: Forcefully disable legacy PIC for TDX guests

[Kuppuswamy Sathyanarayanan]

From: Sean Christopherson <sean.j.christopherson@intel.com>

Disable the legacy PIC (8259) for TDX guests as the PIC cannot be
supported by the VMM. TDX Module does not allow direct IRQ injection,
and using posted interrupt style delivery requires the guest to EOI
the IRQ, which diverges from the legacy PIC behavior.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 arch/x86/kernel/tdx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/kernel/tdx.c b/arch/x86/kernel/tdx.c
index 63fa1647b425..3aded572ad8c 100644
--- a/arch/x86/kernel/tdx.c
+++ b/arch/x86/kernel/tdx.c
@@ -8,6 +8,7 @@
 #include <linux/cpuhotplug.h>
 
 #include <asm/tdx.h>
+#include <asm/i8259.h>
 #include <asm/vmx.h>
 #include <asm/insn.h>
 #include <asm/insn-eval.h>
@@ -458,6 +459,8 @@ void __init tdx_early_init(void)
 	pv_ops.irq.safe_halt = tdg_safe_halt;
 	pv_ops.irq.halt = tdg_halt;
 
+	legacy_pic = &null_legacy_pic;
+
 	cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "tdg:cpu_hotplug",
 			  NULL, tdg_cpu_offline_prepare);
 
-- 
2.25.1

[PATCH v2 5/5] x86: Skip WBINVD instruction for VM guest

[Kuppuswamy Sathyanarayanan]

VM guests that supports ACPI, use standard ACPI mechanisms to signal
sleep state entry (including reboot) to the host. The ACPI
specification mandates WBINVD on any sleep state entry with the
expectation that the platform is only responsible for maintaining the
state of memory over sleep states, not preserving dirty data in any
CPU caches. ACPI cache flushing requirements pre-date the advent of
virtualization. Given guest sleep state entry does not affect any
host power rails it is not required to flush caches. The host is
responsible for maintaining cache state over its own bare metal sleep
state transitions that power-off the cache. A TDX guest, unlike a
typical guest, will machine check if the CPU cache is powered off.

Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: linux-acpi@vger.kernel.org
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 arch/x86/include/asm/acenv.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/acenv.h b/arch/x86/include/asm/acenv.h
index 9aff97f0de7f..d4162e94bee8 100644
--- a/arch/x86/include/asm/acenv.h
+++ b/arch/x86/include/asm/acenv.h
@@ -10,10 +10,15 @@
 #define _ASM_X86_ACENV_H
 
 #include <asm/special_insns.h>
+#include <asm/cpu.h>
 
 /* Asm macros */
 
-#define ACPI_FLUSH_CPU_CACHE()	wbinvd()
+#define ACPI_FLUSH_CPU_CACHE()				\
+do {							\
+	if (!boot_cpu_has(X86_FEATURE_HYPERVISOR))	\
+		wbinvd();				\
+} while (0)
 
 int __acpi_acquire_global_lock(unsigned int *lock);
 int __acpi_release_global_lock(unsigned int *lock);
-- 
2.25.1