From: Stefano Radaelli <stefano.radaelli21@gmail.com>
To: Frank Li <Frank.Li@nxp.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Cc: pierluigi.p@variscite.com,
Stefano Radaelli <stefano.r@variscite.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Daniel Baluta <daniel.baluta@nxp.com>
Subject: [PATCH v3 0/2] arm64: dts: freescale: imx93-var: Add Cortex-M33 configurations
Date: Thu, 19 Nov 2026 17:00:52 +0100 [thread overview]
Message-ID: <cover.1795103362.git.stefano.r@variscite.com> (raw)
This series adds Cortex-M33 overlays and combined DTBs for DART-MX93 on
Sonata and VAR-SOM-MX93 on Symphony.
The first patch extracts the existing DART-MX93 remoteproc configuration
into a common include without changing the resulting DTB. The second adds
the M33 variants, reserving the peripherals used by the firmware and
keeping dependent devices disabled. Remoteproc and MU1 are then enabled
only through the M33 overlays.
Changes in v3:
- Split the common configuration extraction and the M33 overlays into two
patches
- Use "reserved" for peripherals assigned to the M33 firmware; keep
"disabled" for dependent devices.
Changes in v2:
- Enable cm33 and MU1 only through the M33 overlay on DART-MX93.
Patch 2 uses the following binding and driver commits, already in
linux-next:
- ebb21cc5d1c0 ("dt-bindings: remoteproc: imx_rproc: Document
memory-region-names to avoid implicit ABI")
- 8396089f91fa ("remoteproc: imx_rpoc: Use memory-region-names to avoid
implicit ABI")
Validation used the remoteproc binding update and cebd1c0961d8
("dt-bindings: gpio: vf610: fix clock requirements per SoC"), which fixes
pre-existing GPIO schema errors. The base and M33 DTBs build and pass
schema validation.
No hardware testing was performed.
Stefano Radaelli (2):
arm64: dts: freescale: imx93-var: Extract common Cortex-M33
configuration
arm64: dts: freescale: imx93-var: Add Cortex-M33 configurations
arch/arm64/boot/dts/freescale/Makefile | 9 +++
.../dts/freescale/imx93-var-common-m33.dtsi | 24 ++++++++
.../freescale/imx93-var-dart-sonata-m33.dtso | 55 +++++++++++++++++++
.../dts/freescale/imx93-var-dart-sonata.dts | 2 +-
.../boot/dts/freescale/imx93-var-dart.dtsi | 14 -----
.../freescale/imx93-var-som-symphony-m33.dtso | 50 +++++++++++++++++
6 files changed, 139 insertions(+), 15 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-dart-sonata-m33.dtso
create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-som-symphony-m33.dtso
base-commit: 33adc96ac217d6e95b7c44ac383c19ca4ae2ff52
--
2.47.3
next reply other threads:[~2026-11-19 16:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 16:00 Stefano Radaelli [this message]
2026-11-19 16:00 ` [PATCH v3 1/2] arm64: dts: freescale: imx93-var: Extract common Cortex-M33 configuration Stefano Radaelli
2026-11-19 16:00 ` [PATCH v3 2/2] arm64: dts: freescale: imx93-var: Add Cortex-M33 configurations Stefano Radaelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1795103362.git.stefano.r@variscite.com \
--to=stefano.radaelli21@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=daniel.baluta@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pierluigi.p@variscite.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=stefano.r@variscite.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®