mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Stefano Radaelli <stefano.radaelli21@gmail.com>
To: Frank Li <Frank.Li@nxp.com>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Cc: pierluigi.p@variscite.com,
	Stefano Radaelli <stefano.r@variscite.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Daniel Baluta <daniel.baluta@nxp.com>
Subject: [PATCH v3 2/2] arm64: dts: freescale: imx93-var: Add Cortex-M33 configurations
Date: Thu, 19 Nov 2026 17:00:54 +0100	[thread overview]
Message-ID: <f52268cdb748fc4fcca95f8de1384054da8d7964.1795103362.git.stefano.r@variscite.com> (raw)
In-Reply-To: <cover.1795103362.git.stefano.r@variscite.com>

From: Stefano Radaelli <stefano.r@variscite.com>

Add Cortex-M33 overlays and combined DTBs for DART-MX93 on Sonata and
VAR-SOM-MX93 on Symphony. Use the common remoteproc configuration and
identify the existing reserved memory with memory-region-names.

Include the common configuration only from the overlays, so remoteproc
and MU1 are enabled only in the M33 variants. Use the -m33 DTB when
remoteproc support is needed.

Mark the peripherals used by the M33 firmware as reserved. Disable Wi-Fi,
Bluetooth and the devices depending on GPIO4. On Sonata, also disable USB
OTG1 because its USB-C role controller is unavailable.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
Changes in v3:
- Move the common configuration extraction to patch 1.
- Use "reserved" for peripherals assigned to the M33 firmware; keep
  "disabled" for dependent devices.

Changes in v2:
- Enable cm33 and MU1 only through the M33 overlay on DART-MX93.

This patch uses the following binding and driver commits, already in
linux-next:

- ebb21cc5d1c0 ("dt-bindings: remoteproc: imx_rproc: Document
  memory-region-names to avoid implicit ABI")
- 8396089f91fa ("remoteproc: imx_rpoc: Use memory-region-names to avoid
  implicit ABI")

 arch/arm64/boot/dts/freescale/Makefile        |  9 +++
 .../dts/freescale/imx93-var-common-m33.dtsi   |  2 +
 .../freescale/imx93-var-dart-sonata-m33.dtso  | 55 +++++++++++++++++++
 .../dts/freescale/imx93-var-dart-sonata.dts   |  2 +-
 .../boot/dts/freescale/imx93-var-dart.dtsi    |  1 -
 .../freescale/imx93-var-som-symphony-m33.dtso | 50 +++++++++++++++++
 6 files changed, 117 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-dart-sonata-m33.dtso
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-som-symphony-m33.dtso

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index cfd548284358..05a7556e9de9 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -956,8 +956,17 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-mini-ezurio-wlan.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-mini-lvds-tm070jvhg33.dtb
+
+imx93-var-dart-sonata-m33-dtbs := imx93-var-dart-sonata.dtb imx93-var-dart-sonata-m33.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-dart-sonata.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-dart-sonata-m33.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-dart-sonata-m33.dtbo
+
+imx93-var-som-symphony-m33-dtbs := imx93-var-som-symphony.dtb imx93-var-som-symphony-m33.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony-m33.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony-m33.dtbo
+
 dtb-$(CONFIG_ARCH_MXC) += imx93w-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93w-frdm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi
index de0e56f322a2..51b4cfe143d4 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi
@@ -14,6 +14,8 @@ &mu1 1 1
 		  &mu1 3 1>;
 	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
 			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	memory-region-names = "vdev0buffer", "vdev0vring0", "vdev0vring1",
+			      "vdev1vring0", "vdev1vring1", "rsc-table";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata-m33.dtso b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata-m33.dtso
new file mode 100644
index 000000000000..51ec0beea7c9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata-m33.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Cortex-M33 support for Variscite DART-MX93 on Sonata-Board
+ *
+ * Link: https://variscite.com/carrier-boards/sonata-board/
+ *
+ * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "imx93-var-common-m33.dtsi"
+
+/* Reserve the peripherals used by the Cortex-M33 firmware. */
+&flexcan1 {
+	status = "reserved";
+};
+
+&gpio4 {
+	status = "reserved";
+};
+
+&lpspi5 {
+	status = "reserved";
+};
+
+/* Disable Bluetooth along with Wi-Fi and release the JTAG pins. */
+&lpuart5 {
+	status = "disabled";
+};
+
+&lpuart7 {
+	status = "reserved";
+};
+
+/* The USB-C role controller uses an interrupt on GPIO4. */
+&ptn5150 {
+	status = "disabled";
+};
+
+/* The USB-C role controller is unavailable. */
+&usbotg1 {
+	status = "disabled";
+};
+
+/* Wi-Fi reset is connected to GPIO4. */
+&usdhc3 {
+	status = "disabled";
+};
+
+&wifi_pwrseq {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts
index 1ca3ec8330d0..e3afd0efe5c7 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts
@@ -291,7 +291,7 @@ ft5x06_ts: touchscreen@38 {
 	};
 
 	/* USB Type-C Controller */
-	typec@3d {
+	ptn5150: typec@3d {
 		compatible = "nxp,ptn5150";
 		reg = <0x3d>;
 		interrupt-parent = <&gpio4>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi
index 4ee4d74cadea..6c596d61bd21 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi
@@ -12,7 +12,6 @@
 
 #include <dt-bindings/usb/pd.h>
 #include "imx93.dtsi"
-#include "imx93-var-common-m33.dtsi"
 
 / {
 	model = "Variscite DART-MX93 Module";
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony-m33.dtso b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony-m33.dtso
new file mode 100644
index 000000000000..8df03ed3c004
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony-m33.dtso
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Cortex-M33 support for Variscite VAR-SOM-MX93 on Symphony-Board
+ *
+ * Link: https://variscite.com/carrier-boards/symphony-board/
+ *
+ * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "imx93-var-common-m33.dtsi"
+
+/* The resistive touchscreen uses GPIO4. */
+&ads7846 {
+	status = "disabled";
+};
+
+/* Reserve the peripherals used by the Cortex-M33 firmware. */
+&flexcan1 {
+	status = "reserved";
+};
+
+&gpio4 {
+	status = "reserved";
+};
+
+&lpspi6 {
+	status = "reserved";
+};
+
+/* Disable Bluetooth along with Wi-Fi and release the JTAG pins. */
+&lpuart5 {
+	status = "disabled";
+};
+
+&lpuart7 {
+	status = "reserved";
+};
+
+/* Wi-Fi reset is connected to GPIO4. */
+&usdhc3 {
+	status = "disabled";
+};
+
+&usdhc3_pwrseq {
+	status = "disabled";
+};
-- 
2.47.3


      parent reply	other threads:[~2026-11-19 16:01 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-19 16:00 [PATCH v3 0/2] " Stefano Radaelli
2026-11-19 16:00 ` [PATCH v3 1/2] arm64: dts: freescale: imx93-var: Extract common Cortex-M33 configuration Stefano Radaelli
2026-11-19 16:00 ` Stefano Radaelli [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f52268cdb748fc4fcca95f8de1384054da8d7964.1795103362.git.stefano.r@variscite.com \
    --to=stefano.radaelli21@gmail.com \
    --cc=Frank.Li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel.baluta@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pierluigi.p@variscite.com \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=stefano.r@variscite.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®