Re: [RFC PATCH 28/33] irqchip/gic-v3-its: Support VPE doorbell invalidation even when !DirectLPI

[Marc Zyngier <marc.zyngier@arm.com>]

On 14/02/17 00:44, Shanker Donthineni wrote:
> Hi Marc,
> 
> 
> On 01/17/2017 04:20 AM, Marc Zyngier wrote:
>> When we don't have the DirectLPI feature, we must work around the
>> architecture shortcomings to be able to perform the required
>> invalidation.
>>
>> For this, we create a fake device whose sole purpose is to
>> provide a way to issue a map/inv/unmap sequence (and the corresponding
>> sync operations). That's 6 commands and a full serialization point
>> to be able to do this.
>>
>> You just have hope the hypervisor won't do that too often...
>>
>> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
>> ---
>>   drivers/irqchip/irq-gic-v3-its.c | 59
>> ++++++++++++++++++++++++++++++++++++++--
>>   1 file changed, 57 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/irqchip/irq-gic-v3-its.c
>> b/drivers/irqchip/irq-gic-v3-its.c
>> index 008fb71..3787579 100644
>> --- a/drivers/irqchip/irq-gic-v3-its.c
>> +++ b/drivers/irqchip/irq-gic-v3-its.c
>> @@ -133,6 +133,9 @@ struct its_device {
>>   	u32			device_id;
>>   };
>>   
>> +static struct its_device *vpe_proxy_dev;
>> +static DEFINE_RAW_SPINLOCK(vpe_proxy_dev_lock);
>> +
>>   static LIST_HEAD(its_nodes);
>>   static DEFINE_SPINLOCK(its_lock);
>>   static struct rdists *gic_rdists;
>> @@ -993,8 +996,35 @@ static void lpi_update_config(struct irq_data *d, u8
>> clr, u8 set)
>>   		struct its_vpe *vpe = irq_data_get_irq_chip_data(d);
>>   		void __iomem *rdbase;
>>   
>> -		rdbase = per_cpu_ptr(gic_rdists->rdist,
>> vpe->col_idx)->rd_base;
>> -		writeq_relaxed(d->hwirq, rdbase + GICR_INVLPIR);
>> +		if (gic_rdists->has_direct_lpi) {
>> +			rdbase = per_cpu_ptr(gic_rdists->rdist,
>> vpe->col_idx)->rd_base;
>> +			writeq_relaxed(d->hwirq, rdbase + GICR_INVLPIR);
>> +		} else {
>> +			/*
>> +			 * This is insane.
>> +			 *
>> +			 * If a GICv4 doesn't implement Direct LPIs,
>> +			 * the only way to perform an invalidate is to
>> +			 * use a fake device to issue a MAP/INV/UNMAP
>> +			 * sequence. Since each of these commands has
>> +			 * a sync operation, this is really fast. Not.
>> +			 *
>> +			 * We always use event 0, and this serialize
>> +			 * all VPE invalidations in the system.
>> +			 *
>> +			 * Broken by design(tm).
>> +			 */
>> +			unsigned long flags;
>> +
>> +			raw_spin_lock_irqsave(&vpe_proxy_dev_lock, flags);
>> +
>> +			vpe_proxy_dev->event_map.col_map[0] =
>> vpe->col_idx;
>> +			its_send_mapvi(vpe_proxy_dev, vpe->vpe_db_lpi, 0);
>> +			its_send_inv(vpe_proxy_dev, 0);
>> +			its_send_discard(vpe_proxy_dev, 0);
>> +
>> +			raw_spin_unlock_irqrestore(&vpe_proxy_dev_lock,
>> flags);
>> +		}
>>   	}
>>   }
>>   
>> @@ -2481,6 +2511,31 @@ static struct irq_domain *its_init_vpe_domain(void)
>>   	struct fwnode_handle *handle;
>>   	struct irq_domain *domain;
>>   
>> +	if (gic_rdists->has_direct_lpi) {
>> +		pr_info("ITS: Using DirectLPI for VPE invalidation\n");
>> +	} else {
>> +		struct its_node *its;
>> +
>> +		list_for_each_entry(its, &its_nodes, entry) {
>> +			u32 devid;
>> +
>> +			if (!its->is_v4)
>> +				continue;
>> +
>> +			/* Use the last possible DevID */
>> +			devid = GENMASK(its->device_ids - 1, 0);
> How do we know this 'devid' is not being used by real hardware devices? 

You can't know it. Or rather, you find out once it is too late.

> I think we need some kind check in its_msi_prepare() to skip this device 
> or WARN.

Yup. I've now added some code to that effect. I may add a command-line
option to specify a "safe" DevID in the future, but only if we hit this
in real life.

> Unfortunately Qualcomm doesn't support Direct LPI feature.

I feel sorry for you :-(. I don't understand why this wasn't made
mandatory with GICv4, because the amount of pain you have to go through
to invalidate a doorbell is unbelievable.

	M.
-- 
Jazz is not dead. It just smells funny...