Re: [PATCH 0/2] mtd: spi-nor: add stm32 qspi driver

[Ludovic BARRE <ludovic.barre@st.com>]

hi Cyrille

I see your patch series

[PATCH v5 0/6] mtd: spi-nor: parse SFDP tables to setup (Q)SPI memories

No problem, I rebase my V2 onto your patch


BR
Ludo

On 03/29/2017 06:51 PM, Cyrille Pitchen wrote:
> Hi Ludovic,
>
> Le 27/03/2017 à 14:54, Ludovic Barre a écrit :
>> From: Ludovic Barre <ludovic.barre@st.com>
>>
>> This patch set adds a SPI-NOR driver for stm32 QSPI controller.
>> It is a specialized SPI interface for serial Flash devices.
>> It supports 1 or 2 Flash device with single, dual and quad SPI Flash memories.
>>
>> It can operate in any of the following modes:
>> -indirect mode: all the operations are performed using the quadspi
>>   registers
>> -read memory-mapped mode: the external Flash memory is mapped to the
>>   microcontroller address space and is seen by the system as if it was
>>   an internal memory
>>
>> Ludovic Barre (2):
>>    dt-bindings: Document the STM32 QSPI bindings
>>    mtd: spi-nor: add driver for STM32 quad spi flash controller
>>
>>   .../devicetree/bindings/mtd/stm32-quadspi.txt      |  45 ++
>>   drivers/mtd/spi-nor/Kconfig                        |   7 +
>>   drivers/mtd/spi-nor/Makefile                       |   1 +
>>   drivers/mtd/spi-nor/stm32-quadspi.c                | 679 +++++++++++++++++++++
>>   4 files changed, 732 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/mtd/stm32-quadspi.txt
>>   create mode 100644 drivers/mtd/spi-nor/stm32-quadspi.c
>>
> Just a small word to warn you that I'm likely to ask you to rebase this
> series onto the patch "mtd: spi-nor: introduce more SPI protocols and
> the Dual Transfer Mode". Indeed, I need to synchronize with Marek first
> but I plan to merge this patch within few days.
>
>
> Best regards,
>
> Cyrille