From: Damien Le Moal <dlemoal@kernel.org>
To: Imre Kaloz <kaloz@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
Lee Jones <lee@kernel.org>, Niklas Cassel <cassel@kernel.org>,
linux-ide@vger.kernel.org
Subject: Re: [PATCH v2 47/53] MAINTAINERS: add an entry for the SGI IOC4 ATA driver
Date: Tue, 13 Oct 2026 17:13:43 +0200 [thread overview]
Message-ID: <d303c874-239b-42ec-b3b5-ff3f6f6f7a31@kernel.org> (raw)
In-Reply-To: <70b2e9c4-0b8a-1b73-1690-e9c31fbe080d@kernel.org>
On 2026/10/13 15:38, Imre Kaloz wrote:
> As for merging: pata_sgiioc4 depends on the IOC4 support added earlier in
> the series (asm/sn/ioc4.h and the MFD cell), so I’d like it to go through
> the MIPS tree with your ack, if that works for you.
OK for me to have this go through the mips tree.
--
Damien Le Moal
Western Digital Research
next prev parent reply other threads:[~2026-10-13 15:13 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-13 13:16 [PATCH v2 00/53] MIPS: SGI-IP27: add support for the IP35 (Bedrock hub) machines Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 01/53] MIPS: PCI: xtalk-bridge: refuse device numbers past the last slot Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 02/53] MIPS: PCI: xtalk-bridge: assign slots the PROM leaves unconfigured Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 03/53] MIPS: PCI: xtalk-bridge: write a type 1 IOC3 through the type 1 window Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 04/53] MIPS: PCI: xtalk-bridge: flush config space writes Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 05/53] MIPS: PCI: xtalk-bridge: reassign slots whose devio window maps elsewhere Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 06/53] MIPS: Xtalk: guard the widget identification table from assembly Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 07/53] MIPS: SGI-IP27: dump the NMI save areas the CPU scan recorded Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 08/53] MIPS: SGI-IP27: add REMOTE_HUB_PI_S()/REMOTE_HUB_PI_L() Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 09/53] MIPS: SGI-IP27: detect Bedrock hubs at boot Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 10/53] MIPS: SGI-IP27: widen Kconfig for the Bedrock-based machines Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 11/53] MIPS: SGI-IP27: fold the dead SN1 arm out of klconfig.h Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 12/53] MIPS: SGI-IP27: choose the node address layout at runtime Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 13/53] MIPS: SGI-IP27: add the Bedrock hub register windows Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 14/53] MIPS: SGI-IP27: decode a Bedrock hub's node id and system size Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 15/53] MIPS: SGI-IP27: put a Bedrock hub's boot CPU in slot 0 Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 16/53] MIPS: SGI-IP27: lay out node memory in 1GB banks on Bedrock hubs Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 17/53] MIPS: SGI-IP27: reserve the bottom 64MB of node 0 " Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 18/53] MIPS: SGI-IP27: route interrupt masks and slices through both PIs Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 19/53] MIPS: SGI-IP27: address a CPU's own PI for NMI, IPI and RT counter Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 20/53] MIPS: SGI-IP27: take a CPU's node from the CPU table in per_cpu_init() Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 21/53] MIPS: SGI-IP27: resolve the mapped-kernel node shift at runtime Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 22/53] MIPS: SGI-IP27: load the kernel at node offset 0x40000 Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 23/53] MIPS: SGI-IP27: xbow_probe(): recognize KLTYPE_PBRICK_XBOW Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 24/53] MIPS: ip27_defconfig: enable the IOC3 MFD, its cell drivers and tg3 Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 25/53] net: ethernet: sgi: ioc3-eth: apply the DMA attributes only to 64-bit addresses Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 26/53] MIPS: SGI-IP27: pick the XBridge and PIC DMA address form by mask Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 27/53] MIPS: SGI-IP27: recognize the PXBow crossbar Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 28/53] MIPS: PCI: xtalk-bridge: recognize the PIC widget's 64-bit-only registers Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 29/53] MIPS: PCI: xtalk-bridge: match PIC's register-level differences Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 30/53] rtc: m48t35: support the SGI IP35 timekeeper's 1968 year base Imre Kaloz
2026-10-13 14:28 ` Alexandre Belloni
2026-10-13 13:16 ` [PATCH v2 31/53] mfd: ioc3: Add support for IOC4 Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 32/53] MIPS: SGI-IP27: dispatch the early console between IOC3 and IOC4 Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 33/53] MIPS: SGI-IP27: add L1 system controller support Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 34/53] MIPS: SGI-IP27: wire the L1 into reset and the Ethernet address Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 35/53] MIPS: PCI: xtalk-bridge: take the board part number from the L1 Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 36/53] mfd: ioc3: Add IP34 system-board entry to ioc3_infos[] Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 37/53] mfd: ioc3: Cross the serial IRQs on the Origin 300 IO8 Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 38/53] net: ethernet: sgi: ioc3-eth: fall back to the platform MAC address Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 39/53] MIPS: SGI-IP27: don't register a w1 master on an XBridge or PIC Imre Kaloz
2026-10-13 13:17 ` [PATCH v2 40/53] MIPS: SGI-IP27: report a Bedrock machine as SGI IP35 Imre Kaloz
2026-10-13 13:17 ` [PATCH v2 41/53] MIPS: SGI-IP27: identify the machine by the L1 brick type Imre Kaloz
2026-10-13 13:17 ` [PATCH v2 42/53] MIPS: SGI-IP27: register the Odyssey graphics widget Imre Kaloz
2026-10-13 13:17 ` [PATCH v2 43/53] MIPS: SGI-IP27: take the console from the KLCONFIG header on IP35 Imre Kaloz
2026-10-13 13:17 ` [PATCH v2 44/53] MIPS: SGI-IP27: give each CPU its own topology package id Imre Kaloz
2026-10-13 13:17 ` [PATCH v2 45/53] ata: add pata_sgiioc4 driver for the SGI IOC4 ATA/ATAPI controller Imre Kaloz
2026-10-13 13:17 ` [PATCH v2 46/53] mfd: ioc3: Add IOC4 ATA/ATAPI cell Imre Kaloz
2026-10-13 13:17 ` [PATCH v2 47/53] MAINTAINERS: add an entry for the SGI IOC4 ATA driver Imre Kaloz
2026-10-13 13:25 ` Damien Le Moal
2026-10-13 13:38 ` Imre Kaloz
2026-10-13 15:13 ` Damien Le Moal [this message]
2026-10-13 13:17 ` [PATCH v2 48/53] MIPS: ip27_defconfig: update for the onboard hardware Imre Kaloz
2026-10-13 13:17 ` [PATCH v2 49/53] MIPS: ip27_defconfig: enable pata_sgiioc4 and the DVD-ROM path Imre Kaloz
2026-10-13 13:17 ` [PATCH v2 50/53] MIPS: SGI-IP27: add L1 front-panel LED and display requests Imre Kaloz
2026-10-13 13:17 ` [PATCH v2 51/53] leds: Add driver for the SGI Fuel and Tezro front-panel LEDs Imre Kaloz
2026-10-13 13:17 ` [PATCH v2 52/53] MIPS: SGI-IP27: show the OS state on the Fuel and Tezro front panels Imre Kaloz
2026-10-13 13:17 ` [PATCH v2 53/53] MIPS: ip27_defconfig: enable the Fuel and Tezro front-panel LEDs Imre Kaloz
2026-10-13 13:35 ` [PATCH v2 00/53] MIPS: SGI-IP27: add support for the IP35 (Bedrock hub) machines Niklas Cassel
2026-10-13 14:25 ` Imre Kaloz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d303c874-239b-42ec-b3b5-ff3f6f6f7a31@kernel.org \
--to=dlemoal@kernel.org \
--cc=cassel@kernel.org \
--cc=kaloz@kernel.org \
--cc=lee@kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®