Re: [PATCH v7 1/3] dt-bindings: i3c: Add support for Qualcomm I3C controller

[Mukesh Savaliya <mukesh.savaliya@oss.qualcomm.com>]

Apologies for the additional email. I missed including the cover letter 
with this series.

Please ignore this series without the cover letter. I have resent the 
complete series with the cover letter included.

Sorry for the inconvenience.

On 11/4/2026 4:46 PM, Mukesh Kumar Savaliya wrote:
> Add device tree bindings for the Qualcomm GENI-based I3C controller.
> 
> The controller supports I3C SDR transfers in mixed-bus mode with both I2C
> and I3C target devices present on the same bus. The binding describes the
> I3C controller instance along with its associated In-Band Interrupt (IBI)
> controller used for handling I3C target IBI events.
> 
> Document the required resources, interrupts, clocks, and dependencies
> needed to represent the hardware in device tree.
> 
> Signed-off-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>
> ---
>   .../bindings/i3c/qcom,geni-i3c.yaml           | 115 ++++++++++++++++++
>   1 file changed, 115 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/i3c/qcom,geni-i3c.yaml
> 
> diff --git a/Documentation/devicetree/bindings/i3c/qcom,geni-i3c.yaml b/Documentation/devicetree/bindings/i3c/qcom,geni-i3c.yaml
> new file mode 100644
> index 000000000000..bab89aeee23f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i3c/qcom,geni-i3c.yaml
> @@ -0,0 +1,115 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i3c/qcom,geni-i3c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Geni based QUP I3C Controller
> +
> +maintainers:
> +  - Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>
> +
> +description:
> +  Qualcomm GENI-based I3C controller implementing an MIPI I3C bus master.
> +  The controller supports SDR transfers in mixed bus mode with both I2C and
> +  I3C target devices present on the same bus.
> +
> +  The controller consists of a GENI Serial Engine (SE) responsible for I3C
> +  bus transactions and an associated dedicated IBI controller(IBI_C) block
> +  used for Hot-Join, In-Band Interrupt (IBI) handling and management of GPII
> +  resources associated with the I3C controller.
> +
> +  I3C controller nodes must be child nodes of a GENI-based Qualcomm Universal
> +  Peripheral(QUP) wrapper. Refer to the GENI QUP wrapper binding described in
> +  Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
> +
> +allOf:
> +  - $ref: i3c.yaml#
> +  - $ref: /schemas/soc/qcom/qcom,se-common-props.yaml#
> +
> +properties:
> +  compatible:
> +    const: qcom,geni-i3c
> +
> +  reg:
> +    items:
> +      - description: SE (Serial Engine) register address space
> +      - description: IBI controller (IBI_C) register address space
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: se
> +
> +  interrupts:
> +    items:
> +      - description: Core Serial Engine (SE) IRQ
> +      - description: IBI controller (IBI_C) manager IRQ
> +      - description: IBI controller (IBI_C) GPII IRQ
> +
> +  interconnects:
> +    minItems: 2
> +    maxItems: 3
> +
> +  interconnect-names:
> +    minItems: 2
> +    items:
> +      - const: qup-core
> +      - const: qup-config
> +      - const: qup-memory
> +
> +  pinctrl-names:
> +    minItems: 1
> +    items:
> +      - const: default
> +      - const: sleep
> +
> +  dmas:
> +    maxItems: 2
> +
> +  dma-names:
> +    items:
> +      - const: tx
> +      - const: rx
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - interconnects
> +  - interconnect-names
> +  - pinctrl-0
> +  - pinctrl-1
> +  - pinctrl-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
> +    #include <dt-bindings/interconnect/qcom,kaanapali-rpmh.h>
> +
> +    i3c@884000 {
> +        compatible = "qcom,geni-i3c";
> +        reg = <0x00884000 0x4000>,
> +              <0x008c0000 0x10000>;
> +        clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
> +        clock-names = "se";
> +        interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>;
> +        interconnects = <&clk_virt MASTER_QUP_CORE_2 &clk_virt SLAVE_QUP_CORE_2>,
> +                        <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_2>,
> +                        <&aggre2_noc MASTER_QUP_2 &mc_virt SLAVE_EBI1>;
> +        interconnect-names = "qup-core", "qup-config", "qup-memory";
> +        pinctrl-0 = <&qup_i3c1_data_clk>;
> +        pinctrl-1 = <&qup_i3c1_data_clk_sleep>;
> +        pinctrl-names = "default", "sleep";
> +        #address-cells = <3>;
> +        #size-cells = <0>;
> +    };
> +...