mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Marek Vasut <marex@nabladev.com>
To: Francesco Dolcini <francesco@dolcini.it>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>,
	linux-arm-kernel@lists.infradead.org,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	devicetree@vger.kernel.org, imx@lists.linux.dev,
	kernel@dh-electronics.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] ARM: dts: imx6ull-dhcor-maveo-box: Remove unused SPI device
Date: Wed, 21 Oct 2026 20:55:39 +0200	[thread overview]
Message-ID: <d4b9c444-a848-4b4f-9273-1c832db45fc8@nabladev.com> (raw)
In-Reply-To: <20261021183704.GA1116319@francesco-nb>

On 10/21/26 8:37 PM, Francesco Dolcini wrote:
> On Wed, Oct 21, 2026 at 07:19:30PM +0200, Marek Vasut wrote:
>> On 10/21/26 3:44 PM, Christoph Niedermaier wrote:
>>> On the maveo box, the SPI pins are connected to connector X10,
>>> but no device is connected. The device "dhcom-board" was used
>>> only to test the hardware, but was not removed afterward. So
>>> remove this device to accurately represent the current hardware
>>> configuration here.
>>>
>>> Fixes: 145e2732a5e9 ("ARM: dts: imx6ull-dhcor: Add Marantec maveo box")
>>> Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
>>> ---
>>> Cc: Rob Herring <robh@kernel.org>
>>> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
>>> Cc: Conor Dooley <conor+dt@kernel.org>
>>> Cc: Frank Li <Frank.Li@nxp.com>
>>> Cc: Sascha Hauer <s.hauer@pengutronix.de>
>>> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
>>> Cc: Fabio Estevam <festevam@gmail.com>
>>> Cc: Marek Vasut <marex@nabladev.com>
>>> Cc: devicetree@vger.kernel.org
>>> Cc: imx@lists.linux.dev
>>> Cc: kernel@dh-electronics.com
>>> Cc: linux-kernel@vger.kernel.org
>>> ---
>>>    arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts | 8 --------
>>>    1 file changed, 8 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
>>> index 047f7b2d8526..eb0b91040110 100644
>>> --- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
>>> +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
>>> @@ -60,14 +60,6 @@ &ecspi4 {
>>>    	pinctrl-0 = <&pinctrl_ecspi4>;
>>>    	pinctrl-names = "default";
>>>    	status = "okay";
>>
>> Drop "status = "okay"" too , since this controller will be unused ?
> 
> you can instantiate a new device on the SPI bus from userspace. up to
> you, but if I was a user I would appreciate to have it enabled.
Good point -- Christoph, is this the (use)case here , can the user do that?

      reply	other threads:[~2026-10-22  6:49 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-21 13:44 Christoph Niedermaier
2026-10-21 13:44 ` [PATCH 2/2] ARM: dts: imx6ull-dhcor-maveo-box: Correct PCB number Christoph Niedermaier
2026-10-21 17:20   ` Marek Vasut
2026-10-21 17:19 ` [PATCH 1/2] ARM: dts: imx6ull-dhcor-maveo-box: Remove unused SPI device Marek Vasut
2026-10-21 18:37   ` Francesco Dolcini
2026-10-21 18:55     ` Marek Vasut [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d4b9c444-a848-4b4f-9273-1c832db45fc8@nabladev.com \
    --to=marex@nabladev.com \
    --cc=Frank.Li@nxp.com \
    --cc=cniedermaier@dh-electronics.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=francesco@dolcini.it \
    --cc=imx@lists.linux.dev \
    --cc=kernel@dh-electronics.com \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®