Re: [PATCH v8 2/2] memory: mtk-smi: mt8188: Add SMI reset and clamp for MT8188

["Friday Yang (杨阳)" <Friday.Yang@mediatek.com>]

On Thu, 2025-07-24 at 09:08 +0200, Krzysztof Kozlowski wrote:
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> 
> 
> On 24/07/2025 03:49, Friday Yang (杨阳) wrote:
> > On Thu, 2025-06-12 at 17:16 +0200, Krzysztof Kozlowski wrote:
> > > External email : Please do not click links or open attachments
> > > until
> > > you have verified the sender or the content.
> > > 
> > > 
> > > On 21/05/2025 08:33, Friday Yang wrote:
> > > > From: "Friday Yang" <friday.yang@mediatek.com>
> > > > 
> > > > To prevent handling glitch signals during MTCMOS on/off
> > > > transitions,
> > > > SMI requires clamp and reset operations. Parse the reset
> > > > settings
> > > > for
> > > > SMI LARBs and the clamp settings for the SMI Sub-Common.
> > > > Register
> > > > genpd callback for the SMI LARBs located in image, camera and
> > > > IPE
> > > > subsystems, and apply reset and clamp operations within the
> > > > callback.
> > > > 
> > > > Signed-off-by: Friday Yang <friday.yang@mediatek.com>
> > > > Reviewed-by: AngeloGioacchino Del Regno <
> > > > angelogioacchino.delregno@collabora.com>
> > > > Acked-by: Rob Herring <robh@kernel.org>
> > > 
> > > You did not respond to previous review. Sending the same while
> > > ignoring
> > > previous review is obvious NAK.
> > > 
> > 
> > Apologies for missing the message. In the v6 patch, I replaced
> > 'pm_runtime_enable' with 'devm_pm_runtime_enable'. You pointed out
> > that
> > this change might alter the cleanup order and potentially introduce
> > errors.
> > 
> > v6:
> > 
https://lore.kernel.org/lkml/20250408033206.12176-3-friday.yang@mediatek.com/
> > 
> > Therefore, in the v7 patch, I reverted this change and continued
> > using
> > 'pm_runtime_enable' in the SMI driver. However, I did not include a
> > clear description of the changes between v6 and v7 in the cover
> > letter.
> > 
> > v7:
> > 
https://lore.kernel.org/lkml/9f01a9a4-89b2-4bfc-97cd-827be989ef16@kernel.org/
> > 
> > In the v8 patch, I have added a description in the cover letter.
> > This series just add functions for SMI clamp and not change
> > anything
> > else. Is this acceptable to you?
> 
> That was month ago. Nothing form this thread is in my memory, nothing
> is
> in the mailbox. There is no cover letter to find anymore.
> 
> Anyway, you did not respond to the actual comment and you send the
> same.
> Now you respond... to something else still ignoring the comment about
> fake tags.
> 
> I will not be wasting more time on this patchset.
> 

Changes v7:
- Remove the 'devm_pm_runtime_enable' change.

Above is the tag you ask. You are right, the 'devm_pm_runtime_enable'
tag I mentionded in the patchset v6 is truly a fake tag. So please
ignore this tag. What I intended to explain here was that I decided not
to use 'devm_pm_runtime_enable' to replace 'pm_runtime_enable'
functions. Unfortunately, the fake tag didn't explain this clearly in
the changelog, which was my fault. To address this, I updated patchset
v8 to include an explanation.

In patchset v6, I replaced 'pm_runtime_enable' with
'devm_pm_runtime_enable'. However, in patchset v8, I reverted this
change and included the reason for this decision in the changelog.
Apologize for the delay and the trouble again.


> Best regards,
> Krzysztof