[PATCH] x86/nmi: Enable panic() when NMI handler runs too long

[PATCH] x86/nmi: Enable panic() when NMI handler runs too long

[Paul E. McKenney]

Firmware, device-driver, and configuration issues can result in
long-running NMI handlers, for example, nmi_cpu_backtrace_handler()
running for more than two seconds, and with no console issues.  In this
case, this is not the fault of nmi_cpu_backtrace_handler(), but it is
the first symptom of the underlying problem.  These NMI handlers result
in various other problems, including CSD-lock warnings, clocksource
watchdog false positives, scheduler frequency invariance wobbliness,
systemd excessive-CPU complaints, and even the occasional RCU CPU
stall warning.  Eventually, the automation will take the system out of
service, but with quite a bit of noise obscuring the underlying issue,
and thus confusing both automation and human beings.

Therefore, provide a toolong_nmi_panic __setup() parameter that makes
nmi_check_duration() invoke nmi_panic() if the just-completed NMI handler
ran for more than the specified number of milliseconds.  This parameter
defaults to zero, which disables the nmi_panic().  As in, by default
you get the same behavior that you get today.

[ paulmck: Apply kernel test robot feedback. ]

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <x86@kernel.org>

diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 3c9f60d6ca5a..aae725477468 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -85,6 +85,7 @@ static DEFINE_PER_CPU(struct nmi_stats, nmi_stats);
 static int ignore_nmis __read_mostly;
 
 int unknown_nmi_panic;
+static unsigned long toolong_nmi_panic;
 int panic_on_unrecovered_nmi;
 int panic_on_io_nmi;
 
@@ -101,6 +102,20 @@ static int __init setup_unknown_nmi_panic(char *str)
 }
 __setup("unknown_nmi_panic", setup_unknown_nmi_panic);
 
+static int __init setup_toolong_nmi_panic(char *str)
+{
+	int ret;
+
+	ret = kstrtoul(str, 0, &toolong_nmi_panic);
+	if (ret) {
+		pr_alert("%s: %s on '%s', disabling to zero.\n",
+			 __func__, ret == -ERANGE ? "Overflow" : "Parse error", str);
+		toolong_nmi_panic = 0;
+	}
+	return 1;
+}
+__setup("toolong_nmi_panic=", setup_toolong_nmi_panic);
+
 static u64 nmi_longest_ns = 1 * NSEC_PER_MSEC;
 
 static int __init nmi_warning_debugfs(void)
@@ -111,7 +126,7 @@ static int __init nmi_warning_debugfs(void)
 }
 fs_initcall(nmi_warning_debugfs);
 
-static void nmi_check_duration(struct nmiaction *action, u64 duration)
+static void nmi_check_duration(struct nmiaction *action, u64 duration, struct pt_regs *regs)
 {
 	int remainder_ns, decimal_msecs;
 
@@ -126,6 +141,8 @@ static void nmi_check_duration(struct nmiaction *action, u64 duration)
 
 	pr_info_ratelimited("INFO: NMI handler (%ps) took too long to run: %lld.%03d msecs\n",
 			    action->handler, duration, decimal_msecs);
+	if (toolong_nmi_panic && duration >= toolong_nmi_panic)
+		nmi_panic(regs, "Panic per toolong_nmi_panic");
 }
 
 static int nmi_handle(unsigned int type, struct pt_regs *regs)
@@ -165,7 +182,7 @@ static int nmi_handle(unsigned int type, struct pt_regs *regs)
 		delta = sched_clock() - delta;
 		trace_nmi_handler(a->handler, (int)delta, thishandled);
 
-		nmi_check_duration(a, delta);
+		nmi_check_duration(a, delta, regs);
 	}
 
 	rcu_read_unlock();

[PATCH v2] x86/nmi: Enable panic() when NMI handler runs too long

[Paul E. McKenney]

Firmware, device-driver, and configuration issues can result in
long-running NMI handlers, for example, nmi_cpu_backtrace_handler()
running for more than two seconds, and with no console issues.  In this
case, this is not the fault of nmi_cpu_backtrace_handler(), but it is
the first symptom of the underlying problem.  These NMI handlers result
in various other problems, including CSD-lock warnings, clocksource
watchdog false positives, scheduler frequency invariance wobbliness,
systemd excessive-CPU complaints, and even the occasional RCU CPU
stall warning.  Eventually, the automation will take the system out of
service, but with quite a bit of noise obscuring the underlying issue,
and thus confusing both automation and human beings.

Therefore, provide a toolong_nmi_panic __setup() parameter that makes
nmi_check_duration() invoke nmi_panic() if the just-completed NMI handler
ran for more than the specified number of milliseconds.  This parameter
defaults to zero, which disables the nmi_panic().  As in, by default
you get the same behavior that you get today.

[ paulmck: Apply kernel test robot feedback, add documentation. ]

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <x86@kernel.org>

---
 Documentation/admin-guide/kernel-parameters.txt |    6 ++++++
 arch/x86/kernel/nmi.c                           |   21 +++++++++++++++++++--
 2 files changed, 25 insertions(+), 2 deletions(-)

Changes since v1:

o	Add documentation of new toolong_nmi_panic kernel boot parameter.

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 68647ff4bdd24..e7dbd5bf48fc9 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -7642,6 +7642,12 @@ Kernel parameters
 			Format: {ipi}
 			ipi: switch to IPI-based TLB flushing
 
+	toolong_nmi_panic= [X86]
+			Cause a panic upon return from an NMI handler
+			that took longer than the specified number
+			of milliseconds.  The default value of zero
+			suppresses these panics.
+
 	topology=	[S390,EARLY]
 			Format: {off | on}
 			Specify if the kernel should make use of the cpu
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 3c9f60d6ca5a7..aae7254774680 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -85,6 +85,7 @@ static DEFINE_PER_CPU(struct nmi_stats, nmi_stats);
 static int ignore_nmis __read_mostly;
 
 int unknown_nmi_panic;
+static unsigned long toolong_nmi_panic;
 int panic_on_unrecovered_nmi;
 int panic_on_io_nmi;
 
@@ -101,6 +102,20 @@ static int __init setup_unknown_nmi_panic(char *str)
 }
 __setup("unknown_nmi_panic", setup_unknown_nmi_panic);
 
+static int __init setup_toolong_nmi_panic(char *str)
+{
+	int ret;
+
+	ret = kstrtoul(str, 0, &toolong_nmi_panic);
+	if (ret) {
+		pr_alert("%s: %s on '%s', disabling to zero.\n",
+			 __func__, ret == -ERANGE ? "Overflow" : "Parse error", str);
+		toolong_nmi_panic = 0;
+	}
+	return 1;
+}
+__setup("toolong_nmi_panic=", setup_toolong_nmi_panic);
+
 static u64 nmi_longest_ns = 1 * NSEC_PER_MSEC;
 
 static int __init nmi_warning_debugfs(void)
@@ -111,7 +126,7 @@ static int __init nmi_warning_debugfs(void)
 }
 fs_initcall(nmi_warning_debugfs);
 
-static void nmi_check_duration(struct nmiaction *action, u64 duration)
+static void nmi_check_duration(struct nmiaction *action, u64 duration, struct pt_regs *regs)
 {
 	int remainder_ns, decimal_msecs;
 
@@ -126,6 +141,8 @@ static void nmi_check_duration(struct nmiaction *action, u64 duration)
 
 	pr_info_ratelimited("INFO: NMI handler (%ps) took too long to run: %lld.%03d msecs\n",
 			    action->handler, duration, decimal_msecs);
+	if (toolong_nmi_panic && duration >= toolong_nmi_panic)
+		nmi_panic(regs, "Panic per toolong_nmi_panic");
 }
 
 static int nmi_handle(unsigned int type, struct pt_regs *regs)
@@ -165,7 +182,7 @@ static int nmi_handle(unsigned int type, struct pt_regs *regs)
 		delta = sched_clock() - delta;
 		trace_nmi_handler(a->handler, (int)delta, thishandled);
 
-		nmi_check_duration(a, delta);
+		nmi_check_duration(a, delta, regs);
 	}
 
 	rcu_read_unlock();

Re: [PATCH v2] x86/nmi: Enable panic() when NMI handler runs too long

[Borislav Petkov]

On Mon, Oct 19, 2026 at 01:44:30PM -0700, Paul E. McKenney wrote:
> Firmware, device-driver, and configuration issues can result in
> long-running NMI handlers, for example, nmi_cpu_backtrace_handler()
> running for more than two seconds, and with no console issues.  In this
> case, this is not the fault of nmi_cpu_backtrace_handler(), but it is
> the first symptom of the underlying problem.  These NMI handlers result
> in various other problems, including CSD-lock warnings, clocksource
> watchdog false positives, scheduler frequency invariance wobbliness,
> systemd excessive-CPU complaints, and even the occasional RCU CPU
> stall warning.  Eventually, the automation will take the system out of
> service, but with quite a bit of noise obscuring the underlying issue,
> and thus confusing both automation and human beings.
> 
> Therefore, provide a toolong_nmi_panic __setup() parameter that makes
> nmi_check_duration() invoke nmi_panic() if the just-completed NMI handler
> ran for more than the specified number of milliseconds.  This parameter
> defaults to zero, which disables the nmi_panic().  As in, by default
> you get the same behavior that you get today.
> 
> [ paulmck: Apply kernel test robot feedback, add documentation. ]
> 
> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
> Cc: Thomas Gleixner <tglx@kernel.org>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: Borislav Petkov <bp@alien8.de>
> Cc: Dave Hansen <dave.hansen@linux.intel.com>
> Cc: "H. Peter Anvin" <hpa@zytor.com>
> Cc: <x86@kernel.org>
> 
> ---
>  Documentation/admin-guide/kernel-parameters.txt |    6 ++++++
>  arch/x86/kernel/nmi.c                           |   21 +++++++++++++++++++--
>  2 files changed, 25 insertions(+), 2 deletions(-)
> 
> Changes since v1:
> 
> o	Add documentation of new toolong_nmi_panic kernel boot parameter.
> 
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 68647ff4bdd24..e7dbd5bf48fc9 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -7642,6 +7642,12 @@ Kernel parameters
>  			Format: {ipi}
>  			ipi: switch to IPI-based TLB flushing
>  
> +	toolong_nmi_panic= [X86]
> +			Cause a panic upon return from an NMI handler
> +			that took longer than the specified number
> +			of milliseconds.  The default value of zero
> +			suppresses these panics.

Cause a panic after an NMI?!

Oh boy, is this trying to solve a Meta fleet problem and you're thinking, why
not upstream it too?

Because I fail to use the usefulness of this...

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette

Re: [PATCH v2] x86/nmi: Enable panic() when NMI handler runs too long

[Paul E. McKenney]

On Mon, Oct 19, 2026 at 09:52:47PM -0700, Borislav Petkov wrote:
> On Mon, Oct 19, 2026 at 01:44:30PM -0700, Paul E. McKenney wrote:
> > Firmware, device-driver, and configuration issues can result in
> > long-running NMI handlers, for example, nmi_cpu_backtrace_handler()
> > running for more than two seconds, and with no console issues.  In this
> > case, this is not the fault of nmi_cpu_backtrace_handler(), but it is
> > the first symptom of the underlying problem.  These NMI handlers result
> > in various other problems, including CSD-lock warnings, clocksource
> > watchdog false positives, scheduler frequency invariance wobbliness,
> > systemd excessive-CPU complaints, and even the occasional RCU CPU
> > stall warning.  Eventually, the automation will take the system out of
> > service, but with quite a bit of noise obscuring the underlying issue,
> > and thus confusing both automation and human beings.
> > 
> > Therefore, provide a toolong_nmi_panic __setup() parameter that makes
> > nmi_check_duration() invoke nmi_panic() if the just-completed NMI handler
> > ran for more than the specified number of milliseconds.  This parameter
> > defaults to zero, which disables the nmi_panic().  As in, by default
> > you get the same behavior that you get today.
> > 
> > [ paulmck: Apply kernel test robot feedback, add documentation. ]
> > 
> > Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
> > Cc: Thomas Gleixner <tglx@kernel.org>
> > Cc: Ingo Molnar <mingo@redhat.com>
> > Cc: Borislav Petkov <bp@alien8.de>
> > Cc: Dave Hansen <dave.hansen@linux.intel.com>
> > Cc: "H. Peter Anvin" <hpa@zytor.com>
> > Cc: <x86@kernel.org>
> > 
> > ---
> >  Documentation/admin-guide/kernel-parameters.txt |    6 ++++++
> >  arch/x86/kernel/nmi.c                           |   21 +++++++++++++++++++--
> >  2 files changed, 25 insertions(+), 2 deletions(-)
> > 
> > Changes since v1:
> > 
> > o	Add documentation of new toolong_nmi_panic kernel boot parameter.
> > 
> > diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> > index 68647ff4bdd24..e7dbd5bf48fc9 100644
> > --- a/Documentation/admin-guide/kernel-parameters.txt
> > +++ b/Documentation/admin-guide/kernel-parameters.txt
> > @@ -7642,6 +7642,12 @@ Kernel parameters
> >  			Format: {ipi}
> >  			ipi: switch to IPI-based TLB flushing
> >  
> > +	toolong_nmi_panic= [X86]
> > +			Cause a panic upon return from an NMI handler
> > +			that took longer than the specified number
> > +			of milliseconds.  The default value of zero
> > +			suppresses these panics.
> 
> Cause a panic after an NMI?!

When the NMI handler runs for more than ten seconds, life is hard anyway.
And no, these were not bugs in the several affected NMI handlers themselves.

> Oh boy, is this trying to solve a Meta fleet problem and you're thinking, why
> not upstream it too?
> 
> Because I fail to use the usefulness of this...

I might be wrong, but I doubt that Meta's fleet is the only place where
such bugs appear.  ;-)

							Thanx, Paul

Re: [PATCH v2] x86/nmi: Enable panic() when NMI handler runs too long

[Dave Hansen]

On 10/20/26 09:15, Paul E. McKenney wrote:
>>> +	toolong_nmi_panic= [X86]
>>> +			Cause a panic upon return from an NMI handler
>>> +			that took longer than the specified number
>>> +			of milliseconds.  The default value of zero
>>> +			suppresses these panics.
>> Cause a panic after an NMI?!
> When the NMI handler runs for more than ten seconds, life is hard anyway.
> And no, these were not bugs in the several affected NMI handlers themselves.
> 
>> Oh boy, is this trying to solve a Meta fleet problem and you're thinking, why
>> not upstream it too?
>>
>> Because I fail to use the usefulness of this...
> I might be wrong, but I doubt that Meta's fleet is the only place where
> such bugs appear.  😉

Yeah, I once upon a time had a bunch of problems with NMIs taking
forever to run. In my case, it was some actually wonky firmware, but
differentiating the broken firmware from NMI handlers just being slow is
what motivated the existing "took too long to run" message next to which
you added the nmi_panic().

That said, I'd much prefer something more generic than something
NMI-specific.

Would the systems that set toolong_nmi_panic=1 also set panic_on_warn=1?
Are there any other "extra" panics that these systems also find useful?

I'm kinda curious if, for instance:

	hung_task_panic=1
or
	softlockup_panic=1

would also panic() these systems.