Re: [PATCH 11/17] phy: qcom: edp: Add Nord PHY power-on and reset state-machine callbacks

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 9/11/26 5:36 PM, Nabige Aala wrote:
> From: Ritesh Kumar <ritesh.kumar@oss.qualcomm.com>
> 
> Nord relocates the QSERDES COM CMN_STATUS and C_READY_STATUS registers
> so the generic sequences cannot be reused.  Add
> qcom_edp_phy_power_on_nord() which powers down all lanes and polls
> CMN_STATUS_NORD (0x1d0), and qcom_edp_phy_com_resetsm_cntrl_nord()
> which triggers the reset SM and polls C_READY_STATUS_NORD (0x1f8).
> 
> Signed-off-by: Ritesh Kumar <ritesh.kumar@oss.qualcomm.com>
> Signed-off-by: Nabige Aala <nabige.aala@oss.qualcomm.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-edp.c | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
> index 64878398f43c..6cac4b55b66f 100644
> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
> @@ -1612,6 +1612,31 @@ static const struct qcom_edp_swing_pre_emph_cfg nord_dp_swing_pre_emph_cfg = {
>  };
>  
>  
> +static int qcom_edp_phy_power_on_nord(const struct qcom_edp *edp)

This commit introduces compile warnings (-Wunused-function)
> +{
> +	u32 val;
> +
> +	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> +	       DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
> +	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> +	       edp->edp + DP_PHY_PD_CTL);
> +	writel(0xfc, edp->edp + DP_PHY_MODE);
> +
> +	return readl_poll_timeout(edp->pll + DP_QSERDES_V8_COM_CMN_STATUS_NORD,
> +				 val, val & BIT(7), 5, 200);
> +}
> +
> +static int qcom_edp_phy_com_resetsm_cntrl_nord(const struct qcom_edp *edp)
> +{
> +	u32 val;
> +
> +	writel(0x20, edp->pll + DP_QSERDES_V8_COM_RESETSM_CNTRL);
> +
> +	return readl_poll_timeout(edp->pll + DP_QSERDES_V8_COM_C_READY_STATUS_NORD,
> +				 val, val & BIT(0), 500, 10000);
> +}
> +
> +

Double \n

Konrad