* [PATCH 1/2] remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
@ 2022-11-11 11:54 Luca Weiss
2022-11-11 11:54 ` [PATCH 2/2] remoteproc: qcom_q6v5_pas: detach power domains on remove Luca Weiss
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Luca Weiss @ 2022-11-11 11:54 UTC (permalink / raw)
To: linux-arm-msm
Cc: ~postmarketos/upstreaming, phone-devel, Luca Weiss, Andy Gross,
Bjorn Andersson, Konrad Dybcio, Mathieu Poirier, Siddharth Gupta,
Rishabh Bhatnagar, Sibi Sankar, linux-remoteproc, linux-kernel
Leaving wakeup enabled during probe fail (-EPROBE_DEFER) or remove makes
the subsequent probe fail.
[ 3.749454] remoteproc remoteproc0: releasing 3000000.remoteproc
[ 3.752949] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17
[ 3.878935] remoteproc remoteproc0: releasing 4080000.remoteproc
[ 3.887602] qcom_q6v5_pas: probe of 4080000.remoteproc failed with error -17
[ 4.319552] remoteproc remoteproc0: releasing 8300000.remoteproc
[ 4.332716] qcom_q6v5_pas: probe of 8300000.remoteproc failed with error -17
Fix this by disabling wakeup in both cases so the driver can properly
probe on the next try.
Fixes: a781e5aa5911 ("remoteproc: core: Prevent system suspend during remoteproc recovery")
Fixes: dc86c129b4fb ("remoteproc: qcom: pas: Mark devices as wakeup capable")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
drivers/remoteproc/qcom_q6v5_pas.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 6afd0941e552..d830bf13c32c 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -557,6 +557,7 @@ static int adsp_probe(struct platform_device *pdev)
adsp_pds_detach(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
free_rproc:
rproc_free(rproc);
+ device_init_wakeup(adsp->dev, false);
return ret;
}
@@ -573,6 +574,7 @@ static int adsp_remove(struct platform_device *pdev)
qcom_remove_smd_subdev(adsp->rproc, &adsp->smd_subdev);
qcom_remove_ssr_subdev(adsp->rproc, &adsp->ssr_subdev);
rproc_free(adsp->rproc);
+ device_init_wakeup(adsp->dev, false);
return 0;
}
--
2.38.1
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH 2/2] remoteproc: qcom_q6v5_pas: detach power domains on remove
2022-11-11 11:54 [PATCH 1/2] remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove Luca Weiss
@ 2022-11-11 11:54 ` Luca Weiss
2022-11-16 9:33 ` Sibi Sankar
2022-11-17 10:40 ` Mukesh Ojha
2022-11-16 9:55 ` [PATCH 1/2] remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove Sibi Sankar
2022-11-17 10:36 ` Mukesh Ojha
2 siblings, 2 replies; 6+ messages in thread
From: Luca Weiss @ 2022-11-11 11:54 UTC (permalink / raw)
To: linux-arm-msm
Cc: ~postmarketos/upstreaming, phone-devel, Luca Weiss, Andy Gross,
Bjorn Andersson, Konrad Dybcio, Mathieu Poirier, Sibi Sankar,
linux-remoteproc, linux-kernel
We need to detach from the power domains also on remove, not just on
probe fail so a subsequent probe works as expected.
Otherwise the following error appears on re-probe:
[ 29.452005] sysfs: cannot create duplicate filename '/devices/genpd:0:3000000.remoteproc'
[ 29.477121] CPU: 1 PID: 483 Comm: sh Tainted: G W 6.1.0-rc4-00075-g71a113770bda #78
[ 29.510319] Hardware name: Fairphone 4 (DT)
[ 29.538335] Call trace:
[ 29.564470] dump_backtrace.part.0+0xe0/0xf0
[ 29.592602] show_stack+0x18/0x30
[ 29.619616] dump_stack_lvl+0x64/0x80
[ 29.646834] dump_stack+0x18/0x34
[ 29.673541] sysfs_warn_dup+0x60/0x7c
[ 29.700592] sysfs_create_dir_ns+0xec/0x110
[ 29.728057] kobject_add_internal+0xb8/0x374
[ 29.755530] kobject_add+0x9c/0x104
[ 29.782072] device_add+0xbc/0x8a0
[ 29.808445] device_register+0x20/0x30
[ 29.835175] genpd_dev_pm_attach_by_id+0xa4/0x190
[ 29.862851] genpd_dev_pm_attach_by_name+0x3c/0xb0
[ 29.890472] dev_pm_domain_attach_by_name+0x20/0x30
[ 29.918212] adsp_probe+0x278/0x580
[ 29.944384] platform_probe+0x68/0xc0
[ 29.970603] really_probe+0xbc/0x2dc
[ 29.996662] __driver_probe_device+0x78/0xe0
[ 30.023491] device_driver_attach+0x48/0xac
[ 30.050215] bind_store+0xb8/0x114
[ 30.075957] drv_attr_store+0x24/0x3c
[ 30.101874] sysfs_kf_write+0x44/0x54
[ 30.127751] kernfs_fop_write_iter+0x120/0x1f0
[ 30.154448] vfs_write+0x1ac/0x380
[ 30.179937] ksys_write+0x70/0x104
[ 30.205274] __arm64_sys_write+0x1c/0x2c
[ 30.231060] invoke_syscall+0x48/0x114
[ 30.256594] el0_svc_common.constprop.0+0x44/0xec
[ 30.283183] do_el0_svc+0x2c/0xd0
[ 30.308320] el0_svc+0x2c/0x84
[ 30.333059] el0t_64_sync_handler+0xf4/0x120
[ 30.359001] el0t_64_sync+0x18c/0x190
[ 30.384385] kobject_add_internal failed for genpd:0:3000000.remoteproc with -EEXIST, don't try to register things with the same name in the same directory.
[ 30.406029] remoteproc remoteproc0: releasing 3000000.remoteproc
[ 30.416064] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17
Fixes: 17ee2fb4e856 ("remoteproc: qcom: pas: Vote for active/proxy power domains")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
drivers/remoteproc/qcom_q6v5_pas.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index d830bf13c32c..747155c85085 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -573,6 +573,7 @@ static int adsp_remove(struct platform_device *pdev)
qcom_remove_sysmon_subdev(adsp->sysmon);
qcom_remove_smd_subdev(adsp->rproc, &adsp->smd_subdev);
qcom_remove_ssr_subdev(adsp->rproc, &adsp->ssr_subdev);
+ adsp_pds_detach(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
rproc_free(adsp->rproc);
device_init_wakeup(adsp->dev, false);
--
2.38.1
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH 2/2] remoteproc: qcom_q6v5_pas: detach power domains on remove
2022-11-11 11:54 ` [PATCH 2/2] remoteproc: qcom_q6v5_pas: detach power domains on remove Luca Weiss
@ 2022-11-16 9:33 ` Sibi Sankar
2022-11-17 10:40 ` Mukesh Ojha
1 sibling, 0 replies; 6+ messages in thread
From: Sibi Sankar @ 2022-11-16 9:33 UTC (permalink / raw)
To: Luca Weiss, linux-arm-msm
Cc: ~postmarketos/upstreaming, phone-devel, Andy Gross,
Bjorn Andersson, Konrad Dybcio, Mathieu Poirier, Sibi Sankar,
linux-remoteproc, linux-kernel
Hey Luca,
Thanks for the fix.
On 11/11/22 17:24, Luca Weiss wrote:
> We need to detach from the power domains also on remove, not just on
> probe fail so a subsequent probe works as expected.
>
> Otherwise the following error appears on re-probe:
>
> [ 29.452005] sysfs: cannot create duplicate filename '/devices/genpd:0:3000000.remoteproc'
> [ 29.477121] CPU: 1 PID: 483 Comm: sh Tainted: G W 6.1.0-rc4-00075-g71a113770bda #78
> [ 29.510319] Hardware name: Fairphone 4 (DT)
> [ 29.538335] Call trace:
> [ 29.564470] dump_backtrace.part.0+0xe0/0xf0
> [ 29.592602] show_stack+0x18/0x30
> [ 29.619616] dump_stack_lvl+0x64/0x80
> [ 29.646834] dump_stack+0x18/0x34
> [ 29.673541] sysfs_warn_dup+0x60/0x7c
> [ 29.700592] sysfs_create_dir_ns+0xec/0x110
> [ 29.728057] kobject_add_internal+0xb8/0x374
> [ 29.755530] kobject_add+0x9c/0x104
> [ 29.782072] device_add+0xbc/0x8a0
> [ 29.808445] device_register+0x20/0x30
> [ 29.835175] genpd_dev_pm_attach_by_id+0xa4/0x190
> [ 29.862851] genpd_dev_pm_attach_by_name+0x3c/0xb0
> [ 29.890472] dev_pm_domain_attach_by_name+0x20/0x30
> [ 29.918212] adsp_probe+0x278/0x580
> [ 29.944384] platform_probe+0x68/0xc0
> [ 29.970603] really_probe+0xbc/0x2dc
> [ 29.996662] __driver_probe_device+0x78/0xe0
> [ 30.023491] device_driver_attach+0x48/0xac
> [ 30.050215] bind_store+0xb8/0x114
> [ 30.075957] drv_attr_store+0x24/0x3c
> [ 30.101874] sysfs_kf_write+0x44/0x54
> [ 30.127751] kernfs_fop_write_iter+0x120/0x1f0
> [ 30.154448] vfs_write+0x1ac/0x380
> [ 30.179937] ksys_write+0x70/0x104
> [ 30.205274] __arm64_sys_write+0x1c/0x2c
> [ 30.231060] invoke_syscall+0x48/0x114
> [ 30.256594] el0_svc_common.constprop.0+0x44/0xec
> [ 30.283183] do_el0_svc+0x2c/0xd0
> [ 30.308320] el0_svc+0x2c/0x84
> [ 30.333059] el0t_64_sync_handler+0xf4/0x120
> [ 30.359001] el0t_64_sync+0x18c/0x190
> [ 30.384385] kobject_add_internal failed for genpd:0:3000000.remoteproc with -EEXIST, don't try to register things with the same name in the same directory.
> [ 30.406029] remoteproc remoteproc0: releasing 3000000.remoteproc
> [ 30.416064] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17
>
> Fixes: 17ee2fb4e856 ("remoteproc: qcom: pas: Vote for active/proxy power domains")
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
> ---
> drivers/remoteproc/qcom_q6v5_pas.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
> index d830bf13c32c..747155c85085 100644
> --- a/drivers/remoteproc/qcom_q6v5_pas.c
> +++ b/drivers/remoteproc/qcom_q6v5_pas.c
> @@ -573,6 +573,7 @@ static int adsp_remove(struct platform_device *pdev)
> qcom_remove_sysmon_subdev(adsp->sysmon);
> qcom_remove_smd_subdev(adsp->rproc, &adsp->smd_subdev);
> qcom_remove_ssr_subdev(adsp->rproc, &adsp->ssr_subdev);
> + adsp_pds_detach(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
> rproc_free(adsp->rproc);
> device_init_wakeup(adsp->dev, false);
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH 2/2] remoteproc: qcom_q6v5_pas: detach power domains on remove
2022-11-11 11:54 ` [PATCH 2/2] remoteproc: qcom_q6v5_pas: detach power domains on remove Luca Weiss
2022-11-16 9:33 ` Sibi Sankar
@ 2022-11-17 10:40 ` Mukesh Ojha
1 sibling, 0 replies; 6+ messages in thread
From: Mukesh Ojha @ 2022-11-17 10:40 UTC (permalink / raw)
To: Luca Weiss, linux-arm-msm
Cc: ~postmarketos/upstreaming, phone-devel, Andy Gross,
Bjorn Andersson, Konrad Dybcio, Mathieu Poirier, Sibi Sankar,
linux-remoteproc, linux-kernel
Hi,
On 11/11/2022 5:24 PM, Luca Weiss wrote:
> We need to detach from the power domains also on remove, not just on
> probe fail so a subsequent probe works as expected.
>
> Otherwise the following error appears on re-probe:
>
> [ 29.452005] sysfs: cannot create duplicate filename '/devices/genpd:0:3000000.remoteproc'
> [ 29.477121] CPU: 1 PID: 483 Comm: sh Tainted: G W 6.1.0-rc4-00075-g71a113770bda #78
> [ 29.510319] Hardware name: Fairphone 4 (DT)
> [ 29.538335] Call trace:
> [ 29.564470] dump_backtrace.part.0+0xe0/0xf0
> [ 29.592602] show_stack+0x18/0x30
> [ 29.619616] dump_stack_lvl+0x64/0x80
> [ 29.646834] dump_stack+0x18/0x34
> [ 29.673541] sysfs_warn_dup+0x60/0x7c
> [ 29.700592] sysfs_create_dir_ns+0xec/0x110
> [ 29.728057] kobject_add_internal+0xb8/0x374
> [ 29.755530] kobject_add+0x9c/0x104
> [ 29.782072] device_add+0xbc/0x8a0
> [ 29.808445] device_register+0x20/0x30
> [ 29.835175] genpd_dev_pm_attach_by_id+0xa4/0x190
> [ 29.862851] genpd_dev_pm_attach_by_name+0x3c/0xb0
> [ 29.890472] dev_pm_domain_attach_by_name+0x20/0x30
> [ 29.918212] adsp_probe+0x278/0x580
> [ 29.944384] platform_probe+0x68/0xc0
> [ 29.970603] really_probe+0xbc/0x2dc
> [ 29.996662] __driver_probe_device+0x78/0xe0
> [ 30.023491] device_driver_attach+0x48/0xac
> [ 30.050215] bind_store+0xb8/0x114
> [ 30.075957] drv_attr_store+0x24/0x3c
> [ 30.101874] sysfs_kf_write+0x44/0x54
> [ 30.127751] kernfs_fop_write_iter+0x120/0x1f0
> [ 30.154448] vfs_write+0x1ac/0x380
> [ 30.179937] ksys_write+0x70/0x104
> [ 30.205274] __arm64_sys_write+0x1c/0x2c
> [ 30.231060] invoke_syscall+0x48/0x114
> [ 30.256594] el0_svc_common.constprop.0+0x44/0xec
> [ 30.283183] do_el0_svc+0x2c/0xd0
> [ 30.308320] el0_svc+0x2c/0x84
> [ 30.333059] el0t_64_sync_handler+0xf4/0x120
> [ 30.359001] el0t_64_sync+0x18c/0x190
> [ 30.384385] kobject_add_internal failed for genpd:0:3000000.remoteproc with -EEXIST, don't try to register things with the same name in the same directory.
> [ 30.406029] remoteproc remoteproc0: releasing 3000000.remoteproc
> [ 30.416064] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17
>
> Fixes: 17ee2fb4e856 ("remoteproc: qcom: pas: Vote for active/proxy power domains")
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
LGTM.
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
-Mukesh
> ---
> drivers/remoteproc/qcom_q6v5_pas.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
> index d830bf13c32c..747155c85085 100644
> --- a/drivers/remoteproc/qcom_q6v5_pas.c
> +++ b/drivers/remoteproc/qcom_q6v5_pas.c
> @@ -573,6 +573,7 @@ static int adsp_remove(struct platform_device *pdev)
> qcom_remove_sysmon_subdev(adsp->sysmon);
> qcom_remove_smd_subdev(adsp->rproc, &adsp->smd_subdev);
> qcom_remove_ssr_subdev(adsp->rproc, &adsp->ssr_subdev);
> + adsp_pds_detach(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
> rproc_free(adsp->rproc);
> device_init_wakeup(adsp->dev, false);
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
2022-11-11 11:54 [PATCH 1/2] remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove Luca Weiss
2022-11-11 11:54 ` [PATCH 2/2] remoteproc: qcom_q6v5_pas: detach power domains on remove Luca Weiss
@ 2022-11-16 9:55 ` Sibi Sankar
2022-11-17 10:36 ` Mukesh Ojha
2 siblings, 0 replies; 6+ messages in thread
From: Sibi Sankar @ 2022-11-16 9:55 UTC (permalink / raw)
To: Luca Weiss, linux-arm-msm
Cc: ~postmarketos/upstreaming, phone-devel, Andy Gross,
Bjorn Andersson, Konrad Dybcio, Mathieu Poirier, Siddharth Gupta,
Rishabh Bhatnagar, linux-remoteproc, linux-kernel
Hey Luca,
Thanks for the patch.
On 11/11/22 17:24, Luca Weiss wrote:
> Leaving wakeup enabled during probe fail (-EPROBE_DEFER) or remove makes
> the subsequent probe fail.
>
> [ 3.749454] remoteproc remoteproc0: releasing 3000000.remoteproc
> [ 3.752949] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17
> [ 3.878935] remoteproc remoteproc0: releasing 4080000.remoteproc
> [ 3.887602] qcom_q6v5_pas: probe of 4080000.remoteproc failed with error -17
> [ 4.319552] remoteproc remoteproc0: releasing 8300000.remoteproc
> [ 4.332716] qcom_q6v5_pas: probe of 8300000.remoteproc failed with error -17
>
> Fix this by disabling wakeup in both cases so the driver can properly
> probe on the next try.
>
> Fixes: a781e5aa5911 ("remoteproc: core: Prevent system suspend during remoteproc recovery")
> Fixes: dc86c129b4fb ("remoteproc: qcom: pas: Mark devices as wakeup capable")
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
> drivers/remoteproc/qcom_q6v5_pas.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
> index 6afd0941e552..d830bf13c32c 100644
> --- a/drivers/remoteproc/qcom_q6v5_pas.c
> +++ b/drivers/remoteproc/qcom_q6v5_pas.c
> @@ -557,6 +557,7 @@ static int adsp_probe(struct platform_device *pdev)
> adsp_pds_detach(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
> free_rproc:
> rproc_free(rproc);
> + device_init_wakeup(adsp->dev, false);
You would want to do ^^ before rproc free since adsp is a
private data of rproc struct.
>
> return ret;
> }
> @@ -573,6 +574,7 @@ static int adsp_remove(struct platform_device *pdev)
> qcom_remove_smd_subdev(adsp->rproc, &adsp->smd_subdev);
> qcom_remove_ssr_subdev(adsp->rproc, &adsp->ssr_subdev);
> rproc_free(adsp->rproc);
> + device_init_wakeup(adsp->dev, false);
ditto.
>
> return 0;
> }
- Sibi
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH 1/2] remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
2022-11-11 11:54 [PATCH 1/2] remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove Luca Weiss
2022-11-11 11:54 ` [PATCH 2/2] remoteproc: qcom_q6v5_pas: detach power domains on remove Luca Weiss
2022-11-16 9:55 ` [PATCH 1/2] remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove Sibi Sankar
@ 2022-11-17 10:36 ` Mukesh Ojha
2 siblings, 0 replies; 6+ messages in thread
From: Mukesh Ojha @ 2022-11-17 10:36 UTC (permalink / raw)
To: Luca Weiss, linux-arm-msm
Cc: ~postmarketos/upstreaming, phone-devel, Andy Gross,
Bjorn Andersson, Konrad Dybcio, Mathieu Poirier, Siddharth Gupta,
Rishabh Bhatnagar, Sibi Sankar, linux-remoteproc, linux-kernel
Hi,
On 11/11/2022 5:24 PM, Luca Weiss wrote:
> Leaving wakeup enabled during probe fail (-EPROBE_DEFER) or remove makes
> the subsequent probe fail.
>
> [ 3.749454] remoteproc remoteproc0: releasing 3000000.remoteproc
> [ 3.752949] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17
> [ 3.878935] remoteproc remoteproc0: releasing 4080000.remoteproc
> [ 3.887602] qcom_q6v5_pas: probe of 4080000.remoteproc failed with error -17
> [ 4.319552] remoteproc remoteproc0: releasing 8300000.remoteproc
> [ 4.332716] qcom_q6v5_pas: probe of 8300000.remoteproc failed with error -17
>
> Fix this by disabling wakeup in both cases so the driver can properly
> probe on the next try.
>
> Fixes: a781e5aa5911 ("remoteproc: core: Prevent system suspend during remoteproc recovery")
> Fixes: dc86c129b4fb ("remoteproc: qcom: pas: Mark devices as wakeup capable")
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
LGTM.
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
-Mukesh
> ---
> drivers/remoteproc/qcom_q6v5_pas.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
> index 6afd0941e552..d830bf13c32c 100644
> --- a/drivers/remoteproc/qcom_q6v5_pas.c
> +++ b/drivers/remoteproc/qcom_q6v5_pas.c
> @@ -557,6 +557,7 @@ static int adsp_probe(struct platform_device *pdev)
> adsp_pds_detach(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
> free_rproc:
> rproc_free(rproc);
> + device_init_wakeup(adsp->dev, false);
>
> return ret;
> }
> @@ -573,6 +574,7 @@ static int adsp_remove(struct platform_device *pdev)
> qcom_remove_smd_subdev(adsp->rproc, &adsp->smd_subdev);
> qcom_remove_ssr_subdev(adsp->rproc, &adsp->ssr_subdev);
> rproc_free(adsp->rproc);
> + device_init_wakeup(adsp->dev, false);
>
> return 0;
> }
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-11-17 10:41 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-11 11:54 [PATCH 1/2] remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove Luca Weiss
2022-11-11 11:54 ` [PATCH 2/2] remoteproc: qcom_q6v5_pas: detach power domains on remove Luca Weiss
2022-11-16 9:33 ` Sibi Sankar
2022-11-17 10:40 ` Mukesh Ojha
2022-11-16 9:55 ` [PATCH 1/2] remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove Sibi Sankar
2022-11-17 10:36 ` Mukesh Ojha
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®