From: "Barnabás Czémán" <barnabas.czeman@mainlining.org>
To: Amir Hanip <killdeath104@gmail.com>
Cc: andersson@kernel.org, konradybcio@kernel.org,
linux-arm-msm@vger.kernel.org, abelvesa@kernel.org,
conor+dt@kernel.org, devicetree@vger.kernel.org,
krzk+dt@kernel.org, linux-kernel@vger.kernel.org,
robh@kernel.org, a39skl@gmail.com,
konrad.dybcio@oss.qualcomm.com
Subject: Re: [PATCH v3 2/3] arm64: dts: qcom: sm6115-xiaomi-lemon: Split out a common dtsi
Date: Sat, 07 Nov 2026 19:26:47 +0100 [thread overview]
Message-ID: <daea291c5b5d3b1ff87bbeaac4b08083@mainlining.org> (raw)
In-Reply-To: <20261107141432.39099-3-killdeath104@gmail.com>
On 2026-11-07 15:14, Amir Hanip wrote:
> Move the nodes shared with the other Xiaomi SM6115 variants (Redmi 9T
> and Poco M3) into sm6115-xiaomi-lime-common.dtsi, so that the other
> variants can reuse them. No functional change intended: the
> decompiled lemon DTS is identical before and after, except for the
> numbering of auto-generated phandles.
>
> Signed-off-by: Amir Hanip <killdeath104@gmail.com>
> ---
> .../boot/dts/qcom/sm6115-xiaomi-lemon.dts | 317 +----------------
> .../dts/qcom/sm6115-xiaomi-lime-common.dtsi | 335 ++++++++++++++++++
> 2 files changed, 336 insertions(+), 316 deletions(-)
> create mode 100644
> arch/arm64/boot/dts/qcom/sm6115-xiaomi-lime-common.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts
> b/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts
> index 881e05b701..2caaca3033 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts
> @@ -5,41 +5,17 @@
>
> /dts-v1/;
>
> -#include "sm6115.dtsi"
> -#include "pm6125.dtsi"
> -#include "pmi632.dtsi"
> #include <dt-bindings/leds/common.h>
> -
> -/delete-node/ &pil_adsp_mem;
> -/delete-node/ &pil_gpu_mem;
> -/delete-node/ &pil_ipa_fw_mem;
> -/delete-node/ &pil_ipa_gsi_mem;
> +#include "sm6115-xiaomi-lime-common.dtsi"
>
> / {
> model = "Xiaomi Redmi 9T";
> compatible = "xiaomi,lemon", "qcom,sm6115";
> - chassis-type = "handset";
>
> aliases {
> mmc0 = &sdhc_2;
> };
>
> - chosen {
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> -
> - framebuffer0: framebuffer@5c000000 {
> - compatible = "simple-framebuffer";
> - reg = <0 0x5c000000 0 (2340 * 1080 * 4)>;
> - width = <1080>;
> - height = <2340>;
> - stride = <(1080 * 4)>;
> - format = "a8r8g8b8";
> - clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
> - };
> - };
> -
> backlight_dsi: backlight-dsi {
> compatible = "led-backlight";
> leds = <&led_backlight>;
> @@ -49,38 +25,12 @@ backlight_dsi: backlight-dsi {
> status = "disabled";
> };
>
> - gpio-keys {
> - compatible = "gpio-keys";
> -
> - pinctrl-0 = <&vol_up_n>;
> - pinctrl-names = "default";
> -
> - key-volume-up {
> - label = "Volume Up";
> - linux,code = <KEY_VOLUMEUP>;
> - gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
> - debounce-interval = <15>;
> - linux,can-disable;
> - wakeup-source;
> - };
> - };
> -
> reserved-memory {
> pil_adsp_mem: memory@53400000 {
> reg = <0x0 0x53400000 0x0 0x2600000>;
> no-map;
> };
>
> - pil_ipa_fw_mem: memory@55a00000 {
> - reg = <0x0 0x55a00000 0x0 0x10000>;
> - no-map;
> - };
> -
> - pil_ipa_gsi_mem: memory@55a10000 {
> - reg = <0x0 0x55a10000 0x0 0x5000>;
> - no-map;
> - };
> -
> pil_gpu_mem: memory@fa400000 {
> reg = <0x0 0xfa400000 0x0 0x2000>;
> no-map;
> @@ -108,19 +58,6 @@ vph_pwr: vph-pwr-regulator {
> };
> };
>
> -&dispcc {
> - /* Prevent simplefb from dying until we wire panel driver */
> - status = "disabled";
> -};
> -
> -&gpi_dma0 {
> - status = "okay";
> -};
> -
> -&gpu {
> - status = "okay";
> -};
> -
> &i2c1 {
> status = "okay";
>
> @@ -158,118 +95,13 @@ &mdss_dsi0_out {
> data-lanes = <0 1 2 3>;
> };
>
> -&pil_cdsp_mem {
> - reg = <0x0 0x51a00000 0x0 0xa00000>;
> -};
> -
> -&pm6125_gpios {
> - vol_up_n: vol-up-n-state {
> - pins = "gpio5";
> - function = "normal";
> - power-source = <0>;
> - bias-pull-up;
> - input-enable;
> - };
> -};
> -
> -&pmi632_typec {
> - status = "okay";
> -
> - connector {
> - compatible = "usb-c-connector";
> -
> - power-role = "dual";
> - data-role = "dual";
> - self-powered;
> -
> - typec-power-opmode = "default";
> - pd-disable;
> -
> - vbus-supply = <&pmi632_vbus>;
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> - pmi632_hs_in: endpoint {
> - remote-endpoint = <&usb_dwc3_hs>;
> - };
> - };
> -
> - port@1 {
> - reg = <1>;
> - pmi632_ss_in: endpoint {
> - remote-endpoint = <&usb_qmpphy_out>;
> - };
> - };
> - };
> - };
> -};
> -
> -&pmi632_vbus {
> - regulator-min-microamp = <500000>;
> - regulator-max-microamp = <1000000>;
> -
> - status = "okay";
> -};
> -
> -&pon_pwrkey {
> - status = "okay";
> -};
> -
> -&pon_resin {
> - linux,code = <KEY_VOLUMEDOWN>;
> -
> - status = "okay";
> -};
> -
> -&qupv3_id_0 {
> - status = "okay";
> -};
> -
> -&remoteproc_adsp {
> - status = "okay";
> -};
> -
> -&remoteproc_cdsp {
> - status = "okay";
> -};
> -
> -&remoteproc_mpss {
> - status = "okay";
> -};
> -
You should not override rpm_request node here, you can use the labels
from the common to change the ranges like:
&pm6125_s7 {
regulator-min-microvolt = <1280000>;
regulator-max-microvolt = <2080000>;
};
> &rpm_requests {
> regulators-0 {
> - compatible = "qcom,rpm-pm6125-regulators";
> -
> - pm6125_s6: s6 {
> - regulator-min-microvolt = <304000>;
> - regulator-max-microvolt = <1456000>;
> - };
> -
> pm6125_s7: s7 {
> regulator-min-microvolt = <1280000>;
> regulator-max-microvolt = <2080000>;
> };
>
> - pm6125_s8: s8 {
> - regulator-min-microvolt = <1064000>;
> - regulator-max-microvolt = <1304000>;
> - };
> -
> - pm6125_l1: l1 {
> - regulator-min-microvolt = <952000>;
> - regulator-max-microvolt = <1152000>;
> - };
> -
> - pm6125_l4: l4 {
> - regulator-min-microvolt = <488000>;
> - regulator-max-microvolt = <1000000>;
> - };
> -
> pm6125_l5: l5 {
> regulator-min-microvolt = <1648000>;
> regulator-max-microvolt = <2960000>;
> @@ -278,11 +110,6 @@ pm6125_l5: l5 {
> regulator-always-on;
> };
>
> - pm6125_l6: l6 {
> - regulator-min-microvolt = <576000>;
> - regulator-max-microvolt = <656000>;
> - };
> -
> pm6125_l7: l7 {
> /* sdhci2 vdd-io-bias supply */
> regulator-min-microvolt = <1256000>;
> @@ -291,51 +118,11 @@ pm6125_l7: l7 {
> regulator-always-on;
> };
>
> - pm6125_l8: l8 {
> - regulator-min-microvolt = <400000>;
> - regulator-max-microvolt = <728000>;
> - };
> -
> - pm6125_l9: l9 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <2000000>;
> - };
> -
> - pm6125_l10: l10 {
> - regulator-min-microvolt = <1704000>;
> - regulator-max-microvolt = <1904000>;
> - };
> -
> pm6125_l11: l11 {
> regulator-min-microvolt = <1768000>;
> regulator-max-microvolt = <1952000>;
> };
>
> - pm6125_l12: l12 {
> - regulator-min-microvolt = <1624000>;
> - regulator-max-microvolt = <1984000>;
> - };
> -
> - pm6125_l13: l13 {
> - regulator-min-microvolt = <1504000>;
> - regulator-max-microvolt = <1952000>;
> - };
> -
> - pm6125_l14: l14 {
> - regulator-min-microvolt = <1704000>;
> - regulator-max-microvolt = <1904000>;
> - };
> -
> - pm6125_l15: l15 {
> - regulator-min-microvolt = <2920000>;
> - regulator-max-microvolt = <3232000>;
> - };
> -
> - pm6125_l16: l16 {
> - regulator-min-microvolt = <1704000>;
> - regulator-max-microvolt = <1904000>;
> - };
> -
> pm6125_l17: l17 {
> regulator-min-microvolt = <1152000>;
> regulator-max-microvolt = <1384000>;
> @@ -346,21 +133,6 @@ pm6125_l18: l18 {
> regulator-max-microvolt = <1232000>;
> };
>
> - pm6125_l19: l19 {
> - regulator-min-microvolt = <1624000>;
> - regulator-max-microvolt = <3304000>;
> - };
> -
> - pm6125_l20: l20 {
> - regulator-min-microvolt = <1624000>;
> - regulator-max-microvolt = <3304000>;
> - };
> -
> - pm6125_l21: l21 {
> - regulator-min-microvolt = <2400000>;
> - regulator-max-microvolt = <3600000>;
> - };
> -
> pm6125_l22: l22 {
> regulator-min-microvolt = <2952000>;
> regulator-max-microvolt = <2960000>;
> @@ -369,11 +141,6 @@ pm6125_l22: l22 {
> regulator-always-on;
> };
>
> - pm6125_l23: l23 {
> - regulator-min-microvolt = <3200000>;
> - regulator-max-microvolt = <3400000>;
> - };
> -
> pm6125_l24: l24 {
> regulator-min-microvolt = <2704000>;
> regulator-max-microvolt = <3600000>;
> @@ -382,23 +149,9 @@ pm6125_l24: l24 {
> };
>
> &sdhc_2 {
> - cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
> -
> - pinctrl-0 = <&sdc2_state_on>, <&sdc2_cd_on>;
> - pinctrl-1 = <&sdc2_state_off>, <&sdc2_cd_off>;
> - pinctrl-names = "default", "sleep";
> -
> - vmmc-supply = <&pm6125_l22>;
> - vqmmc-supply = <&pm6125_l5>;
> /* No binding for vdd-io-bias on L7*/
> no-sdio;
> no-mmc;
> -
> - status = "okay";
> -};
> -
> -&sleep_clk {
> - clock-frequency = <32764>;
> };
>
> &spi2 {
> @@ -406,8 +159,6 @@ &spi2 {
> };
>
> &tlmm {
> - gpio-reserved-ranges = <14 4>; /* Fingerprint SPI */
> -
> lm3692x_bl_active: lm3692x-active-state {
> pins = "gpio99";
> function = "gpio";
> @@ -422,20 +173,6 @@ mdss_dsi_active: mdss-dsi-active-state {
> bias-disable;
> };
>
> - sdc2_cd_on: sdc2-cd-on-state {
> - pins = "gpio88";
> - function = "gpio";
> - drive-strength = <2>;
> - bias-pull-up;
> - };
> -
> - sdc2_cd_off: sdc2-cd-off-state {
> - pins = "gpio88";
> - function = "gpio";
> - drive-strength = <2>;
> - bias-disable;
> - };
> -
> te_active: te-active-state {
> pins = "gpio81";
> function = "mdp_vsync";
> @@ -443,55 +180,3 @@ te_active: te-active-state {
> bias-pull-down;
> };
> };
> -
> -&ufs_mem_hc {
> - vcc-max-microamp = <600000>;
> - vcc-supply = <&pm6125_l24>;
> - vccq2-max-microamp = <600000>;
> - vccq2-supply = <&pm6125_l11>;
> - vdd-hba-supply = <&pm6125_l18>;
> -
> - status = "okay";
> -};
> -
> -&ufs_mem_phy {
> - vdda-phy-supply = <&pm6125_l4>;
> - vdda-pll-supply = <&pm6125_l12>;
> -
> - status = "okay";
> -};
> -
> -&usb {
> - status = "okay";
> -};
> -
> -&usb_dwc3 {
> - maximum-speed = "high-speed";
> -};
> -
> -&usb_dwc3_hs {
> - remote-endpoint = <&pmi632_hs_in>;
> -};
> -
> -&usb_hsphy {
> - vdd-supply = <&pm6125_l4>;
> - vdda-pll-supply = <&pm6125_l12>;
> - vdda-phy-dpdm-supply = <&pm6125_l15>;
> -
> - status = "okay";
> -};
> -
> -&usb_qmpphy {
> - vdda-phy-supply = <&pm6125_l4>;
> - vdda-pll-supply = <&pm6125_l12>;
> -
> - status = "okay";
> -};
> -
> -&usb_qmpphy_out {
> - remote-endpoint = <&pmi632_ss_in>;
> -};
> -
> -&xo_board {
> - clock-frequency = <19200000>;
> -};
> diff --git a/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lime-common.dtsi
> b/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lime-common.dtsi
> new file mode 100644
> index 0000000000..16883e35b5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lime-common.dtsi
> @@ -0,0 +1,335 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (c) 2026 Adam Skladowski <a39skl@gmail.com>
> + */
> +
> +#include "sm6115.dtsi"
> +#include "pm6125.dtsi"
> +#include "pmi632.dtsi"
> +
> +/delete-node/ &pil_adsp_mem;
> +/delete-node/ &pil_gpu_mem;
> +/delete-node/ &pil_ipa_fw_mem;
> +/delete-node/ &pil_ipa_gsi_mem;
> +
> +/ {
> + chassis-type = "handset";
> +
> + chosen {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + framebuffer0: framebuffer@5c000000 {
> + compatible = "simple-framebuffer";
> + reg = <0 0x5c000000 0 (2340 * 1080 * 4)>;
> + width = <1080>;
> + height = <2340>;
> + stride = <(1080 * 4)>;
> + format = "a8r8g8b8";
> + clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + pinctrl-0 = <&vol_up_n>;
> + pinctrl-names = "default";
> +
> + key-volume-up {
> + label = "Volume Up";
> + linux,code = <KEY_VOLUMEUP>;
> + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
> + debounce-interval = <15>;
> + linux,can-disable;
> + wakeup-source;
> + };
> + };
> +
> + reserved-memory {
> + pil_ipa_fw_mem: memory@55a00000 {
> + reg = <0x0 0x55a00000 0x0 0x10000>;
> + no-map;
> + };
> +
> + pil_ipa_gsi_mem: memory@55a10000 {
> + reg = <0x0 0x55a10000 0x0 0x5000>;
> + no-map;
> + };
> + };
> +};
> +
> +&dispcc {
> + /* Prevent simplefb from dying until we wire panel driver */
> + status = "disabled";
> +};
> +
> +&gpi_dma0 {
> + status = "okay";
> +};
> +
> +&gpu {
> + status = "okay";
> +};
> +
> +&pil_cdsp_mem {
> + reg = <0x0 0x51a00000 0x0 0xa00000>;
> +};
> +
> +&pm6125_gpios {
> + vol_up_n: vol-up-n-state {
> + pins = "gpio5";
> + function = "normal";
> + power-source = <0>;
> + bias-pull-up;
> + input-enable;
> + };
> +};
> +
> +&pmi632_typec {
> + status = "okay";
> +
> + connector {
> + compatible = "usb-c-connector";
> +
> + power-role = "dual";
> + data-role = "dual";
> + self-powered;
> +
> + typec-power-opmode = "default";
> + pd-disable;
> +
> + vbus-supply = <&pmi632_vbus>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + pmi632_hs_in: endpoint {
> + remote-endpoint = <&usb_dwc3_hs>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + pmi632_ss_in: endpoint {
> + remote-endpoint = <&usb_qmpphy_out>;
> + };
> + };
> + };
> + };
> +};
> +
> +&pmi632_vbus {
> + regulator-min-microamp = <500000>;
> + regulator-max-microamp = <1000000>;
> +
> + status = "okay";
> +};
> +
> +&pon_pwrkey {
> + status = "okay";
> +};
> +
> +&pon_resin {
> + linux,code = <KEY_VOLUMEDOWN>;
> +
> + status = "okay";
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&remoteproc_adsp {
> + status = "okay";
> +};
> +
> +&remoteproc_cdsp {
> + status = "okay";
> +};
> +
> +&remoteproc_mpss {
> + status = "okay";
> +};
> +
Please add the missing regulators.
> +&rpm_requests {
> + regulators-0 {
> + compatible = "qcom,rpm-pm6125-regulators";
> +
> + pm6125_s6: s6 {
> + regulator-min-microvolt = <304000>;
> + regulator-max-microvolt = <1456000>;
> + };
> +
> + pm6125_s8: s8 {
> + regulator-min-microvolt = <1064000>;
> + regulator-max-microvolt = <1304000>;
> + };
> +
> + pm6125_l1: l1 {
> + regulator-min-microvolt = <952000>;
> + regulator-max-microvolt = <1152000>;
> + };
> +
> + pm6125_l4: l4 {
> + regulator-min-microvolt = <488000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + pm6125_l6: l6 {
> + regulator-min-microvolt = <576000>;
> + regulator-max-microvolt = <656000>;
> + };
> +
> + pm6125_l8: l8 {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <728000>;
> + };
> +
> + pm6125_l9: l9 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2000000>;
> + };
> +
> + pm6125_l10: l10 {
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <1904000>;
> + };
> +
> + pm6125_l12: l12 {
> + regulator-min-microvolt = <1624000>;
> + regulator-max-microvolt = <1984000>;
> + };
> +
> + pm6125_l13: l13 {
> + regulator-min-microvolt = <1504000>;
> + regulator-max-microvolt = <1952000>;
> + };
> +
> + pm6125_l14: l14 {
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <1904000>;
> + };
> +
> + pm6125_l15: l15 {
> + regulator-min-microvolt = <2920000>;
> + regulator-max-microvolt = <3232000>;
> + };
> +
> + pm6125_l16: l16 {
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <1904000>;
> + };
> +
> + pm6125_l19: l19 {
> + regulator-min-microvolt = <1624000>;
> + regulator-max-microvolt = <3304000>;
> + };
> +
> + pm6125_l20: l20 {
> + regulator-min-microvolt = <1624000>;
> + regulator-max-microvolt = <3304000>;
> + };
> +
> + pm6125_l21: l21 {
> + regulator-min-microvolt = <2400000>;
> + regulator-max-microvolt = <3600000>;
> + };
> +
> + pm6125_l23: l23 {
> + regulator-min-microvolt = <3200000>;
> + regulator-max-microvolt = <3400000>;
> + };
> + };
> +};
> +
> +&sdhc_2 {
> + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
> +
> + pinctrl-0 = <&sdc2_state_on>, <&sdc2_cd_on>;
> + pinctrl-1 = <&sdc2_state_off>, <&sdc2_cd_off>;
> + pinctrl-names = "default", "sleep";
> +
> + vmmc-supply = <&pm6125_l22>;
> + vqmmc-supply = <&pm6125_l5>;
> +
> + status = "okay";
> +};
> +
> +&sleep_clk {
> + clock-frequency = <32764>;
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <14 4>; /* SE5 SPI (fingerprint), not usable
> from Linux */
> +
> + sdc2_cd_on: sdc2-cd-on-state {
> + pins = "gpio88";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + sdc2_cd_off: sdc2-cd-off-state {
> + pins = "gpio88";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +};
> +
> +&ufs_mem_hc {
> + vcc-max-microamp = <600000>;
> + vcc-supply = <&pm6125_l24>;
> + vccq2-max-microamp = <600000>;
> + vccq2-supply = <&pm6125_l11>;
> + vdd-hba-supply = <&pm6125_l18>;
> +
> + status = "okay";
> +};
> +
> +&ufs_mem_phy {
> + vdda-phy-supply = <&pm6125_l4>;
> + vdda-pll-supply = <&pm6125_l12>;
> +
> + status = "okay";
> +};
> +
> +&usb {
> + status = "okay";
> +};
> +
> +&usb_dwc3 {
> + maximum-speed = "high-speed";
> +};
> +
> +&usb_dwc3_hs {
> + remote-endpoint = <&pmi632_hs_in>;
> +};
> +
> +&usb_hsphy {
> + vdd-supply = <&pm6125_l4>;
> + vdda-pll-supply = <&pm6125_l12>;
> + vdda-phy-dpdm-supply = <&pm6125_l15>;
> +
> + status = "okay";
> +};
> +
> +&usb_qmpphy {
> + vdda-phy-supply = <&pm6125_l4>;
> + vdda-pll-supply = <&pm6125_l12>;
> +
> + status = "okay";
> +};
> +
> +&usb_qmpphy_out {
> + remote-endpoint = <&pmi632_ss_in>;
> +};
> +
> +&xo_board {
> + clock-frequency = <19200000>;
> +};
next prev parent reply other threads:[~2026-11-07 18:26 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-07 14:14 [PATCH v3 0/3] arm64: dts: qcom: Add Xiaomi Poco M3 (citrus) Amir Hanip
2026-11-07 14:14 ` [PATCH v3 1/3] dt-bindings: arm: qcom: Document Xiaomi Poco M3 Amir Hanip
2026-11-07 14:14 ` [PATCH v3 2/3] arm64: dts: qcom: sm6115-xiaomi-lemon: Split out a common dtsi Amir Hanip
2026-11-07 17:49 ` Barnabás Czémán
2026-11-07 18:26 ` Barnabás Czémán [this message]
2026-11-07 14:14 ` [PATCH v3 3/3] arm64: dts: qcom: Add Xiaomi Poco M3 Amir Hanip
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=daea291c5b5d3b1ff87bbeaac4b08083@mainlining.org \
--to=barnabas.czeman@mainlining.org \
--cc=a39skl@gmail.com \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=killdeath104@gmail.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®