* [PATCH][next] ieee802154: remove unused variable 'val'
@ 2018-03-01 14:40 Colin King
2018-03-02 10:41 ` Stefan Schmidt
0 siblings, 1 reply; 2+ messages in thread
From: Colin King @ 2018-03-01 14:40 UTC (permalink / raw)
To: Xue Liu, Alexander Aring, Stefan Schmidt, linux-wpan, netdev
Cc: kernel-janitors, linux-kernel
From: Colin Ian King <colin.king@canonical.com>
Variable 'val' is not being initialized and is later being logically
or'd with DAR_PHY_CTRL4_PROMISCUOUS. Considering this variable is never
being read anyway we may as well remove val altogether.
Cleans up error detected by cppcheck:
drivers/net/ieee802154/mcr20a.c:732: (error) Uninitialized variable: val
Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
drivers/net/ieee802154/mcr20a.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/ieee802154/mcr20a.c b/drivers/net/ieee802154/mcr20a.c
index d9eb22a52551..55a22c761808 100644
--- a/drivers/net/ieee802154/mcr20a.c
+++ b/drivers/net/ieee802154/mcr20a.c
@@ -723,13 +723,11 @@ mcr20a_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
struct mcr20a_local *lp = hw->priv;
int ret;
u8 rx_frame_filter_reg = 0x0;
- u8 val;
dev_dbg(printdev(lp), "%s(%d)\n", __func__, on);
if (on) {
/* All frame types accepted*/
- val |= DAR_PHY_CTRL4_PROMISCUOUS;
rx_frame_filter_reg &= ~(IAR_RX_FRAME_FLT_FRM_VER);
rx_frame_filter_reg |= (IAR_RX_FRAME_FLT_ACK_FT |
IAR_RX_FRAME_FLT_NS_FT);
--
2.15.1
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH][next] ieee802154: remove unused variable 'val'
2018-03-01 14:40 [PATCH][next] ieee802154: remove unused variable 'val' Colin King
@ 2018-03-02 10:41 ` Stefan Schmidt
0 siblings, 0 replies; 2+ messages in thread
From: Stefan Schmidt @ 2018-03-02 10:41 UTC (permalink / raw)
To: Colin King, Xue Liu, Alexander Aring, linux-wpan, netdev
Cc: kernel-janitors, linux-kernel
Hello.
On 03/01/2018 03:40 PM, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
>
> Variable 'val' is not being initialized and is later being logically
> or'd with DAR_PHY_CTRL4_PROMISCUOUS. Considering this variable is never
> being read anyway we may as well remove val altogether.
>
> Cleans up error detected by cppcheck:
> drivers/net/ieee802154/mcr20a.c:732: (error) Uninitialized variable: val
>
> Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver")
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
> ---
> drivers/net/ieee802154/mcr20a.c | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/drivers/net/ieee802154/mcr20a.c b/drivers/net/ieee802154/mcr20a.c
> index d9eb22a52551..55a22c761808 100644
> --- a/drivers/net/ieee802154/mcr20a.c
> +++ b/drivers/net/ieee802154/mcr20a.c
> @@ -723,13 +723,11 @@ mcr20a_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
> struct mcr20a_local *lp = hw->priv;
> int ret;
> u8 rx_frame_filter_reg = 0x0;
> - u8 val;
>
> dev_dbg(printdev(lp), "%s(%d)\n", __func__, on);
>
> if (on) {
> /* All frame types accepted*/
> - val |= DAR_PHY_CTRL4_PROMISCUOUS;
> rx_frame_filter_reg &= ~(IAR_RX_FRAME_FLT_FRM_VER);
> rx_frame_filter_reg |= (IAR_RX_FRAME_FLT_ACK_FT |
> IAR_RX_FRAME_FLT_NS_FT);
This patch has been applied to the wpan-next tree and will be
part of the next pull request to net-next. Thanks!
regards
Stefan Schmidt
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-03-02 10:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-01 14:40 [PATCH][next] ieee802154: remove unused variable 'val' Colin King
2018-03-02 10:41 ` Stefan Schmidt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®