mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Jessica Zhang <quic_jesszhan@quicinc.com>,
	Rob Clark <robdclark@gmail.com>,
	Abhinav Kumar <quic_abhinavk@quicinc.com>,
	Sean Paul <sean@poorly.run>, David Airlie <airlied@gmail.com>,
	Daniel Vetter <daniel@ffwll.ch>,
	Marijn Suijten <marijn.suijten@somainline.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>,
	linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/4] drm/msm/dsi: Adjust pclk rate for compression
Date: Wed, 3 May 2023 11:33:16 +0300	[thread overview]
Message-ID: <dc926d1c-2637-34a7-df82-c6bd119bfadd@linaro.org> (raw)
In-Reply-To: <20230405-add-dsc-support-v1-1-6bc6f03ae735@quicinc.com>

On 03/05/2023 04:19, Jessica Zhang wrote:
> Divide the pclk rate by the compression ratio when DSC is enabled
> 
> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
> ---
>   drivers/gpu/drm/msm/dsi/dsi_host.c | 14 ++++++++++----
>   1 file changed, 10 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 43a5ec33eee8..35c69dbe5f6f 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -561,7 +561,8 @@ void dsi_link_clk_disable_v2(struct msm_dsi_host *msm_host)
>   	clk_disable_unprepare(msm_host->byte_clk);
>   }
>   
> -static unsigned long dsi_get_pclk_rate(const struct drm_display_mode *mode, bool is_bonded_dsi)
> +static unsigned long dsi_get_pclk_rate(const struct drm_display_mode *mode,
> +		struct drm_dsc_config *dsc, bool is_bonded_dsi)
>   {
>   	unsigned long pclk_rate;
>   
> @@ -576,6 +577,11 @@ static unsigned long dsi_get_pclk_rate(const struct drm_display_mode *mode, bool
>   	if (is_bonded_dsi)
>   		pclk_rate /= 2;
>   
> +	/* If DSC is enabled, divide pclk by compression ratio */
> +	if (dsc)
> +		pclk_rate = DIV_ROUND_UP(pclk_rate,
> +				dsc->bits_per_component * 3 / msm_dsc_get_bpp_int(dsc));
> +

Don't we loose precision here?
Would DIV_ROUND_UP(pclk_rate * bpp, dsc->bpc * 3) be better?

>   	return pclk_rate;
>   }
>   
> @@ -585,7 +591,7 @@ unsigned long dsi_byte_clk_get_rate(struct mipi_dsi_host *host, bool is_bonded_d
>   	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
>   	u8 lanes = msm_host->lanes;
>   	u32 bpp = dsi_get_bpp(msm_host->format);
> -	unsigned long pclk_rate = dsi_get_pclk_rate(mode, is_bonded_dsi);
> +	unsigned long pclk_rate = dsi_get_pclk_rate(mode, msm_host->dsc, is_bonded_dsi);
>   	u64 pclk_bpp = (u64)pclk_rate * bpp;
>   
>   	if (lanes == 0) {
> @@ -604,7 +610,7 @@ unsigned long dsi_byte_clk_get_rate(struct mipi_dsi_host *host, bool is_bonded_d
>   
>   static void dsi_calc_pclk(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>   {
> -	msm_host->pixel_clk_rate = dsi_get_pclk_rate(msm_host->mode, is_bonded_dsi);
> +	msm_host->pixel_clk_rate = dsi_get_pclk_rate(msm_host->mode, msm_host->dsc, is_bonded_dsi);
>   	msm_host->byte_clk_rate = dsi_byte_clk_get_rate(&msm_host->base, is_bonded_dsi,
>   							msm_host->mode);
>   
> @@ -634,7 +640,7 @@ int dsi_calc_clk_rate_v2(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>   
>   	dsi_calc_pclk(msm_host, is_bonded_dsi);
>   
> -	pclk_bpp = (u64)dsi_get_pclk_rate(msm_host->mode, is_bonded_dsi) * bpp;
> +	pclk_bpp = (u64)dsi_get_pclk_rate(msm_host->mode, msm_host->dsc, is_bonded_dsi) * bpp;
>   	do_div(pclk_bpp, 8);
>   	msm_host->src_clk_rate = pclk_bpp;
>   
> 

-- 
With best wishes
Dmitry


  reply	other threads:[~2023-05-03  8:33 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-03  1:19 [PATCH 0/4] Add DSC v1.2 Support for DSI Jessica Zhang
2023-05-03  1:19 ` [PATCH 1/4] drm/msm/dsi: Adjust pclk rate for compression Jessica Zhang
2023-05-03  8:33   ` Dmitry Baryshkov [this message]
2023-05-03 17:10     ` Jessica Zhang
2023-05-04 20:33   ` Marijn Suijten
2023-05-04 21:17     ` Marijn Suijten
2023-05-05 18:57       ` Jessica Zhang
2023-05-03  1:19 ` [PATCH 2/4] drm/msm/dsi: Fix compressed word count calculation Jessica Zhang
2023-05-03  8:26   ` Dmitry Baryshkov
2023-05-03 17:34     ` Jessica Zhang
2023-05-08 20:09     ` Abhinav Kumar
2023-05-08 23:27       ` Dmitry Baryshkov
2023-05-09  0:45         ` Abhinav Kumar
2023-05-09  0:47           ` Dmitry Baryshkov
2023-05-09  4:36             ` Abhinav Kumar
2023-05-09  8:12         ` Konrad Dybcio
2023-05-09  8:23         ` Neil Armstrong
2023-05-09  8:54           ` Konrad Dybcio
2023-05-09 11:42             ` Dmitry Baryshkov
2023-05-09 18:02               ` [Freedreno] " Abhinav Kumar
2023-05-09 20:25                 ` Jessica Zhang
2023-05-03  1:19 ` [PATCH 3/4] drm/msm/dpu: Add has_data_compress to dpu_caps Jessica Zhang
2023-05-03  7:07   ` Marijn Suijten
2023-05-03 19:03     ` Jessica Zhang
2023-05-03 23:03       ` Marijn Suijten
2023-05-03 23:24         ` Jessica Zhang
2023-05-03  1:19 ` [PATCH 4/4] drm/msm/dpu: Enable compression for command mode Jessica Zhang
2023-05-03  7:28   ` Marijn Suijten
2023-05-03 19:04     ` Jessica Zhang
2023-05-03 19:51       ` Dmitry Baryshkov
2023-05-03 23:16         ` Jessica Zhang
2023-05-03 23:00       ` Marijn Suijten
2023-05-04  0:09         ` Jessica Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=dc926d1c-2637-34a7-df82-c6bd119bfadd@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=airlied@gmail.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marijn.suijten@somainline.org \
    --cc=quic_abhinavk@quicinc.com \
    --cc=quic_jesszhan@quicinc.com \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®