From: Andrew Lunn <andrew@lunn.ch>
To: "Pali Rohár" <pali@kernel.org>
Cc: Benjamin Schneider <bschnei@gmail.com>,
Gregory Clement <gregory.clement@bootlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Benjamin Schneider <ben@bens.haus>
Subject: Re: [PATCH] cpufreq: enable 1200Mhz clock speed for armada-37xx
Date: Thu, 6 Jun 2024 01:44:47 +0200 [thread overview]
Message-ID: <dce98e50-6b50-4d4e-abe2-8419a675d25e@lunn.ch> (raw)
In-Reply-To: <20240605194422.klxtxgyljrrllkzy@pali>
On Wed, Jun 05, 2024 at 09:44:22PM +0200, Pali Rohár wrote:
> On Sunday 02 June 2024 18:26:38 Benjamin Schneider wrote:
> > This frequency was disabled because of unresolved stability problems.
> > However, based on several months of testing, the source of the
> > stability problems seems to be the bootloader, not the kernel.
> > Marvell has recently merged changes to their bootloader source that
> > addresses the stability issues when frequency scaling is enabled at
> > all frequencies including 1.2Ghz.
> >
> > Signed-off-by: Benjamin Schneider <ben@bens.haus>
> > ---
> > drivers/cpufreq/armada-37xx-cpufreq.c | 6 +-----
> > 1 file changed, 1 insertion(+), 5 deletions(-)
> >
> > diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
> > index bea41ccab..f28a4435f 100644
> > --- a/drivers/cpufreq/armada-37xx-cpufreq.c
> > +++ b/drivers/cpufreq/armada-37xx-cpufreq.c
> > @@ -102,11 +102,7 @@ struct armada_37xx_dvfs {
> > };
> >
> > static struct armada_37xx_dvfs armada_37xx_dvfs[] = {
> > - /*
> > - * The cpufreq scaling for 1.2 GHz variant of the SOC is currently
> > - * unstable because we do not know how to configure it properly.
> > - */
> > - /* {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} }, */
> > + {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} },
> > {.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} },
> > {.cpu_freq_max = 800*1000*1000, .divider = {1, 2, 3, 4} },
> > {.cpu_freq_max = 600*1000*1000, .divider = {2, 4, 5, 6} },
> > --
> > 2.45.1
>
> As without the updated firmware on 1.2 GHz variant of the SoC is kernel
> already crashing, even with commented line for .cpu_freq_max = 1200,
> this change makes sense.
>
> There is no reason to have 1.2 GHz line disabled as it does not solve
> any issue (as was originally thought) and just prevent people with
> updated firmware to use non-performance governor on that SoC.
> (When cpufreq driver is not loaded then CPU frequency of the SoC is
> locked at the max speed, which has observed behavior same as performance
> cpufreq governor).
>
> So, go ahead with this change with my
>
> Reviewed-by: Pali Rohár <pali@kernel.org>
I defer to your knowledge in this matter.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
next prev parent reply other threads:[~2024-06-05 23:44 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-03 1:26 Benjamin Schneider
2024-06-03 1:26 ` Benjamin Schneider
2024-06-03 12:46 ` Andrew Lunn
2024-06-03 19:33 ` Ben Schneider
2024-06-05 19:44 ` Pali Rohár
2024-06-05 23:44 ` Andrew Lunn [this message]
2024-07-11 16:59 ` Ben Schneider
2024-07-16 8:51 ` Gregory CLEMENT
2024-09-09 13:00 ` Ben Schneider
2024-10-13 3:01 ` Ben Schneider
2024-11-25 21:14 bschnei
2024-12-12 7:07 ` Viresh Kumar
2024-12-15 21:23 ` Marek Behún
2025-01-12 22:49 ` Ben Schneider
2025-02-03 10:57 ` Viresh Kumar
2025-02-19 5:52 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dce98e50-6b50-4d4e-abe2-8419a675d25e@lunn.ch \
--to=andrew@lunn.ch \
--cc=ben@bens.haus \
--cc=bschnei@gmail.com \
--cc=gregory.clement@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pali@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®