From: "Justin Mattock" <justinmattock@gmail.com>
To: "Tejun Heo" <htejun@gmail.com>
Cc: "Andrew Morton" <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: Re: macbook pro dvd playback after suspend Buffer I/O error
Date: Thu, 12 Jun 2008 06:15:56 +0000 [thread overview]
Message-ID: <dd18b0c30806112315x70dee219oa6738de3e22d4939@mail.gmail.com> (raw)
In-Reply-To: <dd18b0c30806112222k60e411dfs98e4cc7f64938b5b@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2137 bytes --]
On Thu, Jun 12, 2008 at 5:22 AM, Justin Mattock <justinmattock@gmail.com> wrote:
> On Thu, Jun 12, 2008 at 4:15 AM, Tejun Heo <htejun@gmail.com> wrote:
>> Hello,
>>
>> Please do the followings.
>>
>> 1. apply the attached patch
>> 2. turn on device drivers -> SCSI -> SCSI verbose logging
>> 3. rebuild the kernel and boot the new kernel.
>> 4. run "sysctl -w dev.scsi.logging_level=1"
>> 5. run the suspend/resume test w/ dd and report the result.
>>
>> Thanks.
>>
>> --
>> tejun
>>
>> ---
>> drivers/ata/libata-eh.c | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> Index: work/drivers/ata/libata-eh.c
>> ===================================================================
>> --- work.orig/drivers/ata/libata-eh.c
>> +++ work/drivers/ata/libata-eh.c
>> @@ -2507,6 +2507,9 @@ static int atapi_eh_clear_ua(struct ata_
>> return -EIO;
>> }
>>
>> + ata_dev_printk(dev, KERN_WARNING, "XXX: TUR err_mask=0x%x sense_key=0x%x\n",
>> + err_mask, sense_key);
>> +
>> if (!err_mask || sense_key != UNIT_ATTENTION)
>> return 0;
>>
>> @@ -2516,6 +2519,9 @@ static int atapi_eh_clear_ua(struct ata_
>> "UNIT ATTENTION (err_mask=0x%x)\n", err_mask);
>> return -EIO;
>> }
>> +
>> + ata_dev_printk(dev, KERN_WARNING, "XXX: REQUEST SENSE err_mask=0x%x ASC=0x%x ASCQ=0x%x\n",
>> + err_mask, sense_buffer[12], sense_buffer[13]);
>> }
>>
>> ata_dev_printk(dev, KERN_WARNING,
>>
>>
>
> Alright; I'll let you know what happens.
> regards;
>
> --
> Justin P. Mattock
>
O.K. applied the patch and did what you have described,(except for
sysctl -w / ended up inserting dev.scsi.logging_level=1 in
/etc/sysctl.conf)
This is what dd reported:(same as before)
dd: reading `/dev/sr0':Input/output error
41+1 records in
41+1 records out
43122688 bytes (43 MB) copied, 41.0967 seconds, 1.0 MB/s
Attached is dmesg of using dd on the first suspend, and playing a dvd
on the second.
regards;
--
Justin P. Mattock
[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 65119 bytes --]
[ 0.000000] Linux version 2.6.26-rc5-00017-g1242292 (root@unix) (gcc version 4.2.3 (Debian 4.2.3-3)) #11 SMP Thu Jun 12 05:45:17 UTC 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable)
[ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] 112MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 258282) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 258282
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 258282
[ 0.000000] On node 0 totalpages: 258282
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 226 pages used for memmap
[ 0.000000] HighMem zone: 28680 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
[ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
[ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 INTL 20050309)
[ 0.000000] ACPI: FACS 3FEC0000, 0040
[ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
[ 0.000000] ACPI: DMI detected: Apple
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 46760 bytes of per cpu data
[ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256264
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash vga=773 selinux=1 audit=1 enforcing=1 debug acpi_osi=Linux pnpacpi=off pci=routeirq usbcore.autosuspend=1 nmi_watchdog=0
[ 0.000000] audit: enabled (after initialization)
[ 0.000000] ACPI: Added _OSI(Linux)
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Detected 2161.309 MHz processor.
[ 0.010000] Console: colour dummy device 80x25
[ 0.010000] console [tty0] enabled
[ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.010000] Memory: 1018672k/1033128k available (2564k kernel code, 13840k reserved, 1315k data, 328k init, 115624k highmem)
[ 0.010000] virtual kernel memory layout:
[ 0.010000] fixmap : 0xfff7e000 - 0xfffff000 ( 516 kB)
[ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.010000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.010000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.010000] .init : 0xc04cf000 - 0xc0521000 ( 328 kB)
[ 0.010000] .data : 0xc038113d - 0xc04c9dac (1315 kB)
[ 0.010000] .text : 0xc0100000 - 0xc038113d (2564 kB)
[ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.010000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.010000] hpet clockevent registered
[ 0.159747] Calibrating delay using timer specific routine.. 4327.95 BogoMIPS (lpj=21639750)
[ 0.159837] Security Framework initialized
[ 0.159849] SELinux: Initializing.
[ 0.159872] SELinux: Starting in enforcing mode
[ 0.159885] selinux_register_security: Registering secondary module capability
[ 0.159898] Capability LSM initialized as secondary
[ 0.159942] Mount-cache hash table entries: 512
[ 0.160000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.160000] CPU: L2 cache: 4096K
[ 0.160000] CPU: Physical Processor ID: 0
[ 0.160000] CPU: Processor Core ID: 0
[ 0.160000] Intel machine check architecture supported.
[ 0.160000] Intel machine check reporting enabled on CPU#0.
[ 0.160000] using mwait in idle threads.
[ 0.160000] Checking 'hlt' instruction... OK.
[ 0.200000] ACPI: Core revision 20080321
[ 0.227971] ENABLING IO-APIC IRQs
[ 0.228195] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.328179] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 0.330000] Booting processor 1/1 ip 6000
[ 0.340000] Initializing CPU#1
[ 0.340000] Calibrating delay using timer specific routine.. 4322.58 BogoMIPS (lpj=21612947)
[ 0.340000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.340000] CPU: L2 cache: 4096K
[ 0.340000] CPU: Physical Processor ID: 0
[ 0.340000] CPU: Processor Core ID: 1
[ 0.340000] Intel machine check architecture supported.
[ 0.340000] Intel machine check reporting enabled on CPU#1.
[ 0.490000] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 0.490000] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.490036] Brought up 2 CPUs
[ 0.490046] Total of 2 processors activated (8650.53 BogoMIPS).
[ 0.490080] CPU0 attaching sched-domain:
[ 0.490090] domain 0: span 0-1
[ 0.490098] groups: 0 1
[ 0.490114] CPU1 attaching sched-domain:
[ 0.490123] domain 0: span 0-1
[ 0.490131] groups: 1 0
[ 0.500000] net_namespace: 516 bytes
[ 0.500000] Booting paravirtualized kernel on bare hardware
[ 0.500000] NET: Registered protocol family 16
[ 0.500000] No dock devices found.
[ 0.500000] EISA bus registered
[ 0.500000] ACPI: bus type pci registered
[ 0.500000] PCI: Using configuration type 1 for base access
[ 0.500000] Setting up standard PCI resources
[ 0.510000] ACPI: EC: EC description table is found, configuring boot EC
[ 0.510000] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.530000] ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.531624] ACPI: Interpreter enabled
[ 0.531634] ACPI: (supports S0 S3 S4 S5)
[ 0.531760] ACPI: Using IOAPIC for interrupt routing
[ 0.580000] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.580000] ACPI: EC: driver started in interrupt mode
[ 0.580000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.580000] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.580000] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.580000] PCI: Transparent bridge - 0000:00:1e.0
[ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.581000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.581989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.585772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.632749] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.632749] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.632749] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.632749] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.632749] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.632749] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.632749] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.632749] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.632749] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.632749] pnp: PnP ACPI: disabled
[ 0.632749] SCSI subsystem initialized
[ 0.632749] libata version 3.00 loaded.
[ 0.632749] usbcore: registered new interface driver usbfs
[ 0.632749] usbcore: registered new interface driver hub
[ 0.632749] usbcore: registered new device driver usb
[ 0.642749] PCI: Using ACPI for IRQ routing
[ 0.642749] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
[ 0.642749] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.642749] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.642749] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 0.642749] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.642749] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.642749] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.642749] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 0.642749] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.642749] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.642749] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 0.642749] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 0.642749] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.642749] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.642749] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.642749] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.642749] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.642749] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.642749] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.662511] NetLabel: Initializing
[ 0.662520] NetLabel: domain hash size = 128
[ 0.662528] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.662670] NetLabel: unlabeled traffic allowed by default
[ 0.662688] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.662704] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.671367] Switched to high resolution mode on CPU 0
[ 0.674077] Switched to high resolution mode on CPU 1
[ 0.715225] PCI: Bridge: 0000:00:01.0
[ 0.715225] IO window: 3000-3fff
[ 0.715225] MEM window: 0x50300000-0x503fffff
[ 0.715225] PREFETCH window: 0x0000000040000000-0x0000000047ffffff
[ 0.715225] PCI: Bridge: 0000:00:1c.0
[ 0.715225] IO window: 2000-2fff
[ 0.715225] MEM window: 0x50200000-0x502fffff
[ 0.715225] PREFETCH window: 0x0000000050500000-0x00000000505fffff
[ 0.715225] PCI: Bridge: 0000:00:1c.1
[ 0.715225] IO window: disabled.
[ 0.715225] MEM window: 0x50100000-0x501fffff
[ 0.715225] PREFETCH window: disabled.
[ 0.715225] PCI: Bridge: 0000:00:1c.2
[ 0.715225] IO window: 1000-1fff
[ 0.715225] MEM window: 0x4c100000-0x500fffff
[ 0.715225] PREFETCH window: 0x0000000048000000-0x000000004bffffff
[ 0.715225] PCI: Bridge: 0000:00:1e.0
[ 0.715225] IO window: disabled.
[ 0.715225] MEM window: 0x4c000000-0x4c0fffff
[ 0.715225] PREFETCH window: disabled.
[ 0.715225] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.715225] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.715225] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.715225] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.715225] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.715225] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.715225] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.715225] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.715225] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.715225] NET: Registered protocol family 2
[ 0.745366] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.745905] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.746635] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[ 0.747609] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.747621] TCP reno registered
[ 0.755470] NET: Registered protocol family 1
[ 0.775224] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[ 0.775224] Initializing RT-Tester: OK
[ 0.775224] audit: initializing netlink socket (enabled)
[ 0.775224] type=2000 audit(1213250471.751:1): initialized
[ 0.785225] highmem bounce pool size: 64 pages
[ 0.785225] Total HugeTLB memory allocated, 0
[ 0.820404] fuse init (API version 7.9)
[ 0.820404] msgmni has been set to 1764 for ipc namespace c04a3e80
[ 0.820404] SELinux: Registering netfilter hooks
[ 0.820668] io scheduler noop registered
[ 0.830174] io scheduler cfq registered (default)
[ 0.830174] pci 0000:01:00.0: Boot video device
[ 0.830174] vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 1536k, total 16384k
[ 0.830174] vesafb: mode is 1024x768x8, linelength=1024, pages=18
[ 0.830174] vesafb: protected mode interface info at c000:ad0c
[ 0.830174] vesafb: pmi: set display start = c00cad94, set palette = c00cae50
[ 0.830174] vesafb: scrolling: redraw
[ 0.830174] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 0.847140] Console: switching to colour frame buffer device 128x48
[ 0.860172] fb0: VESA VGA frame buffer device
[ 0.860172] power_supply ADP1: uevent
[ 0.860172] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 0.860172] power_supply ADP1: Static prop TYPE=Mains
[ 0.860172] power_supply ADP1: 1 dynamic props
[ 0.860172] power_supply ADP1: prop ONLINE=1
[ 0.860173] power_supply ADP1: power_supply_changed
[ 0.860173] ACPI: AC Adapter [ADP1] (on-line)
[ 0.860173] power_supply ADP1: power_supply_changed_work
[ 0.860173] power_supply ADP1: power_supply_update_gen_leds 1
[ 0.860173] power_supply ADP1: uevent
[ 0.860173] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 0.860173] power_supply ADP1: Static prop TYPE=Mains
[ 0.860173] power_supply ADP1: 1 dynamic props
[ 0.860173] power_supply ADP1: prop ONLINE=1
[ 0.869287] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.899266] hpet_resources: 0xfed00000 is busy
[ 0.909267] loop: module loaded
[ 0.909278] Linux video capture interface: v2.00
[ 0.914478] input: Macintosh mouse button emulation as /class/input/input0
[ 0.920436] Driver 'sd' needs updating - please use bus_type methods
[ 0.925773] Driver 'sr' needs updating - please use bus_type methods
[ 0.931630] ata_piix 0000:00:1f.1: version 2.12
[ 0.931630] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.940524] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 0.946094] scsi0 : ata_piix
[ 0.957337] scsi1 : ata_piix
[ 0.963469] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
[ 0.963469] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
[ 1.151574] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66
[ 1.191513] ata1.00: configured for UDMA/66
[ 1.206602] ata1.00: XXX: TUR err_mask=0x1 sense_key=0x2
[ 1.380970] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KCV9 PQ: 0 ANSI: 5
[ 1.395315] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.395315] Uniform CD-ROM driver Revision: 3.20
[ 1.409112] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.409112] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.409112] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.415731] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 1.575304] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1.585277] scsi2 : ata_piix
[ 1.595865] scsi3 : ata_piix
[ 1.597416] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
[ 1.605278] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
[ 1.787593] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
[ 1.787593] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.836842] ata3.01: configured for UDMA/100
[ 2.008144] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
[ 2.008144] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 2.022994] sd 2:0:1:0: [sda] Write Protect is off
[ 2.028585] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.034270] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.040290] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 2.050116] sd 2:0:1:0: [sda] Write Protect is off
[ 2.055984] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.061976] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.068155] sda: sda1 sda2 < sda5 >
[ 2.081002] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.081002] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 2.095289] usbcore: registered new interface driver usblcd
[ 2.101866] usbcore: registered new interface driver usbled
[ 2.108023] PNP: No PS/2 controller found. Probing ports directly.
[ 2.115969] i8042.c: No controller found.
[ 2.135139] mice: PS/2 mouse device common for all mice
[ 2.135139] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 2.145156] EDAC MC: Ver: 2.1.0 Jun 5 2008
[ 2.157423] cpuidle: using governor ladder
[ 2.157423] cpuidle: using governor menu
[ 2.167457] usbcore: registered new interface driver hiddev
[ 2.178538] usbcore: registered new interface driver usbhid
[ 2.178538] usbhid: v2.6:USB HID core driver
[ 2.190828] Advanced Linux Sound Architecture Driver Version 1.0.16.
[ 2.190828] ALSA device list:
[ 2.198525] No soundcards found.
[ 2.210970] oprofile: using NMI interrupt.
[ 2.210970] IPVS: Registered protocols (TCP, AH, ESP)
[ 2.222191] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 2.228228] IPVS: ipvs loaded.
[ 2.236523] Initializing XFRM netlink socket
[ 2.242567] NET: Registered protocol family 17
[ 2.248524] NET: Registered protocol family 15
[ 2.254366] Using IPI No-Shortcut mode
[ 2.268538] kjournald starting. Commit interval 5 seconds
[ 2.266094] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.266094] VFS: Mounted root (ext3 filesystem) readonly.
[ 2.266094] Freeing unused kernel memory: 328k freed
[ 3.089302] SELinux: 8192 avtab hash slots, 205740 rules.
[ 3.373913] SELinux: 8192 avtab hash slots, 205740 rules.
[ 3.739319] SELinux: 7 users, 7 roles, 3017 types, 90 bools
[ 3.743914] SELinux: 72 classes, 205740 rules
[ 3.763395] SELinux: Completing initialization.
[ 3.768974] SELinux: Setting up existing superblocks.
[ 3.785288] SELinux: initialized (dev sda1, type ext3), uses xattr
[ 3.874504] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 3.965622] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 3.965622] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
[ 3.971268] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 3.976868] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
[ 3.982382] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 3.987910] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 3.993548] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 3.999253] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 4.007910] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 4.013616] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 4.019280] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 4.024857] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 4.030365] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 4.082841] SELinux: policy loaded with handle_unknown=deny
[ 4.090289] type=1403 audit(1213250474.960:2): policy loaded auid=4294967295 ses=4294967295
[ 5.275811] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.297281] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 11.224581] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 11.541652] power_supply ADP1: uevent
[ 11.553649] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 11.563795] power_supply ADP1: Static prop TYPE=Mains
[ 11.569666] power_supply ADP1: 1 dynamic props
[ 11.575539] power_supply ADP1: prop ONLINE=1
[ 13.855810] input: Power Button (FF) as /class/input/input1
[ 13.906165] ACPI: Power Button (FF) [PWRF]
[ 13.915146] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309)
[ 13.922636] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
[ 13.941084] Monitor-Mwait will be used to enter C-1 state
[ 13.947001] Monitor-Mwait will be used to enter C-2 state
[ 13.952751] Monitor-Mwait will be used to enter C-3 state
[ 13.960407] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 13.965793] ACPI: ACPI0007:00 is registered as cooling_device0
[ 13.971532] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 13.977766] input: Lid Switch as /class/input/input2
[ 13.983752] ACPI: Lid Switch [LID0]
[ 13.990508] input: Power Button (CM) as /class/input/input3
[ 14.035117] ACPI: Power Button (CM) [PWRB]
[ 14.035117] input: Sleep Button (CM) as /class/input/input4
[ 14.087370] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
[ 14.096120] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
[ 14.120418] ACPI: Sleep Button (CM) [SLPB]
[ 14.188290] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 14.194369] ACPI: ACPI0007:01 is registered as cooling_device1
[ 14.201163] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 14.258972] USB Universal Host Controller Interface driver v3.0
[ 14.264610] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 14.270651] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 14.280524] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 14.288973] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 14.295267] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 14.301841] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 14.308970] usb usb1: configuration #1 chosen from 1 choice
[ 14.315332] hub 1-0:1.0: USB hub found
[ 14.321884] hub 1-0:1.0: 2 ports detected
[ 14.408354] input: Video Bus as /class/input/input5
[ 14.429725] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 14.435944] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 14.446201] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 14.452295] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 14.458350] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 14.468700] usb usb2: configuration #1 chosen from 1 choice
[ 14.474294] hub 2-0:1.0: USB hub found
[ 14.480323] hub 2-0:1.0: 2 ports detected
[ 14.494093] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 14.593496] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 14.593496] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 14.603479] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.609830] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 14.616407] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 14.626638] usb usb3: configuration #1 chosen from 1 choice
[ 14.632750] hub 3-0:1.0: USB hub found
[ 14.639112] hub 3-0:1.0: 2 ports detected
[ 14.695270] Marking TSC unstable due to: TSC halts in idle.
[ 14.760255] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 14.760255] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 14.770237] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 14.780356] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 14.786767] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 14.793661] usb usb4: configuration #1 chosen from 1 choice
[ 14.800283] hub 4-0:1.0: USB hub found
[ 14.806713] hub 4-0:1.0: 2 ports detected
[ 14.813068] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 14.920254] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 14.925233] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 14.987941] ath_hal: module license 'Proprietary' taints kernel.
[ 15.005619] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
[ 15.021357] hda_codec: STAC922x, Apple subsys_id=106b1e00
[ 15.021357] usb 1-2: configuration #1 chosen from 1 choice
[ 15.033500] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input6
[ 15.110169] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 15.114601] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 15.124816] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 15.124816] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7
[ 15.140988] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 15.149636] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 15.164938] ehci_hcd 0000:00:1d.7: debug port 1
[ 15.168534] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 15.173385] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400
[ 15.187626] wlan: svn r3692
[ 15.260527] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 15.271188] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 15.271500] usb usb5: configuration #1 chosen from 1 choice
[ 15.271631] hub 5-0:1.0: USB hub found
[ 15.271654] hub 5-0:1.0: 8 ports detected
[ 15.416154] ath_pci: svn r3692
[ 15.456168] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 15.519122] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 15.567827] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 15.574124] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 15.711389] MadWifi: ath_attach: HAL managed transmit power control (TPC) disabled.
[ 15.719520] MadWifi: ath_attach: Interference mitigation is supported. Currently disabled.
[ 15.730951] MadWifi: ath_attach: Switching rfkill capability off.
[ 15.887742] usb 1-2: USB disconnect, address 2
[ 15.909367] ath_rate_sample: 1.2 (svn r3692)
[ 16.039550] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 16.049367] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 16.056150] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 16.066150] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 16.074565] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 16.082986] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 16.091295] wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0)
[ 16.099626] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 16.106231] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 16.116232] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 16.124429] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 16.132467] wifi0: Use hw queue 4 for XR traffic
[ 16.140325] wifi0: Use hw queue 7 for UAPSD traffic
[ 16.145746] wifi0: Use hw queue 8 for CAB traffic
[ 16.155748] wifi0: Use hw queue 9 for beacons
[ 16.631192] ath_pci: wifi0: Atheros 5418: mem=0x50100000, irq=17
[ 16.887569] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe2ad87e]
[ 17.328442] usb 5-4: new high speed USB device using ehci_hcd and address 3
[ 17.479683] usb 5-4: configuration #1 chosen from 1 choice
[ 18.051006] usbcore: registered new interface driver appletouch
[ 18.332829] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 18.579430] usb 1-2: configuration #1 chosen from 1 choice
[ 18.594708] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input8
[ 18.634828] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 18.650365] appletouch: Geyser mode initialized.
[ 18.651615] input: appletouch as /class/input/input9
[ 18.688715] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input10
[ 18.716983] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 19.029920] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 19.222871] usb 3-2: configuration #1 chosen from 1 choice
[ 19.237996] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
[ 19.284168] Clocksource tsc unstable (delta = -311482197 ns)
[ 19.525524] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 19.727361] usb 4-1: configuration #1 chosen from 1 choice
[ 19.758767] drivers/hid/usbhid/hid-core.c: couldn't find an input interrupt endpoint
[ 19.771205] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[ 19.784027] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 19.804606] input: Built-in iSight as /class/input/input11
[ 19.875298] usbcore: registered new interface driver uvcvideo
[ 19.884711] USB Video Class driver (SVN r212)
[ 20.582986] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 20.746584] applesmc: Apple MacBook Pro detected:
[ 20.760798] applesmc: - Model with accelerometer
[ 20.768735] applesmc: - Model with light sensors and backlight
[ 20.775756] applesmc: - Model with 12 temperature sensors
[ 20.784272] applesmc: device has already been initialized (0xe0, 0x00).
[ 20.791300] applesmc: device successfully initialized.
[ 20.798656] applesmc: 2 fans found.
[ 20.806616] input: applesmc as /class/input/input12
[ 20.816618] usb 5-4: usbfs: USBDEVFS_CONTROL failed cmd ift-load rqt 64 rq 160 len 1 ret -71
[ 20.813754] usb 5-4: USB disconnect, address 3
[ 20.870779] Registered led device: smc::kbd_backlight
[ 20.870779] applesmc: driver successfully loaded.
[ 20.894080] usb 5-4: usbfs: USBDEVFS_CONTROL failed cmd ift-load rqt 64 rq 160 len 1 ret -71
[ 20.939381] Linux agpgart interface v0.103
[ 21.026863] Symbol init_mm is marked as UNUSED, however this module is using it.
[ 21.034750] This symbol will go away in the future.
[ 21.042457] Please evalute if this is the right api to use and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
[ 21.099652] [fglrx] Maximum main memory to use for locked dma buffers: 913 MBytes.
[ 21.112421] [fglrx] ASYNCIO init succeed!
[ 21.123945] [fglrx] PAT is enabled successfully!
[ 21.136085] [fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0
[ 21.566176] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.702905] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 21.769443] arp_tables: (C) 2002 David S. Miller
[ 21.842609] ieee80211_crypt: registered algorithm 'NULL'
[ 21.872228] ieee80211_crypt: registered algorithm 'TKIP'
[ 22.032552] usbcore: registered new interface driver isight_firmware
[ 22.088987] ipmi message handler version 39.2
[ 22.128610] IPMI Watchdog: driver initialized
[ 22.373471] Adding 2988048k swap on /dev/disk/by-uuid/c58cdc7c-b94b-4116-9cca-bf154269e4d8. Priority:-1 extents:1 across:2988048k
[ 22.583172] EXT3 FS on sda1, internal journal
[ 22.846319] usb 5-4: new high speed USB device using ehci_hcd and address 6
[ 23.032778] usb 5-4: configuration #1 chosen from 1 choice
[ 23.032778] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[ 23.049417] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 23.071214] input: Built-in iSight as /class/input/input13
[ 27.370941] appletouch: incomplete data package (first byte: 2, length: 4).
[ 29.370251] input: Pommed beeper device as /class/input/input14
[ 29.636131] Bluetooth: Core ver 2.11
[ 29.654885] NET: Registered protocol family 31
[ 29.654885] Bluetooth: HCI device and connection manager initialized
[ 29.654885] Bluetooth: HCI socket layer initialized
[ 29.723116] Bluetooth: L2CAP ver 2.9
[ 29.723116] Bluetooth: L2CAP socket layer initialized
[ 29.823473] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 29.860858] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[ 29.907328] Bluetooth: RFCOMM socket layer initialized
[ 29.907328] Bluetooth: RFCOMM TTY layer initialized
[ 29.907328] Bluetooth: RFCOMM ver 1.8
[ 30.217404] usb 4-1: USB disconnect, address 2
[ 30.515871] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 30.767818] usb 4-1: configuration #1 chosen from 1 choice
[ 31.030575] Bluetooth: HCI USB driver ver 2.9
[ 31.037979] usbcore: registered new interface driver hci_usb
[ 33.102759] CPA self-test:
[ 33.102823] 4k 0 large 224 gb 0 x 224[c0000000-f7c00000] miss 0
[ 33.119333] 4k 189440 large 39 gb 0 x 189479[c0000000-f7fff000] miss 0
[ 33.141737] 4k 189440 large 39 gb 0 x 189479[c0000000-f7fff000] miss 0
[ 33.141744] ok.
[ 38.848137] input: Apple Computer, Inc. Mighty Mouse as /class/input/input15
[ 42.947467] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 46.225847] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 46.225858] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[ 46.225864] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
[ 46.367469] [fglrx] interrupt source 20008000 successfully enabled
[ 46.367479] [fglrx] enable ID = 0x00000008
[ 46.367493] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 46.367682] [fglrx] interrupt source 10000000 successfully enabled
[ 46.367687] [fglrx] enable ID = 0x00000009
[ 46.367697] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 290.071272] PM: Syncing filesystems ... done.
[ 291.102146] Freezing user space processes ... (elapsed 0.17 seconds) done.
[ 291.276098] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 291.276251] Suspending console(s)
[ 291.363215] sd 2:0:1:0: [sda] Synchronizing SCSI cache
[ 291.363431] sd 2:0:1:0: [sda] Stopping disk
[ 292.336924] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 292.353620] [fglrx] firegl_gps_setpowerdown .
[ 292.384507] ACPI: PCI interrupt for device 0000:01:00.0 disabled
[ 292.393982] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 292.414009] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 292.414009] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 292.433416] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 292.433466] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 292.433513] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 292.433561] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 292.453376] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 292.652605] ACPI: Preparing to enter system sleep state S3
[ 292.752546] Disabling non-boot CPUs ...
[ 292.752571] CPU0 attaching NULL sched-domain.
[ 292.752575] CPU1 attaching NULL sched-domain.
[ 292.869368] CPU 1 is now offline
[ 292.869372] SMP alternatives: switching to UP code
[ 292.890179] CPU0 attaching NULL sched-domain.
[ 292.890827] CPU1 is down
[ 292.890931] Extended CMOS year: 2000
[ 292.890931] Intel machine check architecture supported.
[ 292.890937] Intel machine check reporting enabled on CPU#0.
[ 292.890999] Back to C!
[ 292.891290] Extended CMOS year: 2000
[ 292.891386] Enabling non-boot CPUs ...
[ 292.891603] CPU0 attaching NULL sched-domain.
[ 292.891836] SMP alternatives: switching to SMP code
[ 292.901433] Booting processor 1/1 ip 6000
[ 292.909621] Initializing CPU#1
[ 293.049381] Calibrating delay using timer specific routine.. 4322.51 BogoMIPS (lpj=21612570)
[ 293.049381] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 293.049381] CPU: L2 cache: 4096K
[ 293.049381] CPU: Physical Processor ID: 0
[ 293.049381] CPU: Processor Core ID: 1
[ 293.049381] Intel machine check architecture supported.
[ 293.049381] Intel machine check reporting enabled on CPU#1.
[ 293.060072] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 293.060111] CPU0 attaching sched-domain:
[ 293.060114] domain 0: span 0-1
[ 293.060115] groups: 0 1
[ 293.060120] CPU1 attaching sched-domain:
[ 293.060122] domain 0: span 0-1
[ 293.060124] groups: 1 0
[ 293.049381] CPU1 is up
[ 293.199386] Switched to high resolution mode on CPU 1
[ 293.844194] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 293.873763] PM: Writing back config space on device 0000:00:01.0 at offset f (was 80100, writing 8010b)
[ 293.873776] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0)
[ 293.873783] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing 47f14001)
[ 293.873790] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing 50305030)
[ 293.873798] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 3030)
[ 293.873805] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100)
[ 293.873814] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10040)
[ 293.873822] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100007)
[ 293.873859] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 293.873868] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 293.873881] PM: Writing back config space on device 0000:00:07.0 at offset f (was 100, writing 10b)
[ 293.873899] PM: Writing back config space on device 0000:00:07.0 at offset 4 (was 0, writing 50404000)
[ 293.873908] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00000, writing b00002)
[ 293.891076] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
[ 293.891105] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50400004)
[ 293.891144] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 40)
[ 293.891155] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 293.891188] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 293.891199] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 294.071114] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 50515051)
[ 294.071123] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing 50205020)
[ 294.071132] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 2020)
[ 294.071147] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810040)
[ 294.071157] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007)
[ 294.071218] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 294.071227] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 294.071261] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
[ 294.071270] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 50105010)
[ 294.071279] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 200000f0)
[ 294.071293] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810040)
[ 294.071304] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100007)
[ 294.071362] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 294.071371] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 294.071405] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 4bf14801)
[ 294.071414] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing 50004c10)
[ 294.071423] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 1010)
[ 294.071437] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810040)
[ 294.071448] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100007)
[ 294.071505] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 294.071514] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 294.071526] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 294.071537] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 294.071604] usb usb1: root hub lost power or was reset
[ 294.071643] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 294.071654] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 294.071718] usb usb2: root hub lost power or was reset
[ 294.071741] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 294.071752] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 294.071815] usb usb3: root hub lost power or was reset
[ 294.071850] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 294.071860] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 294.071923] usb usb4: root hub lost power or was reset
[ 294.090252] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 294.090263] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 294.090351] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1)
[ 294.090359] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing 4c004c00)
[ 294.090368] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 228000f0)
[ 294.090386] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100000, writing 100007)
[ 294.090417] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 294.090489] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b)
[ 294.090523] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005)
[ 294.090539] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 294.090548] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 294.110186] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20b)
[ 294.110221] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)
[ 294.110248] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 294.110257] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 294.113653] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 294.113665] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 294.122529] [fglrx] firegl_gps_setpowerup .
[ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10b)
[ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fffe0000)
[ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing 2001)
[ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 4, writing 50200004)
[ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 40)
[ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100000, writing 100007)
[ 294.139817] PM: Writing back config space on device 0000:03:00.0 at offset f (was 1ff, writing 10a)
[ 294.140015] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 50100004)
[ 294.140025] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 40)
[ 294.140037] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100007)
[ 294.140085] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 294.140097] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 294.159906] PM: Writing back config space on device 0000:0c:03.0 at offset 5 (was 0, writing 4c000000)
[ 294.159916] PM: Writing back config space on device 0000:0c:03.0 at offset 4 (was 0, writing 4c004000)
[ 294.165525] PM: Writing back config space on device 0000:0c:03.0 at offset 3 (was 0, writing f810)
[ 294.165537] PM: Writing back config space on device 0000:0c:03.0 at offset 1 (was 2100000, writing 2100016)
[ 294.219086] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 294.223432] sd 2:0:1:0: [sda] Starting disk
[ 294.287129] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 294.287134] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out
[ 294.327031] ata1.00: configured for UDMA/66
[ 294.327959] ata1.00: XXX: TUR err_mask=0x1 sense_key=0x6
[ 294.331099] ata1.00: XXX: REQUEST SENSE err_mask=0x0 ASC=0x29 ASCQ=0x0
[ 294.332026] ata1.00: XXX: TUR err_mask=0x1 sense_key=0x2
[ 294.828112] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
[ 294.828118] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out
[ 294.944626] ata3.01: configured for UDMA/100
[ 294.961260] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 294.961260] sd 2:0:1:0: [sda] Write Protect is off
[ 294.961260] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 294.961260] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 295.809712] usb 1-2: reset full speed USB device using uhci_hcd and address 3
[ 295.980239] appletouch: Geyser mode initialized.
[ 296.117657] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 296.278619] applesmc: device has already been initialized (0xe0, 0x00).
[ 296.476854] usb 4-1: reset full speed USB device using uhci_hcd and address 3
[ 296.546579] Restarting tasks ... <6>usb 4-1: USB disconnect, address 3
[ 296.698188] done.
[ 296.754001] appletouch: incomplete data package (first byte: 2, length: 4).
[ 297.690974] usb 4-1: new full speed USB device using uhci_hcd and address 4
[ 297.909457] usb 4-1: configuration #1 chosen from 1 choice
[ 297.944435] input: HID 05ac:1000 as /class/input/input16
[ 297.993146] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 298.026199] input: HID 05ac:1000 as /class/input/input17
[ 298.030185] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 316.096198] end_request: I/O error, dev sr0, sector 84224
[ 316.096214] Buffer I/O error on device sr0, logical block 10528
[ 316.096709] Buffer I/O error on device sr0, logical block 10561
[ 316.096718] Buffer I/O error on device sr0, logical block 10562
[ 316.096726] Buffer I/O error on device sr0, logical block 10563
[ 316.096733] Buffer I/O error on device sr0, logical block 10564
[ 316.096740] Buffer I/O error on device sr0, logical block 10565
[ 316.096747] Buffer I/O error on device sr0, logical block 10566
[ 316.096754] Buffer I/O error on device sr0, logical block 10567
[ 316.096762] Buffer I/O error on device sr0, logical block 10568
[ 316.096769] Buffer I/O error on device sr0, logical block 10569
[ 491.250518] PM: Syncing filesystems ... done.
[ 492.145390] Freezing user space processes ... (elapsed 0.40 seconds) done.
[ 492.550510] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 492.550636] Suspending console(s)
[ 492.631929] sd 2:0:1:0: [sda] Synchronizing SCSI cache
[ 492.632156] sd 2:0:1:0: [sda] Stopping disk
[ 493.601818] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 493.618497] [fglrx] firegl_gps_setpowerdown .
[ 493.648899] ACPI: PCI interrupt for device 0000:01:00.0 disabled
[ 493.649095] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 493.669886] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 493.670069] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 493.689811] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 493.689861] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 493.689908] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 493.689956] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 493.710010] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 493.909790] ACPI: Preparing to enter system sleep state S3
[ 494.009904] Disabling non-boot CPUs ...
[ 494.009932] CPU0 attaching NULL sched-domain.
[ 494.009936] CPU1 attaching NULL sched-domain.
[ 494.137112] CPU 1 is now offline
[ 494.137116] SMP alternatives: switching to UP code
[ 494.159668] CPU0 attaching NULL sched-domain.
[ 494.159668] CPU1 is down
[ 494.159668] Extended CMOS year: 2000
[ 494.159668] Intel machine check architecture supported.
[ 494.159668] Intel machine check reporting enabled on CPU#0.
[ 494.159668] Back to C!
[ 494.159668] Extended CMOS year: 2000
[ 494.159668] Enabling non-boot CPUs ...
[ 494.159668] CPU0 attaching NULL sched-domain.
[ 494.159668] SMP alternatives: switching to SMP code
[ 494.169668] Booting processor 1/1 ip 6000
[ 494.175322] Initializing CPU#1
[ 494.315082] Calibrating delay using timer specific routine.. 4322.58 BogoMIPS (lpj=21612936)
[ 494.315082] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 494.315082] CPU: L2 cache: 4096K
[ 494.315082] CPU: Physical Processor ID: 0
[ 494.315082] CPU: Processor Core ID: 1
[ 494.315082] Intel machine check architecture supported.
[ 494.315082] Intel machine check reporting enabled on CPU#1.
[ 494.325708] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 494.325749] CPU0 attaching sched-domain:
[ 494.325751] domain 0: span 0-1
[ 494.325753] groups: 0 1
[ 494.325757] CPU1 attaching sched-domain:
[ 494.325759] domain 0: span 0-1
[ 494.325760] groups: 1 0
[ 494.315082] CPU1 is up
[ 494.473253] Switched to high resolution mode on CPU 1
[ 495.109895] __ratelimit: 24 messages suppressed
[ 495.109899] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset f (was 80100, writing 8010b)
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0)
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing 47f14001)
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing 50305030)
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 20003030)
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100)
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10040)
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100007)
[ 495.144098] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 495.144098] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 495.144098] PM: Writing back config space on device 0000:00:07.0 at offset f (was 100, writing 10b)
[ 495.144098] PM: Writing back config space on device 0000:00:07.0 at offset 4 (was 0, writing 50404000)
[ 495.144098] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00000, writing b00002)
[ 495.155992] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
[ 495.156551] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50400004)
[ 495.156560] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 40)
[ 495.156571] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 495.156605] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 495.156617] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 495.336139] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 50515051)
[ 495.336149] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing 50205020)
[ 495.336158] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 20002020)
[ 495.336173] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810040)
[ 495.336183] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007)
[ 495.336252] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 495.336262] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 495.336297] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
[ 495.336306] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 50105010)
[ 495.336314] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing f0)
[ 495.336329] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810040)
[ 495.336339] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100007)
[ 495.336397] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 495.336406] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 495.336440] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 4bf14801)
[ 495.336449] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing 50004c10)
[ 495.336458] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 20001010)
[ 495.336473] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810040)
[ 495.336483] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100007)
[ 495.336540] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 495.336549] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 495.336562] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 495.336573] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 495.336640] usb usb1: root hub lost power or was reset
[ 495.336679] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 495.336689] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 495.336753] usb usb2: root hub lost power or was reset
[ 495.336777] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 495.336788] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 495.336852] usb usb3: root hub lost power or was reset
[ 495.336886] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 495.336897] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 495.336961] usb usb4: root hub lost power or was reset
[ 495.355290] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 495.355303] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 495.355524] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1)
[ 495.355533] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing 4c004c00)
[ 495.355542] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 28000f0)
[ 495.355560] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100000, writing 100007)
[ 495.355590] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 495.355663] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b)
[ 495.355696] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005)
[ 495.355713] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 495.355722] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 495.375348] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20b)
[ 495.375382] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)
[ 495.375471] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 495.375481] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 495.378879] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 495.378890] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 495.387754] [fglrx] firegl_gps_setpowerup .
[ 495.393104] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10b)
[ 495.393120] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fffe0000)
[ 495.393143] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing 2001)
[ 495.393156] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 4, writing 50200004)
[ 495.393166] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 40)
[ 495.393178] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100000, writing 40100007)
[ 495.405364] PM: Writing back config space on device 0000:03:00.0 at offset f (was 1ff, writing 10a)
[ 495.405401] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 50100004)
[ 495.405411] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 40)
[ 495.405424] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100007)
[ 495.405472] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 495.405483] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 495.430947] PM: Writing back config space on device 0000:0c:03.0 at offset 5 (was 0, writing 4c000000)
[ 495.430958] PM: Writing back config space on device 0000:0c:03.0 at offset 4 (was 0, writing 4c004000)
[ 495.430968] PM: Writing back config space on device 0000:0c:03.0 at offset 3 (was 0, writing f810)
[ 495.430979] PM: Writing back config space on device 0000:0c:03.0 at offset 1 (was 2100000, writing 2100016)
[ 495.487042] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 495.490273] sd 2:0:1:0: [sda] Starting disk
[ 495.543941] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 495.543947] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out
[ 495.593807] ata1.00: configured for UDMA/66
[ 495.594734] ata1.00: XXX: TUR err_mask=0x1 sense_key=0x6
[ 495.597912] ata1.00: XXX: REQUEST SENSE err_mask=0x0 ASC=0x29 ASCQ=0x0
[ 495.598808] ata1.00: XXX: TUR err_mask=0x1 sense_key=0x2
[ 496.145683] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
[ 496.145690] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out
[ 496.243274] ata3.01: configured for UDMA/100
[ 496.264014] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 496.264014] sd 2:0:1:0: [sda] Write Protect is off
[ 496.264014] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 496.264014] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 497.183977] usb 1-2: reset full speed USB device using uhci_hcd and address 3
[ 497.354409] appletouch: Geyser mode initialized.
[ 497.491873] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 497.710597] applesmc: device has already been initialized (0xe0, 0x00).
[ 497.909789] usb 4-1: reset full speed USB device using uhci_hcd and address 4
[ 498.122210] Restarting tasks ... done.
[ 516.000954] end_request: I/O error, dev sr0, sector 2157768
[ 516.000971] Buffer I/O error on device sr0, logical block 269721
[ 516.004962] Buffer I/O error on device sr0, logical block 269753
[ 516.004971] Buffer I/O error on device sr0, logical block 269754
[ 516.004979] Buffer I/O error on device sr0, logical block 269755
[ 516.004986] Buffer I/O error on device sr0, logical block 269756
[ 516.004994] Buffer I/O error on device sr0, logical block 269757
[ 516.005001] Buffer I/O error on device sr0, logical block 269758
[ 516.005008] Buffer I/O error on device sr0, logical block 269759
[ 516.005016] Buffer I/O error on device sr0, logical block 269760
[ 516.005024] Buffer I/O error on device sr0, logical block 269761
[ 521.154739] __ratelimit: 20690 messages suppressed
[ 521.154751] Buffer I/O error on device sr0, logical block 280084
[ 526.169264] __ratelimit: 22104 messages suppressed
[ 526.169264] Buffer I/O error on device sr0, logical block 291137
[ 531.280360] __ratelimit: 21634 messages suppressed
[ 531.280360] Buffer I/O error on device sr0, logical block 301954
[ 536.437779] __ratelimit: 20655 messages suppressed
[ 536.437792] Buffer I/O error on device sr0, logical block 312282
next prev parent reply other threads:[~2008-06-12 6:16 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-04 5:07 Justin Mattock
2008-04-04 8:21 ` Andrew Morton
2008-04-04 15:05 ` Justin Mattock
2008-06-11 2:00 ` Tejun Heo
2008-06-11 7:45 ` Justin Mattock
2008-06-11 18:31 ` Justin Mattock
2008-06-11 21:51 ` Tejun Heo
2008-06-11 22:27 ` Justin Mattock
2008-06-12 1:18 ` Tejun Heo
2008-06-12 2:10 ` Justin Mattock
2008-06-12 2:13 ` Justin Mattock
2008-06-12 4:15 ` Tejun Heo
2008-06-12 5:22 ` Justin Mattock
2008-06-12 6:15 ` Justin Mattock [this message]
2008-06-12 6:26 ` Tejun Heo
2008-06-12 6:36 ` Justin Mattock
2008-06-12 6:59 ` Tejun Heo
2008-06-12 7:45 ` Justin Mattock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dd18b0c30806112315x70dee219oa6738de3e22d4939@mail.gmail.com \
--to=justinmattock@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=htejun@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®