[PATCH 0/7] arm64: defconfig: Enable various configs for TI platforms

[PATCH 0/7] arm64: defconfig: Enable various configs for TI platforms

[Udit Kumar]

This patch series enables various config options needed by TI Platform.

bloat-o-meter reports after this change
add/remove: 4/0 grow/shrink: 2/0 up/down: 1592/0 (1592)
[...]
Total: Before=27997071, After=27998663, chg +0.01%



Aradhya Bhatia (1):
  arm64: defconfig: Enable PWM drivers for TI ECAP

Hari Nagalla (1):
  arm64: defconfig: enable TI OMAP2 mailbox and K3 remote proc drivers

Jayesh Choudhary (1):
  arm64: defconfig: Enable SND_SOC_J721E_EVM for audio support

Judith Mendez (1):
  arm64: defconfig: Enable MCAN driver

MD Danish Anwar (1):
  arm64: defconfig: Enable DP83869 Driver

Udit Kumar (2):
  arm64: defconfig: Enable UFS config
  arm64: defconfig: Enable K3 RTI Watchdog

 arch/arm64/configs/defconfig | 13 +++++++++++++
 1 file changed, 13 insertions(+)

-- 
2.34.1

[PATCH 1/7] arm64: defconfig: Enable PWM drivers for TI ECAP

[Udit Kumar]

From: Aradhya Bhatia <a-bhatia1@ti.com>

TI's K3 SoCs uses the Enhanced high resolution PWM (EHRPWM) and
the Enhanced Capture (ECAP) modules for generating PWM signals,
which are used in various applications.

One such example is controlling the backlight power of the display
panels connected to the am642, am65 iot2050 EVMs boards.

This patch enables TI ECAP to be built as module.

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 6cbf6eb59378..089e71f5bb7a 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1356,6 +1356,7 @@ CONFIG_PWM_SAMSUNG=y
 CONFIG_PWM_SL28CPLD=m
 CONFIG_PWM_SUN4I=m
 CONFIG_PWM_TEGRA=m
+CONFIG_PWM_TIECAP=m
 CONFIG_PWM_TIEHRPWM=m
 CONFIG_PWM_VISCONTI=m
 CONFIG_SL28CPLD_INTC=y
-- 
2.34.1

[PATCH 2/7] arm64: defconfig: enable TI OMAP2 mailbox and K3 remote proc drivers

[Udit Kumar]

From: Hari Nagalla <hnagalla@ti.com>

Enable TI OMAP2 mailbox driver. This driver is used in TI K3 platforms
as well for communications with remote processors.
Also enable Cortex R5 and TI DSP (C66x,C71x) remote proc drivers as modules.

Needed by AM64, J7200,J721E and J784S4 platforms.

Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 089e71f5bb7a..a2a03b4ae834 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1230,6 +1230,7 @@ CONFIG_TEGRA186_TIMER=y
 CONFIG_RENESAS_OSTM=y
 CONFIG_ARM_MHU=y
 CONFIG_IMX_MBOX=y
+CONFIG_OMAP2PLUS_MBOX=m
 CONFIG_PLATFORM_MHU=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_QCOM_APCS_IPC=y
@@ -1242,6 +1243,8 @@ CONFIG_MTK_IOMMU=y
 CONFIG_QCOM_IOMMU=y
 CONFIG_REMOTEPROC=y
 CONFIG_IMX_REMOTEPROC=y
+CONFIG_TI_K3_R5_REMOTEPROC=m
+CONFIG_TI_K3_DSP_REMOTEPROC=m
 CONFIG_MTK_SCP=m
 CONFIG_QCOM_Q6V5_ADSP=m
 CONFIG_QCOM_Q6V5_MSS=m
-- 
2.34.1

[PATCH 3/7] arm64: defconfig: Enable DP83869 Driver

[Udit Kumar]

From: MD Danish Anwar <danishanwar@ti.com>

Enable GPIO multiplexer and DP83869 driver to support selection of
second PHY for AM64x EVM.

Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm64/configs/defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index a2a03b4ae834..632cc6101d3c 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -375,6 +375,7 @@ CONFIG_AT803X_PHY=y
 CONFIG_REALTEK_PHY=y
 CONFIG_ROCKCHIP_PHY=y
 CONFIG_DP83867_PHY=y
+CONFIG_DP83869_PHY=m
 CONFIG_DP83TD510_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_CAN_FLEXCAN=m
@@ -1445,6 +1446,7 @@ CONFIG_FPGA_REGION=m
 CONFIG_OF_FPGA_REGION=m
 CONFIG_TEE=y
 CONFIG_OPTEE=y
+CONFIG_MUX_GPIO=m
 CONFIG_MUX_MMIO=y
 CONFIG_SLIMBUS=m
 CONFIG_SLIM_QCOM_CTRL=m
-- 
2.34.1

[PATCH 4/7] arm64: defconfig: Enable SND_SOC_J721E_EVM for audio support

[Udit Kumar]

From: Jayesh Choudhary <j-choudhary@ti.com>

Enable CONFIG_SND_SOC_J721E_EVM which is required to enable
audio in J721E Platform.

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 632cc6101d3c..28c03799d1e0 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -928,6 +928,7 @@ CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
 CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
 CONFIG_SND_SOC_PCM3168A_I2C=m
 CONFIG_SND_SOC_RT5640=m
+CONFIG_SND_SOC_J721E_EVM=m
 CONFIG_SND_SOC_RT5659=m
 CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
 CONFIG_SND_SOC_SIMPLE_MUX=m
-- 
2.34.1

Re: [PATCH 4/7] arm64: defconfig: Enable SND_SOC_J721E_EVM for audio support

[Krzysztof Kozlowski]

On 25/07/2023 12:53, Udit Kumar wrote:
> From: Jayesh Choudhary <j-choudhary@ti.com>
> 
> Enable CONFIG_SND_SOC_J721E_EVM which is required to enable
> audio in J721E Platform.
> 
> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> Signed-off-by: Udit Kumar <u-kumar1@ti.com>
> ---

Do not enable configs one-by-one. Squash most of your patches.

Best regards,
Krzysztof

[PATCH 5/7] arm64: defconfig: Enable MCAN driver

[Udit Kumar]

From: Judith Mendez <jm@ti.com>

Enable CAN_M_CAN and CAN_M_CAN_PLATFORM to be built
as modules by default.
CAN is used in AM68 SK, J721E EVM, J721S2, AM642
AM642-Phyboards.

Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm64/configs/defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 28c03799d1e0..743c165e31a4 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -180,6 +180,8 @@ CONFIG_NET_ACT_GATE=m
 CONFIG_QRTR_SMD=m
 CONFIG_QRTR_TUN=m
 CONFIG_CAN=m
+CONFIG_CAN_M_CAN=m
+CONFIG_CAN_M_CAN_PLATFORM=m
 CONFIG_BT=m
 CONFIG_BT_HIDP=m
 # CONFIG_BT_LE is not set
-- 
2.34.1

Re: [PATCH 5/7] arm64: defconfig: Enable MCAN driver

[Judith Mendez]

Hi Udit,

On 7/25/23 5:53 AM, Udit Kumar wrote:
> From: Judith Mendez <jm@ti.com>
> 
> Enable CAN_M_CAN and CAN_M_CAN_PLATFORM to be built
> as modules by default.
> CAN is used in AM68 SK, J721E EVM, J721S2, AM642
> AM642-Phyboards.
> 
> Signed-off-by: Judith Mendez <jm@ti.com>
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> Signed-off-by: Udit Kumar <u-kumar1@ti.com>
> ---
>   arch/arm64/configs/defconfig | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 28c03799d1e0..743c165e31a4 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -180,6 +180,8 @@ CONFIG_NET_ACT_GATE=m
>   CONFIG_QRTR_SMD=m
>   CONFIG_QRTR_TUN=m
>   CONFIG_CAN=m
> +CONFIG_CAN_M_CAN=m
> +CONFIG_CAN_M_CAN_PLATFORM=m
>   CONFIG_BT=m
>   CONFIG_BT_HIDP=m
>   # CONFIG_BT_LE is not set

Was about to send this patch as well. Thanks for sending!

~ Judith

[PATCH 6/7] arm64: defconfig: Enable UFS config

[Udit Kumar]

This patch enables UFS BSG device node.

Also enable CDNS and TI UFS drivers as modules,
needed for UFS feature on TI platform J721E EVM .

Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 743c165e31a4..63ca68081139 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1052,10 +1052,13 @@ CONFIG_MMC_SDHCI_XENON=y
 CONFIG_MMC_SDHCI_AM654=y
 CONFIG_MMC_OWL=y
 CONFIG_SCSI_UFSHCD=y
+CONFIG_SCSI_UFS_BSG=y
 CONFIG_SCSI_UFSHCD_PLATFORM=y
+CONFIG_SCSI_UFS_CDNS_PLATFORM=m
 CONFIG_SCSI_UFS_QCOM=m
 CONFIG_SCSI_UFS_HISI=y
 CONFIG_SCSI_UFS_RENESAS=m
+CONFIG_SCSI_UFS_TI_J721E=m
 CONFIG_SCSI_UFS_EXYNOS=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-- 
2.34.1

[PATCH 7/7] arm64: defconfig: Enable K3 RTI Watchdog

[Udit Kumar]

TI's K3 SOC Family has RTI (Real Time Interrupt) watchdog
timer.

This patch enables TI RTI watchdog driver to be built as module.

RTI watchdog are supported on AM62, AM62A, AM64, AM65,
J721E and J7200 TI SOC.

Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 63ca68081139..dedf1bd9c29f 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -690,6 +690,7 @@ CONFIG_UNIPHIER_WATCHDOG=y
 CONFIG_PM8916_WATCHDOG=m
 CONFIG_BCM2835_WDT=y
 CONFIG_BCM7038_WDT=m
+CONFIG_K3_RTI_WATCHDOG=m
 CONFIG_MFD_ALTERA_SYSMGR=y
 CONFIG_MFD_BD9571MWV=y
 CONFIG_MFD_AXP20X_I2C=y
-- 
2.34.1

Re: [PATCH 0/7] arm64: defconfig: Enable various configs for TI platforms

[Arnd Bergmann]

On Tue, Jul 25, 2023, at 12:53, Udit Kumar wrote:
> This patch series enables various config options needed by TI Platform.
>
> bloat-o-meter reports after this change
> add/remove: 4/0 grow/shrink: 2/0 up/down: 1592/0 (1592)
> [...]
> Total: Before=27997071, After=27998663, chg +0.01%

This all look good to me, I assume Nishanth or Vignesh will pick
them up into their git tree and send them to soc@kernel.org in
their coming pull requests.

    Arnd