Re: [PATCH resend v1 2/7] pps: clients: gpio: Use dev_err_probe() to avoid log noise

[Rodolfo Giometti <giometti@enneenne.com>]

On 09/03/21 12:23, Andy Shevchenko wrote:
> When GPIO APIs return -EPROBE_DEFER there is no need to print the message,
> especially taking into consideration that it may repeat several times.
> Use dev_err_probe() to avoid log noise in such cases.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/pps/clients/pps-gpio.c | 15 ++++++---------
>  1 file changed, 6 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c
> index f89c31aa66f1..78c9680e8063 100644
> --- a/drivers/pps/clients/pps-gpio.c
> +++ b/drivers/pps/clients/pps-gpio.c
> @@ -110,19 +110,16 @@ static int pps_gpio_setup(struct platform_device *pdev)
>  	data->gpio_pin = devm_gpiod_get(&pdev->dev,
>  		NULL,	/* request "gpios" */
>  		GPIOD_IN);
> -	if (IS_ERR(data->gpio_pin)) {
> -		dev_err(&pdev->dev,
> -			"failed to request PPS GPIO\n");
> -		return PTR_ERR(data->gpio_pin);
> -	}
> +	if (IS_ERR(data->gpio_pin))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(data->gpio_pin),
> +				     "failed to request PPS GPIO\n");
>  
>  	data->echo_pin = devm_gpiod_get_optional(&pdev->dev,
>  			"echo",
>  			GPIOD_OUT_LOW);
> -	if (IS_ERR(data->echo_pin)) {
> -		dev_err(&pdev->dev, "failed to request ECHO GPIO\n");
> -		return PTR_ERR(data->echo_pin);
> -	}
> +	if (IS_ERR(data->echo_pin))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(data->echo_pin),
> +				     "failed to request ECHO GPIO\n");
>  
>  	if (data->echo_pin) {
>  		ret = of_property_read_u32(np,
> 

Acked-by: Rodolfo Giometti <giometti@enneenne.com>

-- 
GNU/Linux Solutions                  e-mail: giometti@enneenne.com
Linux Device Driver                          giometti@linux.it
Embedded Systems                     phone:  +39 349 2432127
UNIX programming                     skype:  rodolfo.giometti