Re: [PATCH v3 13/26] x86/virt/seamldr: Allocate and populate a module update request

["Huang, Kai" <kai.huang@intel.com>]

> +/*
> + * Allocate and populate a seamldr_params.
> + * Note that both @module and @sig should be vmalloc'd memory.

Nit:

How about actually using is_vmalloc_addr() to check in the code rather than
documenting in the comment?

I see you have already checked the overall 'data' buffer is vmalloc()'ed in
seamldr_install_module() so the 'module' and 'sig' (part of 'data') must be
too.  But since is_vmalloc_addr() is cheap so I think it's also fine to do
the check here.  We can also WARN() so it can be used to catch bug.

> + */
> +static struct seamldr_params *alloc_seamldr_params(const void *module, unsigned int module_size,
> +						   const void *sig, unsigned int sig_size)
> +{
> 

[...]

> +	ptr = module;
> +	for (i = 0; i < params->num_module_pages; i++) {
> +		params->mod_pages_pa_list[i] = (vmalloc_to_pfn(ptr) << PAGE_SHIFT) +
> +					       ((unsigned long)ptr & ~PAGE_MASK);
> +		ptr += SZ_4K;
> +	}
> +
> +	return params;
> +}
> 

[...]

> +/*
> + * Verify that the checksum of the entire blob is zero. The checksum is
> + * calculated by summing up all 16-bit words, with carry bits dropped.
> + */
> +static bool verify_checksum(const struct tdx_blob *blob)
> +{
> +	u32 size = blob->len;
> +	u16 checksum = 0;
> +	const u16 *p;
> +	int i;
> +
> +	/* Handle the last byte if the size is odd */
> +	if (size % 2) {
> +		checksum += *((const u8 *)blob + size - 1);
> +		size--;
> +	}
> +
> +	p = (const u16 *)blob;
> +	for (i = 0; i < size; i += 2) {
> +		checksum += *p;
> +		p++;
> +	}
> +
> +	return !checksum;
> +}
> +
> +static struct seamldr_params *init_seamldr_params(const u8 *data, u32 size)
> +{
> 

[...]

> +	if (!verify_checksum(blob)) {
> +		pr_err("invalid checksum\n");
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	return alloc_seamldr_params(module, module_size, sig, sig_size);
> +}

It's weird that we have do verify checksum manually, because hardware
normally catches that.

I suppose this is because we want to catch as many errors as possible before
actually asking P-SEAMLDR to do module update, since in order to do which we
have to shutdown the existing module first and there's no returning point
once we reach that?

If so a comment would be helpful.

Also, it's also weird that you have to write code for checksum on your own.
I guess the kernel should already have some library code for that.

I checked and it _seems_ the code in lib/checksum.c could be used?

I am not expert though, but I think we should use kernel lib code when we
can.