From: Faisal Hassan <faisal.hassan@oss.qualcomm.com>
To: linux-usb@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>,
Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>,
Sriram Dash <sriram.dash@oss.qualcomm.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 2/7] usb: dwc3: qcom: Distinguish PM and runtime suspend/resume paths
Date: Thu, 29 Oct 2026 00:29:32 +0530 [thread overview]
Message-ID: <e39a38d334b5276d8a47b917b1f0fcd0a32bcfe9.1793212717.git.faisal.hassan@oss.qualcomm.com> (raw)
In-Reply-To: <cover.1793212717.git.faisal.hassan@oss.qualcomm.com>
The dwc3_qcom_suspend() and dwc3_qcom_resume() functions
handle both system PM and runtime PM paths but cannot
differentiate between them, preventing distinct power
management strategies.
Refactor suspend/resume functions to accept pm_message_t
instead of boolean wakeup flags. Use PMSG_IS_AUTO()
to identify runtime PM (PMSG_AUTO_SUSPEND/RESUME) versus
system PM (PMSG_SUSPEND/RESUME) paths.
Preserve existing wakeup behavior: always enable wakeup
for runtime suspend, check device_may_wakeup() for system
suspend.
Follow dwc3/core.c pattern to enable future per-path
strategies like differentiated power states.
Co-developed-by: Sriram Dash <sriram.dash@oss.qualcomm.com>
Signed-off-by: Sriram Dash <sriram.dash@oss.qualcomm.com>
Signed-off-by: Faisal Hassan <faisal.hassan@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
---
drivers/usb/dwc3/dwc3-qcom.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index d4fda4dd81f6..508b1ee7cd0f 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -346,14 +346,24 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
qcom->wakeup_irqs_armed = true;
}
-static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
+static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, pm_message_t msg)
{
u32 val;
int i, ret;
+ bool wakeup;
if (qcom->is_suspended)
return 0;
+ /*
+ * For runtime suspend, always enable wakeup.
+ * For system suspend, check device wakeup capability.
+ */
+ if (PMSG_IS_AUTO(msg))
+ wakeup = true;
+ else
+ wakeup = device_may_wakeup(qcom->dev);
+
for (i = 0; i < qcom->num_ports; i++) {
val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg[i]);
if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
@@ -380,7 +390,7 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
return 0;
}
-static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
+static int dwc3_qcom_resume(struct dwc3_qcom *qcom, pm_message_t msg)
{
int ret;
int i;
@@ -766,14 +776,13 @@ static int dwc3_qcom_pm_suspend(struct device *dev)
{
struct dwc3 *dwc = dev_get_drvdata(dev);
struct dwc3_qcom *qcom = to_dwc3_qcom(dwc);
- bool wakeup = device_may_wakeup(dev);
int ret;
ret = dwc3_pm_suspend(&qcom->dwc);
if (ret)
return ret;
- ret = dwc3_qcom_suspend(qcom, wakeup);
+ ret = dwc3_qcom_suspend(qcom, PMSG_SUSPEND);
if (ret)
return ret;
@@ -786,10 +795,9 @@ static int dwc3_qcom_pm_resume(struct device *dev)
{
struct dwc3 *dwc = dev_get_drvdata(dev);
struct dwc3_qcom *qcom = to_dwc3_qcom(dwc);
- bool wakeup = device_may_wakeup(dev);
int ret;
- ret = dwc3_qcom_resume(qcom, wakeup);
+ ret = dwc3_qcom_resume(qcom, PMSG_RESUME);
if (ret)
return ret;
@@ -826,7 +834,7 @@ static int dwc3_qcom_runtime_suspend(struct device *dev)
if (ret)
return ret;
- return dwc3_qcom_suspend(qcom, true);
+ return dwc3_qcom_suspend(qcom, PMSG_AUTO_SUSPEND);
}
static int dwc3_qcom_runtime_resume(struct device *dev)
@@ -835,7 +843,7 @@ static int dwc3_qcom_runtime_resume(struct device *dev)
struct dwc3_qcom *qcom = to_dwc3_qcom(dwc);
int ret;
- ret = dwc3_qcom_resume(qcom, true);
+ ret = dwc3_qcom_resume(qcom, PMSG_AUTO_RESUME);
if (ret)
return ret;
--
2.34.1
next prev parent reply other threads:[~2026-10-28 18:59 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1793212717.git.faisal.hassan@oss.qualcomm.com>
2026-10-28 18:59 ` [PATCH v4 1/7] usb: dwc3: qcom: Keep wakeup IRQ enable/disable balanced on failed resume Faisal Hassan
2026-10-30 9:24 ` Peter Chen
2026-10-30 11:24 ` Faisal Hassan
2026-11-02 2:21 ` Peter Chen
2026-11-04 5:59 ` Faisal Hassan
2026-10-28 18:59 ` Faisal Hassan [this message]
2026-11-02 4:47 ` [PATCH v4 2/7] usb: dwc3: qcom: Distinguish PM and runtime suspend/resume paths Krishna Kurapati
2026-10-28 18:59 ` [PATCH v4 3/7] dt-bindings: usb: Add qcom,sa8255p-dwc3 for firmware-managed resources Faisal Hassan
2026-10-29 8:02 ` Krzysztof Kozlowski
2026-10-28 18:59 ` [PATCH v4 4/7] usb: host: xhci-plat: Support XHCI_RESET_ON_RESUME via device property Faisal Hassan
2026-10-30 9:29 ` Peter Chen
2026-10-28 18:59 ` [PATCH v4 5/7] usb: dwc3: qcom: Support broken suspend for SA8255P Faisal Hassan
2026-11-02 3:32 ` Peter Chen
2026-11-04 5:59 ` Faisal Hassan
2026-10-28 18:59 ` [PATCH v4 6/7] usb: dwc3: qcom: Support firmware-managed resource states for power management Faisal Hassan
2026-11-02 6:20 ` Peter Chen
2026-11-04 5:59 ` Faisal Hassan
2026-10-28 18:59 ` [PATCH v4 7/7] usb: dwc3: qcom: Enable VBUS override at probe for default peripheral role Faisal Hassan
2026-11-02 6:36 ` Peter Chen
2026-11-04 5:58 ` Faisal Hassan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e39a38d334b5276d8a47b917b1f0fcd0a32bcfe9.1793212717.git.faisal.hassan@oss.qualcomm.com \
--to=faisal.hassan@oss.qualcomm.com \
--cc=Thinh.Nguyen@synopsys.com \
--cc=gregkh@linuxfoundation.org \
--cc=krishna.kurapati@oss.qualcomm.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=sriram.dash@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®