From: Akhil P Oommen <quic_akhilpo@quicinc.com>
To: Neil Armstrong <neil.armstrong@linaro.org>,
Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
Konrad Dybcio <konradybcio@kernel.org>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
"Dmitry Baryshkov" <dmitry.baryshkov@linaro.org>,
Marijn Suijten <marijn.suijten@somainline.org>,
David Airlie <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>,
Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>,
<dri-devel@lists.freedesktop.org>,
<freedreno@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>
Subject: Re: [PATCH v4 6/7] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU
Date: Mon, 9 Dec 2024 18:32:26 +0530 [thread overview]
Message-ID: <e56cd9bf-8fa7-44b0-b00f-45cedb73e194@quicinc.com> (raw)
In-Reply-To: <20241205-topic-sm8x50-gpu-bw-vote-v4-6-9650d15dd435@linaro.org>
On 12/5/2024 8:31 PM, Neil Armstrong wrote:
> Each GPU OPP requires a specific peak DDR bandwidth, let's add
> those to each OPP and also the related interconnect path.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
I haven't checked each bw value, still
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
-Akhil
> ---
> arch/arm64/boot/dts/qcom/sm8550.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index e7774d32fb6d2288748ecec00bf525b2b3c40fbb..955f58b2cb4e4ca3fd33f1555e36a15cfc82d642 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -14,6 +14,7 @@
> #include <dt-bindings/firmware/qcom,scm.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interconnect/qcom,icc.h>
> #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
> #include <dt-bindings/mailbox/qcom-ipcc.h>
> #include <dt-bindings/power/qcom-rpmpd.h>
> @@ -2114,6 +2115,10 @@ gpu: gpu@3d00000 {
> qcom,gmu = <&gmu>;
> #cooling-cells = <2>;
>
> + interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "gfx-mem";
> +
> status = "disabled";
>
> zap-shader {
> @@ -2127,41 +2132,49 @@ gpu_opp_table: opp-table {
> opp-680000000 {
> opp-hz = /bits/ 64 <680000000>;
> opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> + opp-peak-kBps = <16500000>;
> };
>
> opp-615000000 {
> opp-hz = /bits/ 64 <615000000>;
> opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
> + opp-peak-kBps = <16500000>;
> };
>
> opp-550000000 {
> opp-hz = /bits/ 64 <550000000>;
> opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> + opp-peak-kBps = <12449218>;
> };
>
> opp-475000000 {
> opp-hz = /bits/ 64 <475000000>;
> opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
> + opp-peak-kBps = <8171875>;
> };
>
> opp-401000000 {
> opp-hz = /bits/ 64 <401000000>;
> opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> + opp-peak-kBps = <6671875>;
> };
>
> opp-348000000 {
> opp-hz = /bits/ 64 <348000000>;
> opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
> + opp-peak-kBps = <6074218>;
> };
>
> opp-295000000 {
> opp-hz = /bits/ 64 <295000000>;
> opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
> + opp-peak-kBps = <6074218>;
> };
>
> opp-220000000 {
> opp-hz = /bits/ 64 <220000000>;
> opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
> + opp-peak-kBps = <6074218>;
> };
> };
> };
>
next prev parent reply other threads:[~2024-12-09 13:02 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-05 15:01 [PATCH v4 0/7] drm/msm: adreno: add support for DDR bandwidth scaling via GMU Neil Armstrong
2024-12-05 15:01 ` [PATCH v4 1/7] drm/msm: adreno: add defines for gpu & gmu frequency table sizes Neil Armstrong
2024-12-05 15:01 ` [PATCH v4 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU Neil Armstrong
2024-12-09 12:07 ` Akhil P Oommen
2024-12-05 15:01 ` [PATCH v4 3/7] drm/msm: adreno: dynamically generate GMU bw table Neil Armstrong
2024-12-09 12:11 ` Akhil P Oommen
2024-12-09 14:06 ` Neil Armstrong
2024-12-05 15:01 ` [PATCH v4 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index Neil Armstrong
2024-12-09 12:28 ` Akhil P Oommen
2024-12-05 15:01 ` [PATCH v4 5/7] drm/msm: adreno: enable GMU bandwidth for A740 and A750 Neil Armstrong
2024-12-09 12:59 ` Akhil P Oommen
2024-12-05 15:01 ` [PATCH v4 6/7] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU Neil Armstrong
2024-12-09 13:02 ` Akhil P Oommen [this message]
2024-12-09 13:10 ` Akhil P Oommen
2024-12-09 14:06 ` Neil Armstrong
2024-12-05 15:01 ` [PATCH v4 7/7] arm64: qcom: dts: sm8650: " Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e56cd9bf-8fa7-44b0-b00f-45cedb73e194@quicinc.com \
--to=quic_akhilpo@quicinc.com \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_abhinavk@quicinc.com \
--cc=robdclark@gmail.com \
--cc=robh@kernel.org \
--cc=sean@poorly.run \
--cc=simona@ffwll.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®