From: Guenter Roeck <linux@roeck-us.net>
To: Sam Protsenko <semen.protsenko@linaro.org>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH 4/7] watchdog: s3c2410: Add support for WDT counter enable
Date: Thu, 28 Oct 2021 17:16:13 -0700 [thread overview]
Message-ID: <e69282af-738b-e56e-026a-1e3adcec6a51@roeck-us.net> (raw)
In-Reply-To: <20211028183527.3050-5-semen.protsenko@linaro.org>
On 10/28/21 11:35 AM, Sam Protsenko wrote:
> On new Exynos chips (like Exynos850) WDT counter must be enabled to make
> WDT functional. It's done via CLUSTERx_NONCPU_OUT register, in
> CNT_EN_WDT bit. Add infrastructure needed to enable that counter.
>
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> ---
> drivers/watchdog/s3c2410_wdt.c | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index 7c163a257d3c..a5ef7171a90e 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -97,12 +97,16 @@ struct s3c2410_wdt;
> * @rst_stat_reg: Offset in pmureg for the register that has the reset status.
> * @rst_stat_bit: Bit number in the rst_stat register indicating a watchdog
> * reset.
> + * @cnt_en_reg: Offset in pmureg for the register that enables WDT counter.
> + * @cnt_en_bit: Bit number for "watchdog counter enable" in cnt_en register.
> * @quirks: A bitfield of quirks.
> * @disable_auto_reset: If set, this function will be called to disable
> * automatic setting the WDT as a reset reason in RST_STAT on CPU reset; uses
> * disable_reg field.
> * @mask_reset: If set, this function will be called to mask WDT reset request;
> * uses mask_reset_reg and mask_bit fields.
> + * @enable_counter: If set, this function will be called to enable WDT counter;
> + * uses cnt_en_reg and cnt_en_bit fields.
> */
>
> struct s3c2410_wdt_variant {
> @@ -111,9 +115,12 @@ struct s3c2410_wdt_variant {
> int mask_bit;
> int rst_stat_reg;
> int rst_stat_bit;
> + int cnt_en_reg;
> + int cnt_en_bit;
> u32 quirks;
> int (*disable_auto_reset)(struct s3c2410_wdt *wdt, bool mask);
> int (*mask_reset)(struct s3c2410_wdt *wdt, bool mask);
> + int (*enable_counter)(struct s3c2410_wdt *wdt, bool mask);
Unless there are different enable functions in the future,
the function is unnecessary. This can be handled as feature bit.
> };
>
> struct s3c2410_wdt {
> @@ -132,6 +139,7 @@ struct s3c2410_wdt {
>
> static int s3c2410wdt_disable_wdt_reset(struct s3c2410_wdt *wdt, bool mask);
> static int s3c2410wdt_mask_wdt_reset(struct s3c2410_wdt *wdt, bool mask);
> +static int s3c2410wdt_enable_counter(struct s3c2410_wdt *wdt, bool en);
>
> static const struct s3c2410_wdt_variant drv_data_s3c2410 = {
> .quirks = 0
> @@ -246,6 +254,20 @@ static int s3c2410wdt_mask_wdt_reset(struct s3c2410_wdt *wdt, bool mask)
> return ret;
> }
>
> +static int s3c2410wdt_enable_counter(struct s3c2410_wdt *wdt, bool en)
> +{
> + const u32 mask_val = 1 << wdt->drv_data->cnt_en_bit;
BIT()
> + const u32 val = en ? mask_val : 0;
> + int ret;
> +
> + ret = regmap_update_bits(wdt->pmureg, wdt->drv_data->cnt_en_reg,
> + mask_val, val);
> + if (ret < 0)
> + dev_err(wdt->dev, "failed to update reg(%d)\n", ret);
> +
> + return ret;
> +}
> +
> static int s3c2410wdt_enable(struct s3c2410_wdt *wdt, bool en)
> {
> int ret;
> @@ -262,6 +284,12 @@ static int s3c2410wdt_enable(struct s3c2410_wdt *wdt, bool en)
> return ret;
> }
>
> + if (wdt->drv_data->enable_counter) {
> + ret = wdt->drv_data->enable_counter(wdt, en);
> + if (ret < 0)
> + return ret;
> + }
> +
> return 0;
> }
>
>
next prev parent reply other threads:[~2021-10-29 0:16 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-28 18:35 [PATCH 0/7] watchdog: s3c2410: Add Exynos850 support Sam Protsenko
2021-10-28 18:35 ` [PATCH 1/7] dt-bindings: watchdog: Require samsung,syscon-phandle for Exynos7 Sam Protsenko
2021-10-29 7:55 ` Krzysztof Kozlowski
2021-10-28 18:35 ` [PATCH 2/7] dt-bindings: watchdog: Document Exynos850 watchdog bindings Sam Protsenko
2021-10-29 8:02 ` Krzysztof Kozlowski
2021-10-29 17:48 ` Sam Protsenko
2021-10-28 18:35 ` [PATCH 3/7] watchdog: s3c2410: Make reset disable optional Sam Protsenko
2021-10-29 0:16 ` Guenter Roeck
2021-10-29 8:04 ` Krzysztof Kozlowski
2021-10-29 19:25 ` Sam Protsenko
2021-10-29 19:23 ` Sam Protsenko
2021-10-28 18:35 ` [PATCH 4/7] watchdog: s3c2410: Add support for WDT counter enable Sam Protsenko
2021-10-29 0:16 ` Guenter Roeck [this message]
2021-10-29 20:44 ` Sam Protsenko
2021-10-28 18:35 ` [PATCH 5/7] watchdog: s3c2410: Introduce separate source clock Sam Protsenko
2021-10-29 0:21 ` Guenter Roeck
2021-10-30 12:39 ` Sam Protsenko
2021-10-29 8:18 ` Krzysztof Kozlowski
2021-10-30 14:12 ` Sam Protsenko
2021-10-28 18:35 ` [PATCH 6/7] watchdog: s3c2410: Add Exynos850 support Sam Protsenko
2021-10-28 18:35 ` [PATCH 7/7] watchdog: s3c2410: Let kernel kick watchdog Sam Protsenko
2021-10-29 0:30 ` Guenter Roeck
2021-10-30 14:29 ` Sam Protsenko
2021-10-30 15:14 ` Guenter Roeck
2021-10-30 16:59 ` Sam Protsenko
2021-10-30 17:47 ` Guenter Roeck
2021-10-30 19:25 ` Sam Protsenko
2021-10-29 8:20 ` Krzysztof Kozlowski
2021-10-30 14:59 ` Sam Protsenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e69282af-738b-e56e-026a-1e3adcec6a51@roeck-us.net \
--to=linux@roeck-us.net \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=semen.protsenko@linaro.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®