Re: [PATCH v2] arm64: dts: qcom: glymur-crd: Move common board nodes to shared DTSI

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 6/8/26 12:03 PM, Gopikrishna Garmidi wrote:
> 
> 
> On 5/19/2026 7:55 PM, Gopikrishna Garmidi wrote:
>> The Glymur and Mahua CRDs use the same board-level hardware for the
>> eDP display panel, MDSS DP3 controller and PHY, USB-C ports (via
>> pmic-glink), USB 0/1/HS/MP controllers, QMP PHYs, eUSB2 repeaters,
>> HID peripherals (touchpad, keyboard, touchscreen) and their dependent
>> regulators and pin control states. This has been verified against
>> both CRD schematics.
>>
>> Move these nodes from glymur-crd.dts to glymur-crd.dtsi to enable code
>> reuse with the Mahua CRD.
>>
>> Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
>> ---
>> Changes in v2:
>> - Rebased on top of next-20260518
>> - Updated subject to include glymur-crd scope prefix
>> - Rewrote commit message to describe the actual shared physical hardware
>>    rather than the code-sharing intent; the commonality was verified
>>    against Glymur CRD and Mahua CRD schematics
>> - Link to v1: https://lore.kernel.org/r/20260326-glymur-mahua-common-nodes-v1-1-12bb26920ea4@oss.qualcomm.com
>> ---
>>   arch/arm64/boot/dts/qcom/glymur-crd.dts  | 399 -------------------------------
>>   arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 396 ++++++++++++++++++++++++++++++
>>   2 files changed, 396 insertions(+), 399 deletions(-)
> 
> 
> Hi Krzysztof, Konrad,
> 
> This has been waiting for a while now and already has a Reviewed-by from Dmitry. Could you take a look when you get a chance?

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad