Re: [PATCH] scsi: wd719x Replace GFP_KERNEL with GFP_ATOMIC in wd719x_chip_init

[Douglas Gilbert <dgilbert@interlog.com>]

On 2019-01-14 10:29 a.m., Christoph Hellwig wrote:
> On Mon, Jan 14, 2019 at 11:24:49PM +0800, wangbo wrote:
>> wd719x_host_reset get spinlock first then call wd719x_chip_init,
>> so replace GFP_KERNEL with GFP_ATOMIC in wd719x_chip_init.
> 
> Please move the allocation outside the lock instead.  GFP_ATOMIC
> DMA allocations are generally a bad idea and should be avoided where
> we can.
> 
> More importantly we should never actually trigger the allocation
> under the lock as far as fw_virt will always be set already
> in that case.
> 
> So I think you can safely move the request firmware + allocation
> + memcpy from wd719x_chip_init to wd719x_board_found, but I'd rather
> have Ondrej review that plan.

Further to this, the result of holding a lock (probably with _irqsave()
tacked onto it) during a GFP_KERNEL is a message like this in the log:
    hrtimer: interrupt took 1084 ns

It is not always easy to find since it is a "_once" message. The sg v3
driver (the one in production) produces these. I have been able to stamp
them out by taking care in the sg v4 driver (in testing) around
allocations. It also meant adding a new state in my state machine to
fend off "bad things" happening to that object while it is unlocked.
So there may be a cost to dropping the lock.

Doug Gilbert