* [PATCH wireless-next] wifi: mt7601u: add vnd_reset parameter to fix probe failure on Tenda U2
@ 2026-09-06 20:20 Herman Semenoff
2026-09-06 20:44 ` Bitterblue Smith
0 siblings, 1 reply; 3+ messages in thread
From: Herman Semenoff @ 2026-09-06 20:20 UTC (permalink / raw)
To: kuba, kvalo, linux-wireless, linux-kernel
From c03d73d37df440d0046d68406fde2aa1f62fe0d1 Mon Sep 17 00:00:00 2001
From: Herman Semenoff <GermanAizek@aizekgroup.ru>
Date: Thu, 3 Sep 2026 07:14:32 +0300
Subject: [PATCH wireless-next] wifi: mt7601u: add vnd_reset parameter
to fix probe failure on Tenda U2
On certain MT7601U adapters, such as Tenda U2 and other newer hardware
revisions, driver initialization consistently fails during probe with
vendor request timeouts (-110 / -ETIMEDOUT):
mt7601u 3-14:1.0: ASIC revision: 76010001 MAC revision: 76010500
mt7601u 3-14:1.0: Firmware Version: 0.1.00 Build: 7640
mt7601u 3-14:1.0: Vendor request req:07 off:09a8 failed:-110
mt7601u 3-14:1.0: Vendor request req:02 off:09a8 failed:-110
mt7601u 3-14:1.0: Vendor request req:07 off:0734 failed:-110
mt7601u 3-14:1.0: Vendor request req:42 off:0230 failed:-110
mt7601u 3-14:1.0: probe with driver mt7601u failed with error -110
The failure occurs because mt7601u_load_firmware() unconditionally calls
mt7601u_vendor_reset() (MT_VEND_DEV_MODE_RESET) before uploading firmware
chunks. On these devices, issuing this vendor reset leaves the internal
MCU / FCE DMA engine in an unresponsive state after the first firmware
URB is submitted. As a result, reading MT_TX_CPU_FROM_FCE_CPU_DESC_IDX
(0x09a8) immediately times out.
Introduce a boolean module parameter 'vnd_reset' (default: false) to
make this vendor reset optional. When the vendor reset is skipped,
firmware upload succeeds and the wireless interface initializes normally.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1716301
Link: https://www.opena.tv/viewtopic.php?t=63919
Link: https://askubuntu.com/questions/1418850/the-problem-with-wi-fi-u2
Link: https://bbs.archlinux.org/viewtopic.php?id=224859
Link: https://reddit.com/r/archlinux/comments/1d6dfv5/mt7601u_usb_wifi_not_working/
Signed-off-by: Herman Semenoff <GermanAizek@aizekgroup.ru>
---
This patch is based on linux-next (tag: next-20260904, commit af5f12805e5c)
and targets the wireless-next tree.
Note: Alternatively, if maintainers prefer to avoid adding a module
parameter and can confirm that mt7601u_vendor_reset() is not required
on any supported hardware, the vendor reset call could instead be dropped
entirely.
drivers/net/wireless/mediatek/mt7601u/mcu.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt7601u/mcu.c
b/drivers/net/wireless/mediatek/mt7601u/mcu.c
index bad6ca821400..c7c5bd9bb9df 100644
--- a/drivers/net/wireless/mediatek/mt7601u/mcu.c
+++ b/drivers/net/wireless/mediatek/mt7601u/mcu.c
@@ -10,6 +10,7 @@
#include <linux/delay.h>
#include <linux/usb.h>
#include <linux/skbuff.h>
+#include <linux/moduleparam.h>
#include "mt7601u.h"
#include "dma.h"
@@ -21,6 +22,10 @@
#define MCU_FW_URB_SIZE (MCU_FW_URB_MAX_PAYLOAD + 12)
#define MCU_RESP_URB_SIZE 1024
+static bool vnd_reset;
+module_param(vnd_reset, bool, 0644);
+MODULE_PARM_DESC(vnd_reset, "Perform vendor reset during firmware
upload (default: false)");
+
static inline int firmware_running(struct mt7601u_dev *dev)
{
return mt7601u_rr(dev, MT_MCU_COM_REG0) == 1;
@@ -459,8 +464,10 @@ static int mt7601u_load_firmware(struct mt7601u_dev *dev)
mt7601u_wr(dev, 0x94c, 0);
mt7601u_wr(dev, MT_FCE_PSE_CTRL, 0);
- mt7601u_vendor_reset(dev);
- msleep(5);
+ if (vnd_reset) {
+ mt7601u_vendor_reset(dev);
+ usleep_range(5000, 10000);
+ }
mt7601u_wr(dev, 0xa44, 0);
mt7601u_wr(dev, 0x230, 0x84210);
--
2.55.0
base-commit: af5f12805e5cefa4fe68d6127c7e1fb78cd5535c
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH wireless-next] wifi: mt7601u: add vnd_reset parameter to fix probe failure on Tenda U2
2026-09-06 20:20 [PATCH wireless-next] wifi: mt7601u: add vnd_reset parameter to fix probe failure on Tenda U2 Herman Semenoff
@ 2026-09-06 20:44 ` Bitterblue Smith
0 siblings, 0 replies; 3+ messages in thread
From: Bitterblue Smith @ 2026-09-06 20:44 UTC (permalink / raw)
To: Herman Semenoff, kuba, kvalo, linux-wireless, linux-kernel
On 06/09/2026 23:20, Herman Semenoff wrote:
> From c03d73d37df440d0046d68406fde2aa1f62fe0d1 Mon Sep 17 00:00:00 2001
> From: Herman Semenoff <GermanAizek@aizekgroup.ru>
> Date: Thu, 3 Sep 2026 07:14:32 +0300
> Subject: [PATCH wireless-next] wifi: mt7601u: add vnd_reset parameter
> to fix probe failure on Tenda U2
>
> On certain MT7601U adapters, such as Tenda U2 and other newer hardware
> revisions, driver initialization consistently fails during probe with
> vendor request timeouts (-110 / -ETIMEDOUT):
>
> mt7601u 3-14:1.0: ASIC revision: 76010001 MAC revision: 76010500
> mt7601u 3-14:1.0: Firmware Version: 0.1.00 Build: 7640
> mt7601u 3-14:1.0: Vendor request req:07 off:09a8 failed:-110
> mt7601u 3-14:1.0: Vendor request req:02 off:09a8 failed:-110
> mt7601u 3-14:1.0: Vendor request req:07 off:0734 failed:-110
> mt7601u 3-14:1.0: Vendor request req:42 off:0230 failed:-110
> mt7601u 3-14:1.0: probe with driver mt7601u failed with error -110
>
> The failure occurs because mt7601u_load_firmware() unconditionally calls
> mt7601u_vendor_reset() (MT_VEND_DEV_MODE_RESET) before uploading firmware
> chunks. On these devices, issuing this vendor reset leaves the internal
> MCU / FCE DMA engine in an unresponsive state after the first firmware
> URB is submitted. As a result, reading MT_TX_CPU_FROM_FCE_CPU_DESC_IDX
> (0x09a8) immediately times out.
>
> Introduce a boolean module parameter 'vnd_reset' (default: false) to
> make this vendor reset optional. When the vendor reset is skipped,
> firmware upload succeeds and the wireless interface initializes normally.
>
Hi,
I don't think a new module parameter will be accepted.
You could just delete the vendor reset. The devices which currently work
with the vendor reset will probably still work without it:
https://lore.kernel.org/linux-wireless/62826d1d-9cef-4eff-b6c5-5ed11405a482@gmail.com/
> Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1716301
> Link: https://www.opena.tv/viewtopic.php?t=63919
> Link: https://askubuntu.com/questions/1418850/the-problem-with-wi-fi-u2
> Link: https://bbs.archlinux.org/viewtopic.php?id=224859
> Link: https://reddit.com/r/archlinux/comments/1d6dfv5/mt7601u_usb_wifi_not_working/
> Signed-off-by: Herman Semenoff <GermanAizek@aizekgroup.ru>
> ---
> This patch is based on linux-next (tag: next-20260904, commit af5f12805e5c)
> and targets the wireless-next tree.
>
> Note: Alternatively, if maintainers prefer to avoid adding a module
> parameter and can confirm that mt7601u_vendor_reset() is not required
> on any supported hardware, the vendor reset call could instead be dropped
> entirely.
>
> drivers/net/wireless/mediatek/mt7601u/mcu.c | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt7601u/mcu.c
> b/drivers/net/wireless/mediatek/mt7601u/mcu.c
> index bad6ca821400..c7c5bd9bb9df 100644
> --- a/drivers/net/wireless/mediatek/mt7601u/mcu.c
> +++ b/drivers/net/wireless/mediatek/mt7601u/mcu.c
> @@ -10,6 +10,7 @@
> #include <linux/delay.h>
> #include <linux/usb.h>
> #include <linux/skbuff.h>
> +#include <linux/moduleparam.h>
>
> #include "mt7601u.h"
> #include "dma.h"
> @@ -21,6 +22,10 @@
> #define MCU_FW_URB_SIZE (MCU_FW_URB_MAX_PAYLOAD + 12)
> #define MCU_RESP_URB_SIZE 1024
>
> +static bool vnd_reset;
> +module_param(vnd_reset, bool, 0644);
> +MODULE_PARM_DESC(vnd_reset, "Perform vendor reset during firmware
> upload (default: false)");
> +
> static inline int firmware_running(struct mt7601u_dev *dev)
> {
> return mt7601u_rr(dev, MT_MCU_COM_REG0) == 1;
> @@ -459,8 +464,10 @@ static int mt7601u_load_firmware(struct mt7601u_dev *dev)
> mt7601u_wr(dev, 0x94c, 0);
> mt7601u_wr(dev, MT_FCE_PSE_CTRL, 0);
>
> - mt7601u_vendor_reset(dev);
> - msleep(5);
> + if (vnd_reset) {
> + mt7601u_vendor_reset(dev);
> + usleep_range(5000, 10000);
> + }
>
> mt7601u_wr(dev, 0xa44, 0);
> mt7601u_wr(dev, 0x230, 0x84210);
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH wireless-next] wifi: mt7601u: add vnd_reset parameter to fix probe failure on Tenda U2
@ 2026-09-06 20:17 Herman Semenoff
0 siblings, 0 replies; 3+ messages in thread
From: Herman Semenoff @ 2026-09-06 20:17 UTC (permalink / raw)
To: kuba, kvalo, linux-wireless, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1 bytes --]
[-- Attachment #2: 0001-PATCH-wifi-mt7601u-add-vnd_reset-parameter-to-fix-pr.patch --]
[-- Type: text/x-patch, Size: 3552 bytes --]
From c03d73d37df440d0046d68406fde2aa1f62fe0d1 Mon Sep 17 00:00:00 2001
From: Herman Semenoff <GermanAizek@aizekgroup.ru>
Date: Thu, 3 Sep 2026 07:14:32 +0300
Subject: [PATCH wireless-next] wifi: mt7601u: add vnd_reset parameter to fix probe failure on Tenda U2
On certain MT7601U adapters, such as Tenda U2 and other newer hardware
revisions, driver initialization consistently fails during probe with
vendor request timeouts (-110 / -ETIMEDOUT):
mt7601u 3-14:1.0: ASIC revision: 76010001 MAC revision: 76010500
mt7601u 3-14:1.0: Firmware Version: 0.1.00 Build: 7640
mt7601u 3-14:1.0: Vendor request req:07 off:09a8 failed:-110
mt7601u 3-14:1.0: Vendor request req:02 off:09a8 failed:-110
mt7601u 3-14:1.0: Vendor request req:07 off:0734 failed:-110
mt7601u 3-14:1.0: Vendor request req:42 off:0230 failed:-110
mt7601u 3-14:1.0: probe with driver mt7601u failed with error -110
The failure occurs because mt7601u_load_firmware() unconditionally calls
mt7601u_vendor_reset() (MT_VEND_DEV_MODE_RESET) before uploading firmware
chunks. On these devices, issuing this vendor reset leaves the internal
MCU / FCE DMA engine in an unresponsive state after the first firmware
URB is submitted. As a result, reading MT_TX_CPU_FROM_FCE_CPU_DESC_IDX
(0x09a8) immediately times out.
Introduce a boolean module parameter 'vnd_reset' (default: false) to
make this vendor reset optional. When the vendor reset is skipped,
firmware upload succeeds and the wireless interface initializes normally.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1716301
Link: https://www.opena.tv/viewtopic.php?t=63919
Link: https://askubuntu.com/questions/1418850/the-problem-with-wi-fi-u2
Link: https://bbs.archlinux.org/viewtopic.php?id=224859
Link: https://reddit.com/r/archlinux/comments/1d6dfv5/mt7601u_usb_wifi_not_working/
Signed-off-by: Herman Semenoff <GermanAizek@aizekgroup.ru>
---
This patch is based on linux-next (tag: next-20260904, commit af5f12805e5c)
and targets the wireless-next tree.
Note: Alternatively, if maintainers prefer to avoid adding a module
parameter and can confirm that mt7601u_vendor_reset() is not required
on any supported hardware, the vendor reset call could instead be dropped
entirely.
drivers/net/wireless/mediatek/mt7601u/mcu.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt7601u/mcu.c b/drivers/net/wireless/mediatek/mt7601u/mcu.c
index bad6ca821400..c7c5bd9bb9df 100644
--- a/drivers/net/wireless/mediatek/mt7601u/mcu.c
+++ b/drivers/net/wireless/mediatek/mt7601u/mcu.c
@@ -10,6 +10,7 @@
#include <linux/delay.h>
#include <linux/usb.h>
#include <linux/skbuff.h>
+#include <linux/moduleparam.h>
#include "mt7601u.h"
#include "dma.h"
@@ -21,6 +22,10 @@
#define MCU_FW_URB_SIZE (MCU_FW_URB_MAX_PAYLOAD + 12)
#define MCU_RESP_URB_SIZE 1024
+static bool vnd_reset;
+module_param(vnd_reset, bool, 0644);
+MODULE_PARM_DESC(vnd_reset, "Perform vendor reset during firmware upload (default: false)");
+
static inline int firmware_running(struct mt7601u_dev *dev)
{
return mt7601u_rr(dev, MT_MCU_COM_REG0) == 1;
@@ -459,8 +464,10 @@ static int mt7601u_load_firmware(struct mt7601u_dev *dev)
mt7601u_wr(dev, 0x94c, 0);
mt7601u_wr(dev, MT_FCE_PSE_CTRL, 0);
- mt7601u_vendor_reset(dev);
- msleep(5);
+ if (vnd_reset) {
+ mt7601u_vendor_reset(dev);
+ usleep_range(5000, 10000);
+ }
mt7601u_wr(dev, 0xa44, 0);
mt7601u_wr(dev, 0x230, 0x84210);
--
2.55.0
base-commit: af5f12805e5cefa4fe68d6127c7e1fb78cd5535c
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-09-06 20:44 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-09-06 20:20 [PATCH wireless-next] wifi: mt7601u: add vnd_reset parameter to fix probe failure on Tenda U2 Herman Semenoff
2026-09-06 20:44 ` Bitterblue Smith
-- strict thread matches above, loose matches on Subject: below --
2026-09-06 20:17 Herman Semenoff
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®