Re: [PATCH 2/2] PCI: brcmstb: Add panic/die handler to driver

[Florian Fainelli <florian.fainelli@broadcom.com>]

On 6/13/25 15:08, Jim Quinlan wrote:
> Whereas most PCIe HW returns 0xffffffff on illegal accesses and the like,
> by default Broadcom's STB PCIe controller effects an abort.  Some SoCs --
> 7216 and its descendants -- have new HW that identifies error details.
> 
> This simple handler determines if the PCIe controller was the cause of the
> abort and if so, prints out diagnostic info.  Unfortunately, an abort still
> occurs.
> 
> Care is taken to read the error registers only when the PCIe bridge is
> active and the PCIe registers are acceptable.  Otherwise, a "die" event
> caused by something other than the PCIe could cause an abort if the PCIe
> "die" handler tried to access registers when the bridge is off.
> 
> Example error output:
>    brcm-pcie 8b20000.pcie: Error: Mem Acc: 32bit, Read, @0x38000000
>    brcm-pcie 8b20000.pcie:  Type: TO=0 Abt=0 UnspReq=1 AccDsble=0 BadAddr=0
> 
> Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian