[PATCH v2 0/3] arm64: dts: qcom: msm8996: enable fastrpc and glink-edge

[PATCH v2 0/3] arm64: dts: qcom: msm8996: enable fastrpc and glink-edge

[Dmitry Baryshkov]

Enable the FastRPC and glink-edge nodes on MSM8996 platform. Tested on
APQ8096 Dragonboard820c.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Changes in v2:
- Fixed order of compute nodes (Konrad)
- Link to v1: https://lore.kernel.org/r/20240401-msm8996-remoteproc-v1-0-f02ab47fc728@linaro.org

---
Dmitry Baryshkov (2):
      dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
      arm64: dts: qcom: msm8996: add glink-edge nodes

Srinivas Kandagatla (1):
      arm64: dts: msm8996: add fastrpc nodes

 .../bindings/remoteproc/qcom,msm8996-mss-pil.yaml  |  1 -
 arch/arm64/boot/dts/qcom/msm8996.dtsi              | 79 ++++++++++++++++++++++
 2 files changed, 79 insertions(+), 1 deletion(-)
---
base-commit: 4eab358930711bbeb85bf5ee267d0d42d3394c2c
change-id: 20240320-msm8996-remoteproc-fccbc2b54ea1

Best regards,
-- 
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[PATCH v2 1/3] dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996

[Dmitry Baryshkov]

MSM8996 has limited glink support, allow glink-edge node on MSM8996
platform.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
index 971734085d51..4d2055f283ac 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
@@ -231,7 +231,6 @@ allOf:
             - const: snoc_axi
             - const: mnoc_axi
             - const: qdss
-        glink-edge: false
       required:
         - pll-supply
         - smd-edge

-- 
2.39.2

[PATCH v2 2/3] arm64: dts: qcom: msm8996: add glink-edge nodes

[Dmitry Baryshkov]

MSM8996 provides limited glink support, so add corresponding device tree
nodes. For example the following interfaces are provided on db820c:

modem:
2080000.remoteproc:glink-edge.LOOPBACK_CTL_MPSS.-1.-1
2080000.remoteproc:glink-edge.glink_ssr.-1.-1
2080000.remoteproc:glink-edge.rpmsg_chrdev.0.0

adsp:
9300000.remoteproc:glink-edge.LOOPBACK_CTL_LPASS.-1.-1
9300000.remoteproc:glink-edge.glink_ssr.-1.-1
9300000.remoteproc:glink-edge.rpmsg_chrdev.0.0

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 1601e46549e7..7ae499fa7d91 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2453,6 +2453,13 @@ slpi_pil: remoteproc@1c00000 {
 
 			status = "disabled";
 
+			glink-edge {
+				interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apcs_glb 27>;
+			};
+
 			smd-edge {
 				interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
 
@@ -2522,6 +2529,13 @@ metadata {
 				memory-region = <&mdata_mem>;
 			};
 
+			glink-edge {
+				interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 15>;
+			};
+
 			smd-edge {
 				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
 
@@ -3467,6 +3481,14 @@ adsp_pil: remoteproc@9300000 {
 
 			status = "disabled";
 
+			glink-edge {
+				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 9>;
+			};
+
+
 			smd-edge {
 				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
 

-- 
2.39.2

[PATCH v2 3/3] arm64: dts: msm8996: add fastrpc nodes

[Dmitry Baryshkov]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

The ADSP provides fastrpc/compute capabilities. Enable support for the
fastrpc on this DSP.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 57 +++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 7ae499fa7d91..f9bbb191661b 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -3545,6 +3545,63 @@ q6routing: routing {
 						};
 					};
 				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,smd-channels = "fastrpcsmd-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&lpass_q6_smmu 5>;
+					};
+
+					cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&lpass_q6_smmu 6>;
+					};
+
+					cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&lpass_q6_smmu 7>;
+					};
+
+					cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&lpass_q6_smmu 8>;
+					};
+
+					cb@9 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <9>;
+						iommus = <&lpass_q6_smmu 9>;
+					};
+
+					cb@10 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <10>;
+						iommus = <&lpass_q6_smmu 10>;
+					};
+
+					cb@11 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <11>;
+						iommus = <&lpass_q6_smmu 11>;
+					};
+
+					cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&lpass_q6_smmu 12>;
+					};
+				};
 			};
 		};
 

-- 
2.39.2

Re: [PATCH v2 3/3] arm64: dts: msm8996: add fastrpc nodes

[Konrad Dybcio]

On 18.04.2024 8:44 AM, Dmitry Baryshkov wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> 
> The ADSP provides fastrpc/compute capabilities. Enable support for the
> fastrpc on this DSP.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

Re: (subset) [PATCH v2 0/3] arm64: dts: qcom: msm8996: enable fastrpc and glink-edge

[Bjorn Andersson]

On Thu, 18 Apr 2024 09:44:19 +0300, Dmitry Baryshkov wrote:
> Enable the FastRPC and glink-edge nodes on MSM8996 platform. Tested on
> APQ8096 Dragonboard820c.
> 
> 

Applied, thanks!

[1/3] dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
      commit: a0acdef561d1699b020ab932a0edb556c4829533

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Re: (subset) [PATCH v2 0/3] arm64: dts: qcom: msm8996: enable fastrpc and glink-edge

[Bjorn Andersson]

On Thu, 18 Apr 2024 09:44:19 +0300, Dmitry Baryshkov wrote:
> Enable the FastRPC and glink-edge nodes on MSM8996 platform. Tested on
> APQ8096 Dragonboard820c.
> 
> 

Applied, thanks!

[2/3] arm64: dts: qcom: msm8996: add glink-edge nodes
      commit: 56ae780a4387d71dd709895acd95112d01f37fb4
[3/3] arm64: dts: msm8996: add fastrpc nodes
      commit: 1b80b83f893dd69efe3c3bf84cd9f661218ccfc0

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>