[PATCH 1/2] arm64: dts: qcom: sm8450-hdk: use precise WCD9385 compatible

[PATCH 1/2] arm64: dts: qcom: sm8450-hdk: use precise WCD9385 compatible

[Krzysztof Kozlowski]

The HDK8450 uses WCD9385 audio codec, so use precise compatible, even
though WCD9380 and WCD9385 are both compatible.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index e04de4bb7fae..9cd1d1bd86cb 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -25,7 +25,7 @@ aliases {
 	};
 
 	wcd938x: audio-codec {
-		compatible = "qcom,wcd9380-codec";
+		compatible = "qcom,wcd9385-codec";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&wcd_default>;
-- 
2.34.1

[PATCH 2/2] arm64: dts: qcom: sm8450-hdk: align WCD9385 reset pin with downstream config

[Krzysztof Kozlowski]

Downstream DTS uses 16 mA drive strength for the WCD9385 audio codec
RESET_N reset pin.  It also pulls the pin down in shutdown mode, thus it
is more like a shutdown pin, not a reset.  Use the same settings here
for HDK8450 and keep the WCD9385 by default in powered off (so pin as
low).  Align the name of pin configuration node with other pins in the
DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index 9cd1d1bd86cb..4020e54e16f5 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -767,9 +767,11 @@ spkr_2_sd_n_active: spkr-2-sd-n-active-state {
 		output-low;
 	};
 
-	wcd_default: wcd-default-state {
+	wcd_default: wcd-reset-n-active-state {
 		pins = "gpio43";
 		function = "gpio";
+		drive-strength = <16>;
 		bias-disable;
+		output-low;
 	};
 };
-- 
2.34.1

Re: [PATCH 2/2] arm64: dts: qcom: sm8450-hdk: align WCD9385 reset pin with downstream config

[Konrad Dybcio]

On 8.03.2023 19:33, Krzysztof Kozlowski wrote:
> Downstream DTS uses 16 mA drive strength for the WCD9385 audio codec
> RESET_N reset pin.  It also pulls the pin down in shutdown mode, thus it
> is more like a shutdown pin, not a reset.  Use the same settings here
> for HDK8450 and keep the WCD9385 by default in powered off (so pin as
> low).  Align the name of pin configuration node with other pins in the
> DTS.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> index 9cd1d1bd86cb..4020e54e16f5 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> @@ -767,9 +767,11 @@ spkr_2_sd_n_active: spkr-2-sd-n-active-state {
>  		output-low;
>  	};
>  
> -	wcd_default: wcd-default-state {
> +	wcd_default: wcd-reset-n-active-state {
>  		pins = "gpio43";
>  		function = "gpio";
> +		drive-strength = <16>;
>  		bias-disable;
> +		output-low;
>  	};
>  };

Re: [PATCH 1/2] arm64: dts: qcom: sm8450-hdk: use precise WCD9385 compatible

[Konrad Dybcio]

On 8.03.2023 19:33, Krzysztof Kozlowski wrote:
> The HDK8450 uses WCD9385 audio codec, so use precise compatible, even
> though WCD9380 and WCD9385 are both compatible.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> index e04de4bb7fae..9cd1d1bd86cb 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> @@ -25,7 +25,7 @@ aliases {
>  	};
>  
>  	wcd938x: audio-codec {
> -		compatible = "qcom,wcd9380-codec";
> +		compatible = "qcom,wcd9385-codec";
>  
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&wcd_default>;

Re: (subset) [PATCH 1/2] arm64: dts: qcom: sm8450-hdk: use precise WCD9385 compatible

[Bjorn Andersson]

On Wed, 8 Mar 2023 19:33:16 +0100, Krzysztof Kozlowski wrote:
> The HDK8450 uses WCD9385 audio codec, so use precise compatible, even
> though WCD9380 and WCD9385 are both compatible.
> 
> 

Applied, thanks!

[1/2] arm64: dts: qcom: sm8450-hdk: use precise WCD9385 compatible
      commit: f0d0966f87f9c38b74619bf7f0345f368af3a4c1
[2/2] arm64: dts: qcom: sm8450-hdk: align WCD9385 reset pin with downstream config
      commit: 6b2777fff8a9942cdcee82ae3f17d7f483a1e18c

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>