From: "David E. Box" <david.e.box@linux.intel.com>
To: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
platform-driver-x86@vger.kernel.org,
rajvi.jingar@linux.intel.com
Subject: Re: [PATCH V3 03/16] platform/x86/intel/vsec: Use cleanup.h
Date: Fri, 13 Oct 2023 15:16:08 -0700 [thread overview]
Message-ID: <ec4ba6b6d05c2b6ca34009f40e84f65801a8104b.camel@linux.intel.com> (raw)
In-Reply-To: <4315a8db-16fe-7421-c482-5aede4d5cdd@linux.intel.com>
On Fri, 2023-10-13 at 13:54 +0300, Ilpo Järvinen wrote:
> On Thu, 12 Oct 2023, David E. Box wrote:
>
> > On Thu, 2023-10-12 at 17:46 +0300, Ilpo Järvinen wrote:
> > > On Wed, 11 Oct 2023, David E. Box wrote:
> > >
> > > > Use cleanup.h helpers to handle cleanup of resources in
> > > > intel_vsec_add_dev() after failures.
> > > >
> > > > Signed-off-by: David E. Box <david.e.box@linux.intel.com>
> > > > ---
> > > > V3 - New patch.
> > > >
> > > > drivers/platform/x86/intel/vsec.c | 17 ++++++++++-------
> > > > 1 file changed, 10 insertions(+), 7 deletions(-)
> > > >
> > > > diff --git a/drivers/platform/x86/intel/vsec.c
> > > > b/drivers/platform/x86/intel/vsec.c
> > > > index 15866b7d3117..f03ab89ab7c0 100644
> > > > --- a/drivers/platform/x86/intel/vsec.c
> > > > +++ b/drivers/platform/x86/intel/vsec.c
> > > > @@ -15,6 +15,7 @@
> > > >
> > > > #include <linux/auxiliary_bus.h>
> > > > #include <linux/bits.h>
> > > > +#include <linux/cleanup.h>
> > > > #include <linux/delay.h>
> > > > #include <linux/kernel.h>
> > > > #include <linux/idr.h>
> > > > @@ -155,10 +156,10 @@ EXPORT_SYMBOL_NS_GPL(intel_vsec_add_aux,
> > > > INTEL_VSEC);
> > > > static int intel_vsec_add_dev(struct pci_dev *pdev, struct
> > > > intel_vsec_header *header,
> > > > struct intel_vsec_platform_info *info)
> > > > {
> > > > - struct intel_vsec_device *intel_vsec_dev;
> > > > + struct intel_vsec_device __free(kfree) *intel_vsec_dev = NULL;
> > > > struct resource *res, *tmp;
> > > > unsigned long quirks = info->quirks;
> > > > - int i;
> > > > + int ret, i;
> > > >
> > > > if (!intel_vsec_supported(header->id, info->caps))
> > > > return -EINVAL;
> > > > @@ -178,10 +179,8 @@ static int intel_vsec_add_dev(struct pci_dev *pdev,
> > > > struct intel_vsec_header *he
> > > > return -ENOMEM;
> > > >
> > > > res = kcalloc(header->num_entries, sizeof(*res), GFP_KERNEL);
> > > > - if (!res) {
> > > > - kfree(intel_vsec_dev);
> > > > + if (!res)
> > > > return -ENOMEM;
> > > > - }
> > > >
> > > > if (quirks & VSEC_QUIRK_TABLE_SHIFT)
> > > > header->offset >>= TABLE_OFFSET_SHIFT;
> > > > @@ -208,8 +207,12 @@ static int intel_vsec_add_dev(struct pci_dev *pdev,
> > > > struct intel_vsec_header *he
> > > > else
> > > > intel_vsec_dev->ida = &intel_vsec_ida;
> > > >
> > > > - return intel_vsec_add_aux(pdev, NULL, intel_vsec_dev,
> > > > - intel_vsec_name(header->id));
> > > > + ret = intel_vsec_add_aux(pdev, NULL, intel_vsec_dev,
> > > > + intel_vsec_name(header->id));
> > > > +
> > > > + no_free_ptr(intel_vsec_dev);
> > > > +
> > > > + return ret;
> > >
> > > So if intel_vsec_add_aux() returned an error, intel_vsec_dev won't be
> > > freed because of the call call to no_free_ptr() before return. I that's
> > > not what you intended?
> >
> > It will have been freed if intel_vsec_add_aux() fails. It's a little messy.
> > That
> > function creates the auxdev and assigns the release function which will free
> > intel_vsec_dev when the device is removed. But there are failure points that
> > will also invoke the release function. Because of this, for all the failure
> > points in that function we free intel_vsec_dev so that it's state doesn't
> > need
> > to be questioned here. This happens explicitly if the failure is before
> > auxiliary_device_init(), or through the release function invoked by
> > auxiliary_device_uninit() if after.
>
> Oh, that's really convoluted and no wonder I missed it completely. It
> might even be that using cleanup.h here isn't really worth it. I know
> I pushed you into that direction but I didn't realize all the complexity
> at that point.
>
> If you still want to keep using cleanup.h, it would perhaps be less
> dangerous if you change the code such that no_free_ptr() for
> intel_vsec_dev and the resource (in 4/16, that's a similar case, isn't
> it?)
yes
> are before the intel_vsec_add_aux() call (and I'd also add a comment
> to explain that freeing them is now responsability of
> intel_vsec_add_aux()). That way, we don't leave a trap into there where
> somebody happily adds another no_free_ptr() to the same group and it
> causes a mem leak.
Sure. After the comment I'd just do this then still the value is still needed,
ret = intel_vsec_add_aux(pdev, NULL, no_free_ptr(intel_vsec_dev),
intel_vsec_name(header->id));
David
next prev parent reply other threads:[~2023-10-13 22:16 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-12 2:38 [PATCH V3 00/16] intel_pmc: Add telemetry API to read counters David E. Box
2023-10-12 2:38 ` [PATCH V3 01/16] platform/x86/intel/vsec: Move structures to header David E. Box
2023-10-12 2:38 ` [PATCH V3 02/16] platform/x86/intel/vsec: remove platform_info from vsec device structure David E. Box
2023-10-12 15:31 ` Ilpo Järvinen
2023-10-12 16:55 ` David E. Box
2023-10-12 2:38 ` [PATCH V3 03/16] platform/x86/intel/vsec: Use cleanup.h David E. Box
2023-10-12 5:25 ` kernel test robot
2023-10-12 17:23 ` David E. Box
2023-10-13 10:39 ` Ilpo Järvinen
2023-10-13 18:14 ` Joe Perches
2023-10-24 5:15 ` Joe Perches
2023-10-12 5:48 ` kernel test robot
2023-10-12 14:46 ` Ilpo Järvinen
2023-10-12 17:13 ` David E. Box
2023-10-13 10:54 ` Ilpo Järvinen
2023-10-13 22:16 ` David E. Box [this message]
2023-10-16 12:02 ` Ilpo Järvinen
2023-10-12 2:38 ` [PATCH V3 04/16] platform/x86/intel/vsec: Add intel_vsec_register David E. Box
2023-10-12 2:38 ` [PATCH V3 05/16] platform/x86/intel/vsec: Add base address field David E. Box
2023-10-12 2:38 ` [PATCH V3 06/16] platform/x86/intel/pmt: Add header to struct intel_pmt_entry David E. Box
2023-10-12 2:38 ` [PATCH V3 07/16] platform/x86/intel/pmt: telemetry: Export API to read telemetry David E. Box
2023-10-12 2:38 ` [PATCH V3 08/16] platform/x86:intel/pmc: Call pmc_get_low_power_modes from platform init David E. Box
2023-10-12 2:38 ` [PATCH V3 09/16] platform/x86/intel/pmc: Allow pmc_core_ssram_init to fail David E. Box
2023-10-12 15:01 ` Ilpo Järvinen
2023-10-12 17:52 ` David E. Box
2023-10-13 11:36 ` Ilpo Järvinen
2023-10-12 2:38 ` [PATCH V3 10/16] platform/x86/intel/pmc: Split pmc_core_ssram_get_pmc() David E. Box
2023-10-12 15:14 ` Ilpo Järvinen
2023-10-12 17:28 ` David E. Box
2023-10-12 2:38 ` [PATCH V3 11/16] platform/x86/intel/pmc: Find and register PMC telemetry entries David E. Box
2023-10-12 15:17 ` Ilpo Järvinen
2023-10-12 2:38 ` [PATCH V3 12/16] platform/x86/intel/pmc: Display LPM requirements for multiple PMCs David E. Box
2023-10-12 2:38 ` [PATCH V3 13/16] platform/x86/intel/pmc: Retrieve LPM information using Intel PMT David E. Box
2023-10-12 2:38 ` [PATCH V3 14/16] platform/x86/intel/pmc: Read low power mode requirements for MTL-M and MTL-P David E. Box
2023-10-12 2:38 ` [PATCH V3 15/16] platform/x86/intel/pmc: Add debug attribute for Die C6 counter David E. Box
2023-10-12 2:38 ` [PATCH V3 16/16] platform/x86/intel/pmc: Show Die C6 counter on Meteor Lake David E. Box
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ec4ba6b6d05c2b6ca34009f40e84f65801a8104b.camel@linux.intel.com \
--to=david.e.box@linux.intel.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rajvi.jingar@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome