[PATCH v2] ARM: bcm2835_defconfig: add support for Raspberry Pi4

[PATCH v2] ARM: bcm2835_defconfig: add support for Raspberry Pi4

[Marek Szyprowski]

Add drivers needed to boot Raspberry Pi4 board.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
v2:
- added BCM2711_THERMAL
---
 arch/arm/configs/bcm2835_defconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 519ff58e67b3..38437541ea76 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -72,6 +72,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_NETDEVICES=y
+CONFIG_BCMGENET=y
 CONFIG_USB_LAN78XX=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
@@ -96,9 +97,13 @@ CONFIG_SPI_BCM2835AUX=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_THERMAL=y
+CONFIG_BCM2711_THERMAL=y
 CONFIG_BCM2835_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
+CONFIG_MFD_SYSCON=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_DRM=y
-- 
2.17.1

Re: [PATCH v2] ARM: bcm2835_defconfig: add support for Raspberry Pi4

[Nicolas Saenz Julienne]

[-- Attachment #1: Type: text/plain, Size: 224 bytes --]

On Mon, 2020-02-17 at 16:55 +0100, Marek Szyprowski wrote:
> Add drivers needed to boot Raspberry Pi4 board.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---

Patch applied.

Thanks!
Nicolas


[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 488 bytes --]