Re: [PATCH v11 1/3] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs

[Akhil P Oommen <akhilpo@oss.qualcomm.com>]

On 11/1/2025 11:14 PM, Krishna Kurapati wrote:
> From: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
> 
> SM8750 chipset contains a single DWC3 USB3 controller (rev. 200a), SS
> QMP PHY (rev. v8) and M31 eUSB2 PHY.  The major difference for SM8750 is
> the transition to using the M31 eUSB2 PHY compared to previous SoCs.
> 
> Enable USB support on SM8750 MTP and QRD variants. SM8750 has a QMP combo
> PHY for the SSUSB path, and a M31 eUSB2 PHY for the HSUSB path.
> 
> Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
> [Konrad: Provided diff to flattened USB node]
> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/sm8750.dtsi | 161 ++++++++++++++++++++++++++-
>  1 file changed, 160 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
> index a82d9867c7cb..3f0b57f428bb 100644
> --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
> @@ -12,6 +12,7 @@
>  #include <dt-bindings/interconnect/qcom,sm8750-rpmh.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/mailbox/qcom-ipcc.h>
> +#include <dt-bindings/phy/phy-qcom-qmp.h>
>  #include <dt-bindings/power/qcom,rpmhpd.h>
>  #include <dt-bindings/power/qcom-rpmpd.h>
>  #include <dt-bindings/soc/qcom,gpr.h>
> @@ -635,7 +636,7 @@ gcc: clock-controller@100000 {
>  				 <0>,
>  				 <0>,
>  				 <0>,
> -				 <0>;
> +				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
>  
>  			#clock-cells = <1>;
>  			#reset-cells = <1>;
> @@ -2581,6 +2582,164 @@ data-pins {
>  			};
>  		};
>  
> +		usb_hsphy: phy@88e3000 {
> +			compatible = "qcom,sm8750-m31-eusb2-phy";
> +			reg = <0x0 0x88e3000 0x0 0x29c>;
> +
> +			clocks = <&tcsrcc TCSR_USB2_CLKREF_EN>;
> +			clock-names = "ref";
> +
> +			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> +
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		usb_dp_qmpphy: phy@88e8000 {
> +			compatible = "qcom,sm8750-qmp-usb3-dp-phy";
> +			reg = <0x0 0x088e8000 0x0 0x4000>;
> +
> +			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
> +				 <&tcsrcc TCSR_USB3_CLKREF_EN>,
> +				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> +				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +			clock-names = "aux",
> +				      "ref",
> +				      "com_aux",
> +				      "usb3_pipe";
> +
> +			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
> +				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
> +			reset-names = "phy",
> +				      "common";
> +
> +			power-domains = <&gcc GCC_USB3_PHY_GDSC>;
> +
> +			#clock-cells = <1>;
> +			#phy-cells = <1>;
> +
> +			orientation-switch;
> +
> +			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +
> +					usb_dp_qmpphy_out: endpoint {
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +
> +					usb_dp_qmpphy_usb_ss_in: endpoint {
> +						remote-endpoint = <&usb_dwc3_ss>;
> +					};
> +				};
> +
> +				port@2 {
> +					reg = <2>;
> +
> +					usb_dp_qmpphy_dp_in: endpoint {
> +					};
> +				};
> +			};
> +		};
> +
> +		usb: usb@a600000 {
> +			compatible = "qcom,sm8750-dwc3", "qcom,snps-dwc3";
> +			reg = <0x0 0x0a600000 0x0 0xfc100>;
> +
> +			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
> +				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
> +				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
> +				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
> +				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
> +			clock-names = "cfg_noc",
> +				      "core",
> +				      "iface",
> +				      "sleep",
> +				      "mock_utmi";
> +
> +			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> +					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
> +			assigned-clock-rates = <19200000>,
> +					       <200000000>;
> +
> +			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
> +					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> +					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> +					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
> +					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
> +					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "dwc_usb3",
> +					  "pwr_event",
> +					  "hs_phy_irq",
> +					  "dp_hs_phy_irq",
> +					  "dm_hs_phy_irq",
> +					  "ss_phy_irq";
> +
> +			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
> +			required-opps = <&rpmhpd_opp_nom>;

Probably I am missing something, but which power domain associated to a
rail is scaled to NOM corner here?

-Akhil