[PATCH v2] drm/amd/display: fix PSR-SU/DSC interoperability support

[PATCH v2] drm/amd/display: fix PSR-SU/DSC interoperability support

[Hamza Mahfooz]

Currently, there are issues with enabling PSR-SU + DSC. This stems from
the fact that DSC imposes a slice height on transmitted video data and
we are not conforming to that slice height in PSR-SU regions. So, pass
slice_height into su_y_granularity to feed the DSC slice height into
PSR-SU code.

Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
---
v2: move code to modules/power.
---
 .../drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c |  3 ++
 .../amd/display/modules/power/power_helpers.c | 35 +++++++++++++++++++
 .../amd/display/modules/power/power_helpers.h |  3 ++
 3 files changed, 41 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
index 26291db0a3cf..872d06fe1436 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
@@ -122,6 +122,9 @@ bool amdgpu_dm_link_setup_psr(struct dc_stream_state *stream)
 		psr_config.allow_multi_disp_optimizations =
 			(amdgpu_dc_feature_mask & DC_PSR_ALLOW_MULTI_DISP_OPT);
 
+		if (!psr_su_set_y_granularity(dc, link, stream, &psr_config))
+			return false;
+
 		ret = dc_link_setup_psr(link, stream, &psr_config, &psr_context);
 
 	}
diff --git a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
index 9b5d9b2c9a6a..4d27ad9f7370 100644
--- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
+++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
@@ -916,3 +916,38 @@ bool mod_power_only_edp(const struct dc_state *context, const struct dc_stream_s
 {
 	return context && context->stream_count == 1 && dc_is_embedded_signal(stream->signal);
 }
+
+bool psr_su_set_y_granularity(struct dc *dc, struct dc_link *link,
+			      struct dc_stream_state *stream,
+			      struct psr_config *config)
+{
+	uint16_t pic_height;
+	uint8_t slice_height;
+
+	if (!dc->caps.edp_dsc_support ||
+	    link->panel_config.dsc.disable_dsc_edp ||
+	    !link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_SUPPORT ||
+	    !stream->timing.dsc_cfg.num_slices_v)
+		return true;
+
+	pic_height = stream->timing.v_addressable +
+		stream->timing.v_border_top + stream->timing.v_border_bottom;
+	slice_height = pic_height / stream->timing.dsc_cfg.num_slices_v;
+
+	if (slice_height) {
+		if (config->su_y_granularity &&
+		    (slice_height % config->su_y_granularity)) {
+			WARN(1,
+			     "%s: dsc: %d, slice_height: %d, num_slices_v: %d\n",
+			     __func__,
+			     stream->sink->dsc_caps.dsc_dec_caps.is_dsc_supported,
+			     slice_height,
+			     stream->timing.dsc_cfg.num_slices_v);
+			return false;
+		}
+
+		config->su_y_granularity = slice_height;
+	}
+
+	return true;
+}
diff --git a/drivers/gpu/drm/amd/display/modules/power/power_helpers.h b/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
index 316452e9dbc9..bb16b37b83da 100644
--- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
+++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
@@ -59,4 +59,7 @@ void mod_power_calc_psr_configs(struct psr_config *psr_config,
 		const struct dc_stream_state *stream);
 bool mod_power_only_edp(const struct dc_state *context,
 		const struct dc_stream_state *stream);
+bool psr_su_set_y_granularity(struct dc *dc, struct dc_link *link,
+			      struct dc_stream_state *stream,
+			      struct psr_config *config);
 #endif /* MODULES_POWER_POWER_HELPERS_H_ */
-- 
2.38.1

Re: [PATCH v2] drm/amd/display: fix PSR-SU/DSC interoperability support

[Harry Wentland]

On 1/5/23 12:38, Hamza Mahfooz wrote:
> Currently, there are issues with enabling PSR-SU + DSC. This stems from
> the fact that DSC imposes a slice height on transmitted video data and
> we are not conforming to that slice height in PSR-SU regions. So, pass
> slice_height into su_y_granularity to feed the DSC slice height into
> PSR-SU code.
> 
> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
> ---
> v2: move code to modules/power.
> ---
>  .../drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c |  3 ++
>  .../amd/display/modules/power/power_helpers.c | 35 +++++++++++++++++++
>  .../amd/display/modules/power/power_helpers.h |  3 ++
>  3 files changed, 41 insertions(+)
> 
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
> index 26291db0a3cf..872d06fe1436 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
> @@ -122,6 +122,9 @@ bool amdgpu_dm_link_setup_psr(struct dc_stream_state *stream)
>  		psr_config.allow_multi_disp_optimizations =
>  			(amdgpu_dc_feature_mask & DC_PSR_ALLOW_MULTI_DISP_OPT);
>  
> +		if (!psr_su_set_y_granularity(dc, link, stream, &psr_config))
> +			return false;
> +
>  		ret = dc_link_setup_psr(link, stream, &psr_config, &psr_context);
>  
>  	}
> diff --git a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
> index 9b5d9b2c9a6a..4d27ad9f7370 100644
> --- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
> +++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
> @@ -916,3 +916,38 @@ bool mod_power_only_edp(const struct dc_state *context, const struct dc_stream_s
>  {
>  	return context && context->stream_count == 1 && dc_is_embedded_signal(stream->signal);
>  }
> +
> +bool psr_su_set_y_granularity(struct dc *dc, struct dc_link *link,
> +			      struct dc_stream_state *stream,
> +			      struct psr_config *config)
> +{
> +	uint16_t pic_height;
> +	uint8_t slice_height;
> +
> +	if (!dc->caps.edp_dsc_support ||
> +	    link->panel_config.dsc.disable_dsc_edp ||
> +	    !link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_SUPPORT ||
> +	    !stream->timing.dsc_cfg.num_slices_v)

I'm not sure this condition is correct. We can have DSC but not eDP DSC
support.

> +		return true;
> +
> +	pic_height = stream->timing.v_addressable +
> +		stream->timing.v_border_top + stream->timing.v_border_bottom;
> +	slice_height = pic_height / stream->timing.dsc_cfg.num_slices_v;
> +
> +	if (slice_height) {
> +		if (config->su_y_granularity &&
> +		    (slice_height % config->su_y_granularity)) {
> +			WARN(1,

We don't use WARN in display/dc or display/modules. DC_LOG_WARNING
might be better, or log it in the caller.

Harry

> +			     "%s: dsc: %d, slice_height: %d, num_slices_v: %d\n",
> +			     __func__,
> +			     stream->sink->dsc_caps.dsc_dec_caps.is_dsc_supported,
> +			     slice_height,
> +			     stream->timing.dsc_cfg.num_slices_v);
> +			return false;
> +		}
> +
> +		config->su_y_granularity = slice_height;
> +	}
> +
> +	return true;
> +}
> diff --git a/drivers/gpu/drm/amd/display/modules/power/power_helpers.h b/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
> index 316452e9dbc9..bb16b37b83da 100644
> --- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
> +++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
> @@ -59,4 +59,7 @@ void mod_power_calc_psr_configs(struct psr_config *psr_config,
>  		const struct dc_stream_state *stream);
>  bool mod_power_only_edp(const struct dc_state *context,
>  		const struct dc_stream_state *stream);
> +bool psr_su_set_y_granularity(struct dc *dc, struct dc_link *link,
> +			      struct dc_stream_state *stream,
> +			      struct psr_config *config);
>  #endif /* MODULES_POWER_POWER_HELPERS_H_ */

Re: [PATCH v2] drm/amd/display: fix PSR-SU/DSC interoperability support

[Hamza Mahfooz]

On 1/5/23 13:29, Harry Wentland wrote:
> 
> 
> On 1/5/23 12:38, Hamza Mahfooz wrote:
>> Currently, there are issues with enabling PSR-SU + DSC. This stems from
>> the fact that DSC imposes a slice height on transmitted video data and
>> we are not conforming to that slice height in PSR-SU regions. So, pass
>> slice_height into su_y_granularity to feed the DSC slice height into
>> PSR-SU code.
>>
>> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
>> ---
>> v2: move code to modules/power.
>> ---
>>   .../drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c |  3 ++
>>   .../amd/display/modules/power/power_helpers.c | 35 +++++++++++++++++++
>>   .../amd/display/modules/power/power_helpers.h |  3 ++
>>   3 files changed, 41 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
>> index 26291db0a3cf..872d06fe1436 100644
>> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
>> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
>> @@ -122,6 +122,9 @@ bool amdgpu_dm_link_setup_psr(struct dc_stream_state *stream)
>>   		psr_config.allow_multi_disp_optimizations =
>>   			(amdgpu_dc_feature_mask & DC_PSR_ALLOW_MULTI_DISP_OPT);
>>   
>> +		if (!psr_su_set_y_granularity(dc, link, stream, &psr_config))
>> +			return false;
>> +
>>   		ret = dc_link_setup_psr(link, stream, &psr_config, &psr_context);
>>   
>>   	}
>> diff --git a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
>> index 9b5d9b2c9a6a..4d27ad9f7370 100644
>> --- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
>> +++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
>> @@ -916,3 +916,38 @@ bool mod_power_only_edp(const struct dc_state *context, const struct dc_stream_s
>>   {
>>   	return context && context->stream_count == 1 && dc_is_embedded_signal(stream->signal);
>>   }
>> +
>> +bool psr_su_set_y_granularity(struct dc *dc, struct dc_link *link,
>> +			      struct dc_stream_state *stream,
>> +			      struct psr_config *config)
>> +{
>> +	uint16_t pic_height;
>> +	uint8_t slice_height;
>> +
>> +	if (!dc->caps.edp_dsc_support ||
>> +	    link->panel_config.dsc.disable_dsc_edp ||
>> +	    !link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_SUPPORT ||
>> +	    !stream->timing.dsc_cfg.num_slices_v)
> 
> I'm not sure this condition is correct. We can have DSC but not eDP DSC
> support.
> 

AFAIK PSR-SU displays use eDP exclusively, so we shouldn't have to worry 
about this case.

>> +		return true;
>> +
>> +	pic_height = stream->timing.v_addressable +
>> +		stream->timing.v_border_top + stream->timing.v_border_bottom;
>> +	slice_height = pic_height / stream->timing.dsc_cfg.num_slices_v;
>> +
>> +	if (slice_height) {
>> +		if (config->su_y_granularity &&
>> +		    (slice_height % config->su_y_granularity)) {
>> +			WARN(1,
> 
> We don't use WARN in display/dc or display/modules. DC_LOG_WARNING
> might be better, or log it in the caller.
> 
> Harry
> 
>> +			     "%s: dsc: %d, slice_height: %d, num_slices_v: %d\n",
>> +			     __func__,
>> +			     stream->sink->dsc_caps.dsc_dec_caps.is_dsc_supported,
>> +			     slice_height,
>> +			     stream->timing.dsc_cfg.num_slices_v);
>> +			return false;
>> +		}
>> +
>> +		config->su_y_granularity = slice_height;
>> +	}
>> +
>> +	return true;
>> +}
>> diff --git a/drivers/gpu/drm/amd/display/modules/power/power_helpers.h b/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
>> index 316452e9dbc9..bb16b37b83da 100644
>> --- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
>> +++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
>> @@ -59,4 +59,7 @@ void mod_power_calc_psr_configs(struct psr_config *psr_config,
>>   		const struct dc_stream_state *stream);
>>   bool mod_power_only_edp(const struct dc_state *context,
>>   		const struct dc_stream_state *stream);
>> +bool psr_su_set_y_granularity(struct dc *dc, struct dc_link *link,
>> +			      struct dc_stream_state *stream,
>> +			      struct psr_config *config);
>>   #endif /* MODULES_POWER_POWER_HELPERS_H_ */
> 

-- 
Hamza

Re: [PATCH v2] drm/amd/display: fix PSR-SU/DSC interoperability support

[Leo Li]

On 1/5/23 15:07, Hamza Mahfooz wrote:
> On 1/5/23 13:29, Harry Wentland wrote:
>>
>>
>> On 1/5/23 12:38, Hamza Mahfooz wrote:
>>> Currently, there are issues with enabling PSR-SU + DSC. This stems from
>>> the fact that DSC imposes a slice height on transmitted video data and
>>> we are not conforming to that slice height in PSR-SU regions. So, pass
>>> slice_height into su_y_granularity to feed the DSC slice height into
>>> PSR-SU code.
>>>
>>> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
>>> ---
>>> v2: move code to modules/power.
>>> ---
>>>   .../drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c |  3 ++
>>>   .../amd/display/modules/power/power_helpers.c | 35 +++++++++++++++++++
>>>   .../amd/display/modules/power/power_helpers.h |  3 ++
>>>   3 files changed, 41 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c 
>>> b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
>>> index 26291db0a3cf..872d06fe1436 100644
>>> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
>>> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
>>> @@ -122,6 +122,9 @@ bool amdgpu_dm_link_setup_psr(struct 
>>> dc_stream_state *stream)
>>>           psr_config.allow_multi_disp_optimizations =
>>>               (amdgpu_dc_feature_mask & DC_PSR_ALLOW_MULTI_DISP_OPT);
>>> +        if (!psr_su_set_y_granularity(dc, link, stream, &psr_config))
>>> +            return false;
>>> +
>>>           ret = dc_link_setup_psr(link, stream, &psr_config, 
>>> &psr_context);
>>>       }
>>> diff --git 
>>> a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c 
>>> b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
>>> index 9b5d9b2c9a6a..4d27ad9f7370 100644
>>> --- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
>>> +++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
>>> @@ -916,3 +916,38 @@ bool mod_power_only_edp(const struct dc_state 
>>> *context, const struct dc_stream_s
>>>   {
>>>       return context && context->stream_count == 1 && 
>>> dc_is_embedded_signal(stream->signal);
>>>   }
>>> +
>>> +bool psr_su_set_y_granularity(struct dc *dc, struct dc_link *link,
>>> +                  struct dc_stream_state *stream,
>>> +                  struct psr_config *config)
>>> +{
>>> +    uint16_t pic_height;
>>> +    uint8_t slice_height;
>>> +
>>> +    if (!dc->caps.edp_dsc_support ||
>>> +        link->panel_config.dsc.disable_dsc_edp ||
>>> +        
>>> !link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_SUPPORT ||
>>> +        !stream->timing.dsc_cfg.num_slices_v)
>>
>> I'm not sure this condition is correct. We can have DSC but not eDP DSC
>> support.
>>
> 
> AFAIK PSR-SU displays use eDP exclusively, so we shouldn't have to worry 
> about this case.

Right, the dc_link here should only be eDP. I suppose that isn't quite
clear.

Maybe add this as part of the condition?

if (!(link->connector_signal & SIGNAL_TYPE_EDP))
     return true;

Thanks,
Leo

> 
>>> +        return true;
>>> +
>>> +    pic_height = stream->timing.v_addressable +
>>> +        stream->timing.v_border_top + stream->timing.v_border_bottom;
>>> +    slice_height = pic_height / stream->timing.dsc_cfg.num_slices_v;
>>> +
>>> +    if (slice_height) {
>>> +        if (config->su_y_granularity &&
>>> +            (slice_height % config->su_y_granularity)) {
>>> +            WARN(1,
>>
>> We don't use WARN in display/dc or display/modules. DC_LOG_WARNING
>> might be better, or log it in the caller.
>>
>> Harry
>>
>>> +                 "%s: dsc: %d, slice_height: %d, num_slices_v: %d\n",
>>> +                 __func__,
>>> +                 stream->sink->dsc_caps.dsc_dec_caps.is_dsc_supported,
>>> +                 slice_height,
>>> +                 stream->timing.dsc_cfg.num_slices_v);
>>> +            return false;
>>> +        }
>>> +
>>> +        config->su_y_granularity = slice_height;
>>> +    }
>>> +
>>> +    return true;
>>> +}
>>> diff --git 
>>> a/drivers/gpu/drm/amd/display/modules/power/power_helpers.h 
>>> b/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
>>> index 316452e9dbc9..bb16b37b83da 100644
>>> --- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
>>> +++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
>>> @@ -59,4 +59,7 @@ void mod_power_calc_psr_configs(struct psr_config 
>>> *psr_config,
>>>           const struct dc_stream_state *stream);
>>>   bool mod_power_only_edp(const struct dc_state *context,
>>>           const struct dc_stream_state *stream);
>>> +bool psr_su_set_y_granularity(struct dc *dc, struct dc_link *link,
>>> +                  struct dc_stream_state *stream,
>>> +                  struct psr_config *config);
>>>   #endif /* MODULES_POWER_POWER_HELPERS_H_ */
>>
> 

Re: [PATCH v2] drm/amd/display: fix PSR-SU/DSC interoperability support

[Harry Wentland]

On 1/5/23 15:12, Leo Li wrote:
> 
> 
> 
> On 1/5/23 15:07, Hamza Mahfooz wrote:
>> On 1/5/23 13:29, Harry Wentland wrote:
>>>
>>>
>>> On 1/5/23 12:38, Hamza Mahfooz wrote:
>>>> Currently, there are issues with enabling PSR-SU + DSC. This stems from
>>>> the fact that DSC imposes a slice height on transmitted video data and
>>>> we are not conforming to that slice height in PSR-SU regions. So, pass
>>>> slice_height into su_y_granularity to feed the DSC slice height into
>>>> PSR-SU code.
>>>>
>>>> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
>>>> ---
>>>> v2: move code to modules/power.
>>>> ---
>>>>   .../drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c |  3 ++
>>>>   .../amd/display/modules/power/power_helpers.c | 35 +++++++++++++++++++
>>>>   .../amd/display/modules/power/power_helpers.h |  3 ++
>>>>   3 files changed, 41 insertions(+)
>>>>
>>>> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
>>>> index 26291db0a3cf..872d06fe1436 100644
>>>> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
>>>> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
>>>> @@ -122,6 +122,9 @@ bool amdgpu_dm_link_setup_psr(struct dc_stream_state *stream)
>>>>           psr_config.allow_multi_disp_optimizations =
>>>>               (amdgpu_dc_feature_mask & DC_PSR_ALLOW_MULTI_DISP_OPT);
>>>> +        if (!psr_su_set_y_granularity(dc, link, stream, &psr_config))
>>>> +            return false;
>>>> +
>>>>           ret = dc_link_setup_psr(link, stream, &psr_config, &psr_context);
>>>>       }
>>>> diff --git a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
>>>> index 9b5d9b2c9a6a..4d27ad9f7370 100644
>>>> --- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
>>>> +++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
>>>> @@ -916,3 +916,38 @@ bool mod_power_only_edp(const struct dc_state *context, const struct dc_stream_s
>>>>   {
>>>>       return context && context->stream_count == 1 && dc_is_embedded_signal(stream->signal);
>>>>   }
>>>> +
>>>> +bool psr_su_set_y_granularity(struct dc *dc, struct dc_link *link,
>>>> +                  struct dc_stream_state *stream,
>>>> +                  struct psr_config *config)
>>>> +{
>>>> +    uint16_t pic_height;
>>>> +    uint8_t slice_height;
>>>> +
>>>> +    if (!dc->caps.edp_dsc_support ||
>>>> +        link->panel_config.dsc.disable_dsc_edp ||
>>>> +        !link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_SUPPORT ||
>>>> +        !stream->timing.dsc_cfg.num_slices_v)
>>>
>>> I'm not sure this condition is correct. We can have DSC but not eDP DSC
>>> support.
>>>
>>
>> AFAIK PSR-SU displays use eDP exclusively, so we shouldn't have to worry about this case.
> 
> Right, the dc_link here should only be eDP. I suppose that isn't quite
> clear.
>

Right, I was thinking of DSC but PSR-SU is eDP only.

Harry
 
> Maybe add this as part of the condition?
> 
> if (!(link->connector_signal & SIGNAL_TYPE_EDP))
>     return true;
> 
> Thanks,
> Leo
> 
>>
>>>> +        return true;
>>>> +
>>>> +    pic_height = stream->timing.v_addressable +
>>>> +        stream->timing.v_border_top + stream->timing.v_border_bottom;
>>>> +    slice_height = pic_height / stream->timing.dsc_cfg.num_slices_v;
>>>> +
>>>> +    if (slice_height) {
>>>> +        if (config->su_y_granularity &&
>>>> +            (slice_height % config->su_y_granularity)) {
>>>> +            WARN(1,
>>>
>>> We don't use WARN in display/dc or display/modules. DC_LOG_WARNING
>>> might be better, or log it in the caller.
>>>
>>> Harry
>>>
>>>> +                 "%s: dsc: %d, slice_height: %d, num_slices_v: %d\n",
>>>> +                 __func__,
>>>> +                 stream->sink->dsc_caps.dsc_dec_caps.is_dsc_supported,
>>>> +                 slice_height,
>>>> +                 stream->timing.dsc_cfg.num_slices_v);
>>>> +            return false;
>>>> +        }
>>>> +
>>>> +        config->su_y_granularity = slice_height;
>>>> +    }
>>>> +
>>>> +    return true;
>>>> +}
>>>> diff --git a/drivers/gpu/drm/amd/display/modules/power/power_helpers.h b/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
>>>> index 316452e9dbc9..bb16b37b83da 100644
>>>> --- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
>>>> +++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.h
>>>> @@ -59,4 +59,7 @@ void mod_power_calc_psr_configs(struct psr_config *psr_config,
>>>>           const struct dc_stream_state *stream);
>>>>   bool mod_power_only_edp(const struct dc_state *context,
>>>>           const struct dc_stream_state *stream);
>>>> +bool psr_su_set_y_granularity(struct dc *dc, struct dc_link *link,
>>>> +                  struct dc_stream_state *stream,
>>>> +                  struct psr_config *config);
>>>>   #endif /* MODULES_POWER_POWER_HELPERS_H_ */
>>>
>>